Motocycleman56's channel

A day of forging. 6-13-09. Don heated his blade till it lost magnetic properties, then quenched it in an oil bath to harden it.

This is the first time, I am trying to get the forge up to welding temperatures. The forced air burner is based on a design by Tim Zowada. The ...

This video will give anyone interested in blacksmithing the information they need to forge and heat treat carbon steel and make there own tools.

...

Running air atomized oil burner-1

Small Waste Oil Burner - 4

Small Waste Oil Burner - 3

Горелка на отработанном масле Small Waste Oil Burner - 1

This is a combination of a babington and a venturi burner, i researched burners on youtube and came up with this, The burner tube is stainless stee...

Melted brass for the first time

I was Suprised at the tempreture required

the furnace was white hot with no smoke once it got some good heat in to...

Oil burner and Foundry

This is the waste oil burner i was working on in the last video

It works on wvo and wmo, it runs on duel fuel LPG to start w...

The project that i have been working on to use waste vegtable oil along with the furnace to melt aluminium which i recently upgraded from an old ga...

After many question on how the burner works i did a short video on its construction and the parts in it and where i got the parts form

I hope its ...

Arkansas life2 Entereainment comedy

Arkansas life comedy .Sammygirl2238 did v for vendetta trailer

arkansas snow 2

arkansas life5

Bored...xD

http://www.wood-gasificatio...

What are the environmental impacts of gasification? Let's find out now in this video. Gasifiers available at http:...

http://www.USH2.com/potassi... Radiation Dosimeter STICKER - In Stock and Shipping Today. The RadSticker is a simple sti...

http://www.victorygasifier.com

This is a welcome video for Hans. He is getting off the grid and plans some vehicle gasification as well. Thanks Hans.

http://www.greenpowerscienc...

This 100 watt + Stirling Engine is the only Stirling I have ever tested that would take a finger off without a th...

http://www.greenpowerscienc... PART 1 OF THE DIY PROJECT. SCRAP 70 GALLON WATER TANK I FOUND ON THE SIDE OF THE ROAD.

Convert a standard 500 watt AC Halogen work light to an energy efficient Direct Current 35 watt flood light in under one hour. The process uses "of...

For additional information about this presentation please see the BLOG entry at http://smartscarecrow.blogs......

Please visit my web site http://alt-nrg.org/ for all the latest OU news.

I'm tapped out. Too many late nights at the work bench. Your help would b...

Someone suggested I give one of these a try. Looks real good, inexpensive and not too tough to make. Figured I'll give it a try in between other pr...