MrBinkynator
Loading...
-
MrBinkynator
liked
1 year ago
Align Trex 500 BEC Speed Controller Setup
Setting up the Align BEC is simple if you follow the right steps.
By Steve H (Biggles)
-
MrBinkynator
commented
1 year ago
Comanche 3 Model Rocket Launch - 3 stages, 3 pops
You can hear each of the three stage-separation pops as the Comanche 3 model rocket ascends 1/2 mile.
I'd suggest building it as it comes with the two long streamers and see what you think. Again, with a chute, it's going to drift too far if there's any breeze whatsoever!
-
MrBinkynator
commented
1 year ago
Comanche 3 Model Rocket Launch - 3 stages, 3 pops
You can hear each of the three stage-separation pops as the Comanche 3 model rocket ascends 1/2 mile.
@1969captainron The first two stages are just fins, so they tumble to the ground with no problems (if you can find them!). The third (top) stage comes down pretty quick and often pulls a fin away from the cardboard tube when it hits (which you can just re-glue). Really, though, it goes so high (v...
-
-
MrBinkynator
liked
1 year ago
AR6400 with Micro Brushless ESC Test
Demo of AR6400 RX Module, shows typical servo centering jitter and first test of a directly connected TGY 3A Micro ESC driving a 4.6g 3700kv Brushl...
-
autogiro C30 flight 2 (scale 1/4).wmv
The autogiro Cierva C30 weighs about 6,5 kg and has a rotor diameter of 2,56 m. The autogiro is a 'scratsh build' design and I had to do a lot of r...
-
Apache Longbow fully aerobatic autogyro
RC autogyro which looks like the awesome Apache Longbow. Loops and rolls. More info on rcgroups.com.
-
Microgyre #2
40cm pour 30g . http://projetcnc.blogspot.com
-
-
MrBinkynator
liked
1 year ago
Micro autogyro 06 Jan 08
A 10 gram autogyro with magnetic actuator for rudder control
-
Airlfoil blades on Twirl autogyro
This is what I'm up to with my Twirl, experimenting and having fun.
-
MrBinkynator
liked
1 year ago
HeliMix Canopy Mounts
Getting tired of mounting your canopy every time you fly? So did I, and last night, I came up with an idea that has been tested and works. It is ...
-
MrBinkynator
liked
1 year ago
TREX 450 ONBOARD CAMERA FIGURE EIGHTS W/LOOP
T REX 450-CANNON SD 400-HOME MADE CAMERA MOUNT. JUST SOME FF FLIGHT AND FIGURE EIGHTS WITH A LOOP. CAMERA AND MOUNT WAY TO HEAVY FOR AN ALL STOCK...
-
Blade 400 with Led lights
I had nothing to do last night and the Blade was running perfectly and didn't need any attention, and I had a set of those cheap $9 leds from Hobby...
-
-
MrBinkynator
commented
1 year ago
learning how to auto without a sim
for all those who don't have a sim to practice on, these are the steps I took.
Very cool! Thanks! :)
-
MrBinkynator
liked
1 year ago
-
About MrBinkynator
Phantom of the Floppera
Visit http://georgewhiteside.net/... for more information!
Test run of my (d)iskette (O)rgan doing Toccata & Fugue.
People h...
2,289,358 views
MrBinkynator said:
It's nerdtastic.
+ One more: Likedshow less