Uploaded videos
1-10 of 24-
Casita Calmark Cover Installation
KJRitch
272 views
Using homemade PVC poles makes the installation of the Calmark cover on a 17' Casita Sprit Deluxe much easier than using ladders.
-
Casita Trailer Tour
KJRitch
3,973 views
A short tour of our 2009 Casita 17' Spirit Deluxe at our campsite at Quail Run Campground, Isle de Bois Park of Lake Ray Roberts State Park near Denton, TX. this was our sh...
-
Last Flights of the FlyFly Hawk
KJRitch
170 views
The first and last flight of my FlyFly Hawk. A failure in the horizontal stabs brings the mode down during it's second flight.
-
FlyFly Hawk Retract Test
KJRitch
233 views
Trailing link main gear are finished. The wheel wells are finished and painted. Setting up the SpringAir 602 retracts. Wheel collars are on each retract line and are adjust...
-
FlyFly Hawk Trailing Landing Gear
KJRitch
199 views
I purchased a K&S Coil and Wire bender tool and 5/32" wire and made a couple of struts. I had to cut the wheel wells to conform to the new landing gear shape
-
FlyFly Hawk Light Nose
KJRitch
147 views
With the straight struts there doesn't seem to be much weight on the nose despite the install batteries and the correct CG.
-
FlyFly Hawk Light Nose Fix
KJRitch
96 views
I'm testing the concept of a trailing link main gear design.
-
Apex Second Flight
KJRitch
126 views
100mm scratch built EDF sport jet built and flown by Lee Liddle, Lewisville, Texas at the North Dallas Radio Control Club field on January 29, 2011.
The model is equipped w...
-
Apex Scratch Built Sport Jet Maiden Flight
KJRitch
50 views
100mm scratch built EDF sport jet built and flown by Lee Liddle, Lewisville, Texas at the North Dallas Radio Control Club field on January 29, 2011.
The model is equipped w...
-
FlyFly Hawk Ready to Prime
KJRitch
529 views
FlyFly Hawk glassed in 1/2oz fiberglass with one coat and Zpoxy Finishing resin and one coat of water based polyurethane. Panel lines are filled in with light weigh spackle...
Advertisement










Play all(24)