-
1 year ago
Wiped Crane Cam & Lifters
This is what i found when i pulled out the cam from my 355 SBC.
The cam is a Crane HMV-272 .454/.480 Lift 215/215 Duration 112lsa Hydraulic Flat-T...
Z28MeTaLHeAd • 10,434 views
MegaGuitarboss
commented:
-
1 year ago
Nasty chevy 305 400hp
400hp 305 ported heads custom camshaft 850hp holley dp 9.5:1 compression, just spare parts i had laying around. file fit moly rings stock crank and...
jrkoff • 64,727 views
MegaGuitarboss
commented:
@215jami the vortec heads make tha old humps look like crap vortecs flow better and produce better hp than the humps ever thought about
-
1 year ago
Chevy SBC: Single Flowmaster Super 40, then dual Super 40's, then dual Super 44's
First: 2.5" Y-pipe to single 3" exhaust, single Flowmaster Super 40 dumped.
Second: True Dual 3" exhaust, dual Flowmaster Super 40's dumped.
Thir...
04SilveradoMykk • 41,917 views
MegaGuitarboss
commented:
@Ry4nH4m1ll correction when an o2 sensor is missing or bad it causes the engine to run rich not lean it dose this because when the sensor is bad or gone the computer thinks that the converter is not working so it will dump more fuel to try and heat up the converter so that it will get a signal fr...
-
1 year ago
81 chevy shortbed dual exhaust
this is the exhaust on my 1981 chevy scottsdale shortbed. it is dual exhaust, factory manifolds, with 2 1/4 inch pipe going to thrush turbo muffler...
BigSlimm79 • 2,835 views
MegaGuitarboss
commented:
@WOODSON71190 you dont need backpressure its a myth no engine needs or wants backpressure
-
1 year ago
Halo Wars Strategy - Marine Rush
Get Paid To Play Video Games - Details @
EthanCaineDotCom • 67,953 views
MegaGuitarboss
liked
-
1 year ago
Squier Classic Vibe demo
Listen to the brand new Squier Classic Vibe Telecaster. In this video we also compare it with a US Standard Telecaster.
You can read the full revi...
audiofanzinetv • 136,319 views
MegaGuitarboss
commented:
@harleyrider916 pine is what was used on the first fender guitar the 1951 esquire
-
1 year ago
Never Put Diesel In A Petrol Car
My mate put diesel in his Polo, then proceded to fix the problem, by trying to start it, amazingly it did eventually start
e1westy • 77,800 views
MegaGuitarboss
commented:
@Texarmageddon no in texas you cannot cut off a converter if you get caught it is a 2500 dollar fine
-
1 year ago
500hp Chevy Truck: Loud Exhaust and Burnout
This is my first truck. I had a video on here when it had a 305 V8 in it, but I decided to put my spare NACAR Late Model Stockcar motor in it! It w...
racekid691792 • 24,980 views
MegaGuitarboss
commented:
@nickrd10bk single exhaust will always be louder than duals and also a properly designed single exhaust will make more power than duals
-
1 year ago
1982 CHEVY CHERRYBOMB GLASSPACKS
Here is a video of me revving up my truck with my 8 inch cherrybomb glasspacks.
4X4HeavyChevy • 32,338 views
MegaGuitarboss
commented:
@4X4HeavyChevy yes you do infact put 2 diffrent mufflers on the same exhaust take for instance the new ss camaro they have 2 resonators wich in reality are glasspacks and they also have the 2 large primary mufflers located at the back of the car
-
1 year ago
Go Kart run down the street
Here it is guys. I wasnt going full speed as my brakes werent working spot on but it gives u a ruff idea on the speed. It seems slow in the video b...
brendonv101 • 19,314 views
MegaGuitarboss
commented:
@brendonv101 im gonna take it asy on you since you are a kid 2 hp will never hit 50 simply because it dosent have the power to push you and the cart through the air fast enough even at 50 mph there is an insane amount of drag producd by the air and do you know what produces horsepower? rpms do to...
-
1 year ago
Briggs 5HP Starts! ...and dies.
Carburetor got loose.
briggsandclones • 9,971 views
MegaGuitarboss
liked
-
1 year ago
BBQ Fire Pit Grill Made with a Harbor Freight Mig Welder 90 amp Flux-Cored
This is my very first welding project. I used a 90 amp harbor freight flux-cored mig welder. I was happy with the finished product. We use this ...
gws1977 • 6,592 views
MegaGuitarboss
commented:
@sickdeathshappen flux core burns hotter penetrates better and makes for a stronger weld you just have to know how to weld with it
-
1 year ago
Jiffy Lube Scam - Pay for work never done
Jiffy Lube will charge you for work never done, here's another report: http://cbs4boston.com/iteam...
*update*
Here are th...
achille • 127,814 views
MegaGuitarboss
commented:
the first one the fuel filter they marked was not the fuel filter it was a fuel pump the filter on that jeep is inline with the fuel line i just replaced one the other day
-
1 year ago
Car Falls Off Lift!!!
A vehicle at a garage slipps off the lift arms and some how manages to get stuck 1 foot off the ground. Somehow the vehicle suffered very little da...
Digitalme1984 • 485,633 views
MegaGuitarboss
commented:
thats why i hate a 2 post lift
-
1 year ago
93 Honda Accord Straight Pipe clip (fail start..lol)
Hey this is my 1993 accord with the F22a6 motor, no resonator and no muffler.. straight pipe back!
for some reason it didnt wanna start. Never doe...
andrewJeep • 4,493 views
MegaGuitarboss
commented:
@AngryBassist66623 ha ha ha you have no clue what your talking about 1 engines dont need backpressure if the motor has to work to push the exhaust out its just wasteing power and 2 a straight pipe will not cause burnt valves and in turn burnt valves will not cause a cracked block the valves are i...
-
1 year ago
chevy 454 crewcab dually
this is my 78'silvarado crewcab dually whit a 454 bigblock and 400 turbo trans.
matiesb • 5,235 views
MegaGuitarboss
commented:
@slammed78chevy no sir you dont know anything about motors the motor stock in that truck was 255 hp and 395 torque
-
1 year ago
80 CHEVY K30 pulling out a truck and trailer northwood water cross 2008
john pulls a stuck truck out
redneckmud79 • 15,769 views
MegaGuitarboss
commented:
1980 wasnt k30 in 1980 they were c30s
-
1 year ago
Piece o' Junk Powerjoke
On my way to school i came across this ford powerstroke that was on the progress of dieing. A few seconds after the truck pulled over and i looked ...
countryboy5566 • 125,117 views
MegaGuitarboss
commented:
looks like a turbo goin out ta me we have one in our shop right now that dose tha same thing as far as ford quality i know the owner of a local ford dealership and i asked him about buying a new ford diesel and his exact words were ill sell you one but you dont want it i asked him why he said eve...
-
1 year ago
Camaro 302 in actions
PAblo Colon from Dorado, P.R.
javier08c • 19,427 views
MegaGuitarboss
commented:
@ChevyLover1990 the chevy 302 and for 302 are not that diffrent since they share the same bore and stroke
-
1 year ago
Demolition Derby upright headers from Randy's Headers
These headers are 1 1/2 tube 4into 1 with 6 inch tips. They are on a 355 small block Chevy engine. Have several styles for small block Chevy, Ford...
brmd913 • 9,072 views
MegaGuitarboss
commented:
why didnt you join both headers into a single pipe to improve the scavageing effect from bank to bank you could easily pick up a sizeable chunk of horsepower by doing that
-
1 year ago
75 chevy 355
355 derby motor i built and headers i made
wsteinbeck86 • 3,728 views
MegaGuitarboss
commented:
ahh finaly someone who gets it a 2 into 1 style exhaust scavanges the exhaust gas better the proof is in the smooth exhaust note when rev'd that type of setup would be good for 25 additional hp over two seperate headers
-
1 year ago
Dodge Cummins 5.9 vs chevy Duramax 6.6 drag race 15 second black smoke
This is a drag race at 2009 rockymountain cummins truck fest between an older dodge 5.9 diesel cummins dully vs a newer Chevrolet Duramax 6.6 diese...
redneckman454 • 150,701 views
MegaGuitarboss
commented:
@RovingLandRover hmmm chevy is cheap crap huh? i guess thats why my shop has ta rebild cummins after cummins due to broke rings chewin up the cylinder walls guess how many duramax we have to rebuild ? ZERO matter of fact weve never had a duramax come in our shop with a problem
-
1 year ago
82 Chevy C-10 350 cammed w/ glasspacks idling.
My Chevy project underway with the essentials perty much done. Engine, intake, cam, carb, headers and glasspacks. Now the body is next.
jpsanchez72 • 63,546 views
MegaGuitarboss
commented:
@labreck12 what im saying is that you do no want back pressure a chambered muffler offers less backpressure due to is larger internal volume it takes more exhaust gas to build backpressure in a chambered muffler than it dose in a glasspack type muffler
-
1 year ago
76 Cheverolet truck chevy C/K10 327 SMALL BLOCK AWSOME!!
this is my 76 c10 with a 327 small block from a 67 corvette and a a matching 4 spd trans. Camel hump heads, cam, hooker headers, edelbrock carb, w...
beemerman540 • 44,999 views
MegaGuitarboss
commented:
@apsasm07 1000 hp from a 327 lmao not likely it is possible but theres no way you could drive it on the street it would be way to radical hell a 1000 horse big block wouldnt even be streetable just shoot for 1 hp per cubic inch and be happy
-
1 year ago
1980 chevrolet 1500 350 comp cam gear drive
1980 chevy 1500 350 30. over, flat tops,gear drive,compcam,camel hump heads,edelbrock intake,holley carb, msd all the goods hooked to a turbo 350 w...
motomaster282 • 55,860 views
MegaGuitarboss
commented:
i would ditch them old heads and put some vortec heads on they are just a better design
-
1 year ago
1973 chevy C10 454 Rat Rod Burnout
This is a burnout i did shortly after it bought this 73 chevy with a 454 with a 350 tranny pushin a little over 400 horses doing a burnout on my ba...
evanbetz • 71,811 views
MegaGuitarboss
commented:
@Muzicsallitsworth well there is no 1 definition for a rat rod but that truck dose have a shitty body just look at the horrible rust above the wheel wells
-
1 year ago
Unknown Hinson - Fish Camp Woman (good audio)
Unknown Hinson performing "Fish Camp Woman" at Skipper's Smokehouse in Tampa for WMNF's Rockabilly Ruckus on February 16, 2008
easygrip • 21,772 views
MegaGuitarboss
commented:
@easygrip saw him live playin that guitar its a revernd his backup guitar that i saw was a gibson sg
-
1 year ago
1970 Chevrolet Chevelle 454 SS BIG HORSEPOWER ACTION
Not so Mello Yello, my mega-horsepower '70 LS-5 Chevelle SS 500+ Horsepower
samspace81 • 25,610 views
MegaGuitarboss
commented:
ls5 didnt come out till 71
-
1 year ago
1970 Chevelle LS6 454 Burnout
Tell me what you think!
Kuson2 • 17,418 views
MegaGuitarboss
commented:
@Kuson2 ls6 454s made 450 but that was chevys claim real world was closer to 480-490
-
1 year ago
1970 454 LS6 Chevelle by TheEngineWorks.com
This is pass #2.. felt #1 was not good enough! lol
TheEngineWorksCom • 112,653 views
MegaGuitarboss
commented:
@homeskillet1962 are you retarded the ls6 chevelle was the baddest
-
1 year ago
305 chevrolet whit 350 cam and flowmaster 40
buick regal 1983 305 whit new 350 stock cam after break in
bigdon2241 • 29,848 views
MegaGuitarboss
commented:
you do realize that a stock 350 cam is the same cam that was in a stock 305 in other words its the same cam
-
1 year ago
chevy 454 drive up
my 88 chevy pickup crew cab 3+3 dually with 454 big block with magnaflow mufflers
fastbubba1983 • 364 views
MegaGuitarboss
commented:
not magnaflowa those are chambered type mufflers like a flowmaster magnaflows dont sound that good
-
1 year ago
My 85 Chevy Silverado C30 Dually with 454 and straight pipes
all stock other than cut pipes
silveradodually454 • 13,057 views
MegaGuitarboss
commented:
@mydejavooo1 horsepower sells cars torque wins races that pull you feel when you mash on the gas thats torque
-
1 year ago
Lucky's Speed Elite Street Phase III - 525HP - 2010 Camaro SS Cammed - Stimulator Cam
Modifications Include: Halltech Cold Air Intake, 160* Thermostat, American Racing 1-7/8" LongTube Headers - Coated with DuraChrome 2000* Coating, C...
LuckysSpeed • 4,105 views
MegaGuitarboss
commented:
@LuckysSpeed well im one of the guys from white oak muffler and brake weve done a few small repairs for you guys do you guys know anything about big block chevies im tryin ta find out how much cam lift i can get by with on what i think are stock valve springs its a fresh motor so the springs are ...
-
1 year ago
Graham Whitford: Guitar Center King of the Blues '09 Finalist
Guitar Center King of the Blues finalist, Graham Whitford's performance from the GC King of the Blues Grand FInals - Nov 12th, 2009 at the House of...
GuitarCenterTV • 34,097 views
MegaGuitarboss
commented:
@bondfreak323 i dont
@k9forkids rotella has zinc