Lisle Corporation Tools

Kit Makes Testing Relays or Live Circuits Quick and Easy. Includes Terminal Lead Wire set, Test Leads, eight Relay Test Jumpers and Relay Puller Pliers.

Redesigned for Newer 3.5L and 3.6L GM Engines. Also Works on GM V6 2.8L, 3.1L and 3.4L. Quickly removes push rods so you can replace the intake gasket. No need to loosen and retighten the rocker arm. The tool pivots th...

Installs harmonic balancers or drive pulleys that are pressed on the crankshaft. The set includes a driving screw, thrust bearing and ten threaded adapters necessary to work on a wide range of domestic and some import harm...

Unique design provides extra leverage when disconnecting quick connect coupling air conditioning and fuel lines. Use with 5/16", 3/8" or 1/2" adapters from the Lisle 37000 or 39400 Disconnect Tool Sets. The pliers' forks h...

Use with an impact wrench to quickly stretch pipes. Collet sets expand pipes from 1-5/8" to 4-1/4". The tool can be used on the vehicle. The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe exp...

For large capacity crank cases or radiator systems.The drain holds 60 quarts and is equipped with four rollers and a handle for transport and easy positioning under trucks. The pump is AC powered. With a 12' hose, the pump...

Removes and installs pressed on power steering, alternator and air pump pulleys. Makes removing pressed on pulleys an easy job. The unique puller body completely houses the pulley hub to prevent slipping on even the tighte...

11 and 17 piece kits provide technicians with assortments of back probe pins with standard banana plug connections. Straight, 45°, and 90° back probe pins with 4mm standard female banana plug connectors. Angled probes for ...

Includes adapter for use with threaded caps on Ford surge tanks, straight extension and an additional 45° elbow for hard-to-reach applications. The Spill-Free Funnel eliminates trapped air pockets which usually cause errat...

The Lisle 65600 Broken Spark Plug Remover for Ford Triton 3 Valve Engines removes broken spark plugs from 2004 to 2008 Triton 3 valve per cylinder engines. The set includes a unique porcelain pusher tool and a tapered left...

The special socket design applies the impact force to the center of the frozen bolt through the nose on the pneumatic driver.

Low profile, heat-treated sockets center the pneumatic driver on the frozen bolt. The hex shap...

Five piece kit for removing and installing many alternator decoupler pulleys on the most popular vehicles in North America. Includes two Pulley Sockets and three Shaft Bits. The kit works on both OAD (Overrunning Alternato...

Can be used to install many sizes of seals. The arms of the spider keep the seal centered on the driver during installation. The long handle provides extra reach for pinion seals.

Combination stretch belt removal and installation tool. Unique magnetic faces hold the toll inplace on the pulley. Helps prevent damage to the belt and pulley.

Removes and installs the bearing lock nut on the rear axle of some Chevrolet and GMC vehicles with 9-3/4" DANA 60, 10-1/2" DANA 70 and 10-1/2" GM axles. Line up six pins on tool with slots on the lock nut. Use with 3/4" dr...

This tool works on OEM electrical connectors used on trucks and equipment such as Caterpillar, Kenworth, Peterbilt, Freightliner, Mack and more. Also used on some Harley Davidson connectors.

Set of three terminal tools and handle for removing wires from terminals without damage. Terminal tools work on conventional terminals as well as Pack-Con and Weather-Pack terminals found on many GM vehicles. New blue term...

Quickly and easily releases tension on large and small single spring brakes on GM vehicles.

The Lisle 60660 Deluxe Relay Test Kit includes eight jumpers to fit most popular relays. Also includes test leads and relay puller pliers. This kit makes testing electrical relays quick and easy.

For more information on th...

The Lisle 17350 Pipe Stretcher Kit works on all pipe, even stainless steel. The tool can be used on the vehicle with an impact wrench to quickly stretch pipes. Collet sets expand pipes from 1-5/8" to 4-1/4". The Lisle Pipe...

The Lisle 46800 Master Inner Tie Rod Kit combines our long socket and nine crows feet in a handy molded plastic storage case. The crows foot engages the wrench flats on the inner tie rod and the socke slips over the tie ro...

The Lisle 63000 Fuel Tank Lock Ring Tool is a stout tool to remove and install plastic fuel tank lock rings from 4" to 7-1/4" without damage. Channel design on the body allows the legs to adjust to fit a wide range of appl...

The Lisle 60200 Heavy Duty Strap Filter Wrench has a heat treated alloy steel yoke and a strong yet flexible web strap. The 27" long strap can be used to remove or install filters and other objects up to 6-1/2" in diameter...

The Lisle 39660 Transmission Oil Cooler Line Scissors 3/8" x 1/2" have a stepped design with two sizes to disconnect transmission oil cooler lines on Ford and Cadillac vehicles. This tool fuctions similarly to the Lisle 39...

The Lisle 39160 Fuel Line Retaining Clip Tool Set has a compact design that fits into tight spaces. Two sizes, 3/8" and 5/16", are designed to release the nylon retaining clip used on the fuel lines of newer GM and Chrysle...

The Lisle 29100 Quick Quad Pad Spreader simultaneously compresses all pistons on four piston brake calipers. Can be used while the four piston caliper is still attached to the vehicle hub. Also works on single, double and ...