Uploaded videos
1-10 of 25-
honda sir autoX
JPGaZZ
11 views
Uploaded using PS3(TM)
-
Phase3 F-16 w/ Hobbyking 70mm 3-blade high speed EDF + 4900KV Brushless
JPGaZZ
967 views
A Phase 3 F-16 rebuild after big crash. Upgraded to a 70mm high speed 3-blade EDF from hobbyking.com, and a 4900kv motor. Custom thrust tube made from a plastic binder sh...
-
1987 YSR50 with Derbi GPR engine
JPGaZZ
658 views
Just a little video to show the electric start and a run through the gears a couple times. Camera is taped to my mirror.
Gearing is 12/47 i believe.
-
Phase 3 EDF 16-1.wmv
JPGaZZ
464 views
3s 3600mah 35c , turnigy 3900kv 2835 inrunner with a haiye 7blade 64mm EDF from hobbyking! This is from my second flight!
The Phase 3 EF-16 is from hobbypeople.net. I am...
-
Home Made Coro Airboat 4s power n rudder test.wmv
JPGaZZ
106 views
Testing my motor mount after it fell apart last time. New batteries, Zippy 2s 5000maH 40C in series for 4S. Also a 14x7 APCe type prop. LOTS of power! haven't used full ...
-
Homemade coro RC airboat EP test
JPGaZZ
275 views
Testing the motor mount I made before making a rudder. seems to have enough power, but mount not strong enough for 6s power!!!
-
Hangar 9 SuperStick 40 value series BRUSHLESS EP 6s 11x5 MA prop
JPGaZZ
365 views
Hangar 9 SuperStick 40 value series BRUSHLESS EP 6s 11x5 MA prop.
2- 3s 3000mAh lipo in series, 5055 830kv brushless, 100A esc, Excellent flyer!! I made my battery hatc...
-
RC F 18 7 blade test flight
JPGaZZ
483 views
Power not increased to my expectations. Flight OK but landing not OK!!!!
64mm Haoye 7 blade fans, 3900kv motor (not enough for 3S)
-
RC F 18 7blade test
JPGaZZ
363 views
Test of upgraded fans. 7 blade Haoye with Turnigy 3900kv motor on 3s2p 4400mah.
Hopefully faster then stock.
FMS F-18 hornet twin EDF
-
Hangar 9 Superstick 40 EP brushless 11x5 Onboard 3
JPGaZZ
324 views
3rd onboard flight. loss of signal 1:30 into vid. lowered audio track because of all wind!
Advertisement










Play all(25)