Magnetmad's channel
Loading...
71
subscribers
81,039
video views
Uploaded videos
1-10 of 12-
Pulse motor 3 test
Magnetmad
71 views
This is the last video of this setup.. Ok, so now i think i can move on to the next stage which will be fitting a second disc to try and get more voltage out + some other p...
-
Pulse Motor Part 2
Magnetmad
119 views
Slightly different setup from my first video, still looking to increase the output we have the same voltage here but there is no load on it and of cause when it's loaded it...
-
Pulse motor Basic setup
Magnetmad
216 views
Quick look at a basic pulse motor using 6 volt battery as a power source, note the 2 volt return from the second coil. I am working on getting the voltage up some more but...
-
Gauss gun. Fun
Magnetmad
177 views
Quick test on a Gauss rail Gun for fun
-
Rig3.flv
Magnetmad
573 views
So this is my first attempt to convert the magnetic movement (shown in my first video) into an energy source that can be harvested and used to assist in the process of inst...
-
Metal Shielding study, Video 1 Aug
Magnetmad
2,231 views
Quick look at the effect of metal shielding on a large wheel setup, This video shows some slowing of the wheel which i have filmed.
The counter is *2 i fitted 2 reflectors...
-
Test with metal shields 2 without
Magnetmad
821 views
Ok this is video 2 with no metal shield on the magnets, In video 1 i have fitted and timed the run-down to see if it makes any difference.It would appear that a slight gain...
-
Metal shields 1 with
Magnetmad
924 views
This is video 1 of 2
Test using metal shields,placed at the exit they seem to reduce the drag and increase the running time, the u magnet stator is to weak to run this at ...
-
New look Whipmag
Magnetmad
2,234 views
Quick look at my lastest attempt to add to the whipmag movment..!! This model allbeit not yet ready to do anything intresting , it shows my bearingless design, the AGW is t...
-
Magnetic Bearing test
Magnetmad
47,748 views
Quick test on a setup using no metal bearings, hence reducing friction and allowing the S/L of the center disc to find its own comfort zone to the stators
Advertisement
About Magnetmad's channel
more
less
Play all(12)