MrJmak223's channel

I take it the foam you use is polystyrene? If so do you need a hot wire cutter to shape it, or can you use a knife?

Do you know wheterh the gun can take metal slides meant for the Marui Glock 17? Because Id like proper trades on it.

Another good vid. Is there any way you can describe/ show how the locking mechanism for the cylinder works? I cant figure it out, and your info would be appreciated.

I would love to see what that bullet would do to an armoured personel carrier!

Good vid mate. Im interested in getting a Glock to "customise", but dont know what to get. Ive spoken to Redwolf about the new WE glock 17 and they say that parts meant for the Marui Glock 17 will fit like slides and others. So do you think it is worth the risk and saving some money, or buy a TM ...

That is an awesome little pistol! what reange will it shoot to accurately?

Was fitting the PGC slide and barrel very difficult? I take it wasnt just a drop fit you had to file down your rails on the frame and the slide?

Good vid. Will parts meant for the Marui Glock 17 like loading nozzles, Hop units and Tight bore inner barrels fit this gun? It would certainly be usefull for replacement parts instead of WE's usual proprietary parts that you cant get.

Thanks for posting the vid, some really usefull info on the gun. So when you say 100% TM Compatible will a PGC metal slide and barrel set meant for the TM Glock 17 fit this ok? So I could have proper markings and a better finish on the slide? Also will it take the loading nozzle and hop rubber fr...

Pretty good vid. Do you know whether things like tight bore inner barrels for Tokyo Marui glock 17's will fit? Also things like the loading nozzle and aftermarket slides and barrels with the correct trades?

How long have you had the gun for, and has the sear/ hammer worn or deformed so the gun will shoot full auto un controlably? If so do you know whether you can use Tanaka parts to replace the worn ones?

I think the vids you do with the slo mo and the teasers all add to reviewing the gun overall, and who cares whether someone disagrees with that. Keep on doing what you do, your vids are pretty damn usefull, sepecially for people who are looking to buy a new gun.

@124thDragoon Yeah that and the fact that the trigger pull is ridiculous, so any accurate shot is ruined by the amount of force needed just to shoot it.

Good vid. Do you know whether there will be anything more than likely to go wrong with this gun, that cant be replaced? Also do you know which parts (if any) are compatible with Marui parts or aftermarket parts for the Marui glock 17? Like hop rubbers, loading nozzles and metal slides and barrels...

Good vid. Do you know whether the WE lugers have had the problems with the hammer and sear wearing out after very little use, causing the gun to fire full auto uncontrolably? If not then do you know of any parts that can be used to replace them, or could you make a steel replacement?

Is the gun compatible with Marui parts? Like the loading nozzle, hop rubber and aftermarket metal slides and outer barrels incase I want to swap it out for one with correct markings?

How has the gun preformed skirmishing? And has it had anything go wrong with it?

Really good vid mate. Do you know whether any other parts meant for the marui glock 17 will fit? Like the loading nozzle, hop rubber and mag release? Incase I need to replace anything?

That is pretty cool, the sights work really well. If you dont mind me asking where did you get them from and how much?

Pretty good vid. Do you know whether the loading nozzle inside the blowback unit is compatible with tokyo marui nozzles?

This is a really interesting vid, thanks for posting you dont get to see these guns in action very often at all. How far were you shooting at, and on a good day what group could you get at that distance?

Pretty cool vid. Out of the two guns, which one would you say is better in terms of accuracy, reliability and amount of parts availible for it?

What was the velocity? That is a very good test, thanks for posting the vid.

Good vid mate. Another reason to buy quality ammunition is that if the cases are good then you can reload them, meaning you can replenish you ammount of ammunition for alot cheaper than buying factory ammunition.

How easy was it to fit the kit? And if you have any experience with guarder kits are they the same to fit?

Have you any experience with fitting guarder metal body kits to this gun? If so are they very easy to fit, and how was the preformances after?

Did you manage to find the safety?

Really good vids mate. How easy do you find it to fit the PGC Metal slides and barrels to the marui glocks? Also have you ever fitted a guarder metal kit to a marui M92? If so how easy is it?

Another really good vid. What side arm would you recomend for around £100, that will work in cooler weather? It will also double up as a primary in CQB, so will need realatively well priced magazines. Any information on which guns you have experience with within that range would be appreciated.

Do you know wheterh you can fit high flow valves to the tanfoglio witness 1911? Its .177 and C02 Blowback. Any info would be appreciated.

I agree with what you are saying. Here in the UK we have gang violence, with knives and guns. Drugs, underage pregnancy and many other problems. You need to be greatfull that you can deffend yourself with more than your bare hands, because thats all Ive got here. And alot of it stems from lack of...

Shows what you know then. The whole point of training and firing thousands of rounds in different and stressful circumstances is to prepare you to react as best you can when someone is going to harm you or your family. The more you train with any weapon system the more effective you will become w...

Is the recoil on par with most Gas blowback rifles, or alot less noticeable?

Good vid. Does the gun use the Western arms gas and trigger system? If so will most aftermarket parts for those systems fit this gun?

Good vid. How accurate is the KJW M700 in its stock form? And do you kow what inner barrels will fit it, aswell as hop up rubbers? Also do you have any concerns about parts of the bolt or trigger mech breaking in the KJW?

Another really good vid. You may be surprised to hear that the 10/22's are quite popular here in the UK. As the only semi auto's we are allowed are .22's. Have you used any sub sonics with the gun, and did it cycle the same as high velocity rounds do?