Leprkan83's channel
Loading...
-
1 month ago
C-Vaughn's SRT-4 walk around before dyno
This video was uploaded from an Android phone.
Leprkan83
favorited
-
1 month ago
C-Vaughn's dyno with only 17lbs 521WHP 380 torque
This video was uploaded from an Android phone.
Leprkan83
favorited
-
1 month ago
-
-
-
2 months ago
Leprkan83
favorited
-
-
2 months ago
s256 dyno run part 3
the journey 2 400....damn batteries died on the camera. last run on pump was 405hp
Leprkan83
commented:
i take it its a stock motor in this vid and what your boost at when u peaked 400hp?
-
2 months ago
AGP S256 Dyno Video *FINAL*
Finally A Great Dyno Video of the New AGP S256 Turbo In Action on my 2004 Dodge SRT4!
Leprkan83
favorited
-
2 months ago
srt 4 built bottom end start up
Srt built bottom end startup other vid has descriptions
Leprkan83
uploaded
-
2 months ago
SRT 4 Built bottom end and rev
bored .20 over je pistons, eagle rods, balanced crank, bc and shafts removed, 5 layer head gasket,apr headstuds, dcr oil modifer, big filter kit, p...
Leprkan83
uploaded
-
5 months ago
2005 Ford Explorer True Dual Exhaust
2-40 series flowmasters
k&n Cold Air Intake
Leprkan83
favorited
-
7 months ago
Dodge SRT-4 Neon 11.1 at 127.8 GT3076R NED ATP Turbo Kit N2MB Wotbox 2Step
Dodge Neon SRT-4 GT3076R 11.19 at 127.8 NED ATP Turbo Kit N2MB Wotbox 2Step Masssrt Best To Date And Was Booted First Full Pass
Add Your Best Video...
Leprkan83
commented:
im using a cell so i cant see all comments but do u have hp and tq numbers on 27psi...i just did a full build and im going with 76r and im hoping to hit the 500whp range on 28-30psi with meth....thx
-
8 months ago
SRT-4 Dyno Run (25psi Big Turbo)
400HP SRT4 running a 380hp and 360+ tq Dyno run.
Leprkan83
commented:
@yz250rida74 i agree with you and i think its water not coolant...but if you notice at the end of the vid its all over the fender too
-
10 months ago
JMS Racing presents: Popcorn SRT-4 Dyno Trip
JJ&B Built Popcorn Machine
AEM ems tuned by JMS Racing
Details in video.
Leprkan83
commented:
so u got 567whp 490 wtq with 93 oct/watermeth on 28psi with a 37R?
-
10 months ago
My SRT-4 Dyno pulls
My SRT-4 pullin 394.2 whp and 351.9 wtq that's the most she has made so far ..... Just running on 91 oct pump gas ATP .57 trim kit , RC 750's , AE...
Leprkan83
favorited
-
10 months ago
Cummins turbo diesel Ram vs Mustang 5.0 in Dragg City!
Cummins Turbo Diesel vs Mustang 5.0 Convertible at a private test facility in Dragg City!
The mustang missed second gear unfortunately for him, bu...
Leprkan83
commented:
@lancerwrestler first off facts are wrong...95 is the last for the stang 5.0....the did that different body style in 94 and then 95 had a combo of the 5.0 and 4.6 then kept 4.6 now till present and i didnt read on it but heard they bringing 5.0 back..im not even a ford person and i know this
-
11 months ago
Ultimate Racing Dodge SRT-4 GT35R Turbo Kit Dyno
A video of our SRT-4 GT35R bolt-on turbo kit. 94 octane, 20psi boost. 440whp, 413ft.lbs. Dyno chart available on our website. www.ultimate-raci...
Leprkan83
favorited
-
11 months ago
HOW TO: srt 4 clutch install
just wanted to get a video out for this, i know its kinda shitty but its better then nothing, hit me up with any questions yall have
Leprkan83
favorited
-
11 months ago
Leprkan83
commented:
if you still have your old flywheel /flexplate i was wondering if u could post the numbers on it or part number....looking for some help on this
-
-
11 months ago
Srt-4 stage 2 cams cold start
This video was uploaded from an Android phone.
Leprkan83
commented:
wat cams and where are they set at?
-
11 months ago
Leprkan83
favorited
-
-
1 year ago
-
1 year ago
2001 Audi A4 1.8T Straight Piped Exhaust
Custom Straight Pipe on 2001 Audi A4 1.8T quattro
Leprkan83
favorited
-
1 year ago
500+ whp SRT-4 Built By: DCR
27 psi
498whp add 3% of nitro= 514whp @ SAME boost level
Build:
DCR pistons
DCR eagle rods
Complete DCR oil system
DCR 5 layer head gasket
DCR top...
Leprkan83
favorited
-
1 year ago
Srt-4 Idle
crane 12s idle, don't mind the smoke, since I dont have a catch can I burn the oil collecting at the intercooler piping area.
Leprkan83
commented:
Is the exhaust and cams all you have done? what are the cams set at 0' 0'?
-
1 year ago
How to Activate Microsoft Office Standard 2007 with key
Please Read the Description for more information and the FAQ section before telling me about your problem as there may be a solution below.
In cas...
Leprkan83
favorited
-
1 year ago
How to get microsoft word 2007 free!! 100% TRUE
watch my lastest video:
http://www.youtube.com/watc...
ok sup me again here is the thing u needed
C:\Program Files\Common Files\Mic...
Leprkan83
favorited
-
1 year ago
Pathfinder 6.5in Lift
Got around to installing my 4.5in lift ontop of my current 2in lift last weekend and just got it driveable. Rear lift will be done as soon as I ge...
Leprkan83
favorited
-
1 year ago
My Lifted Nissan Pathfinder
Finished my 6.5in lift on my truck, a short video followed by pics of the lift process and also just some random pics. Stay tuned for more videos!
Leprkan83
favorited
-
1 year ago
Glynn's First Gen srt-4 Swap with DBB turbo and stage 3 cams.
Glynn's First Gen srt-4 Swap with DBB turbo and stage 3 cams.
Leprkan83
favorited
-
1 year ago
BallHyped.com Big Ben's Broken Nose: Steelers Ben Roethlisberger has bloody nose against Ravens
BallHyped.com video on Big Ben's Broken Nose. (If you like this video, subscribe to our YouTube Channel at http://www.youtube.com/ball...) Pittsb...
Leprkan83
commented:
@Dawg1919 cant be quilty of something if not convicted....everyone is out there to get ppl's money who seem to be famous of some sort =FAIL
-
1 year ago
Family Guy Voice Actors
DOWNLOAD IT http://slickcheatz.googlepa...
Seth MacFarlane, Mila Kunis, Alex Borstein, and Mike Henry during there recoding session.
Leprkan83
favorited
-
1 year ago
(Almost) Elmo's voice actor doing standup!
Brian O' Shea pretends to be Kevin Clash as Elmo then goes to commercials towards the end.
He might not really be Kevin Clash, but it's pretty funn...
Leprkan83
favorited
-
1 year ago
-
1 year ago
DJGendemVs 350Z with flow master exhaust
My 350Z with Flowmaster Muffler, JIC Magic Y-pipe, and Berk Tech HFC
Leprkan83
favorited
-
1 year ago
2004 350Z Flowmaster 80 series Exhaust
2004 350Z with a Flowmaster 80 series crossflow muffler, retained the stock resonator and tips...
Leprkan83
favorited
-
1 year ago
350z Flowmaster
2006 350z. Replaced stock Muffler with flowmaster. Flowmaster is originally for the camaro but the 1 inlet and 2 outlet design makes it an ideal re...
Leprkan83
favorited
-
-
1 year ago
Omer Bhatti: Michael Jacksons secret child? (Joe Jackson has now confirmed that he is)
just some photos of omer make up your own minds :)
Leprkan83
favorited
-
1 year ago
Omer Bhatti O-BEE Audition for John M. Chu
http://facebook.com/obeegalaxy
This is my audition video for John M. Chu. It is a self-made dance routine, showing som...
Leprkan83
favorited
-
1 year ago
Joe Jackson Confirms Omer Bhatti is Micheal Jackson's Son
Joe Jackson Confirms Omer Bhatti is Micheal Jackson's Son
Joe Jackson says Omer Bhatti is Michael Jackson's son and dances just like a Jackson.
...
Leprkan83
favorited
-
1 year ago
"How To" Port polish an intake manifold
In this video I show you how to port polish an intake manifold. Remember to wear your safety gear and take your time. The intake itself took roughl...
Leprkan83
favorited
-
1 year ago
Gaslock, Indy-cator Gear shift Knob with lcd, Pommeau, Pomo, manete
Gaslock Gear shift Knob with lcd.
DThe INDY-CATOR works with all manual gearboxes with up to six speeds, irrespective of the make of car (except fo...
Leprkan83
favorited
-
-
-
About Leprkan83's channel
well even with a built or stock motor man, you did great and your tuner did very well too...those numbers are nice and what im looking for in a daily driver...i have a 4 setting boost controller which will help manage pwr street/track but im honest looking for 480-500whp has been my goal and im l...