Intanius's channel

@superdeadite

I wouldn't run it with the cover blocking the fans.

also i would find a heatsink to put directly on the cpu

@RancidScorpion

Lube the bearing

@TeaamAU

Could you reattach the ihs with a low temp solder (95C-110C)

@huntergdavis

I have 3 of these (2 that i successfully flashed another that i bricked i only paid $10 a piece so i don't really care plus i got a spare battery) any ways the two that work the microsd cards seem to over heat i was wondering if a sunon B0503AFB2-8(available on ebay) would be able t...

@TriggaTap

What are you talking about.

@HowtoCube

What about graphite powder

@flexwalker100

@crossmethod23

I'm 16 and i went into walmart and bought some they didn't card me or ask my age at all.

MPJA FTW

@Intanius

Use a question mark when you ask a question.

@johnhlex

0:04 to 0:18

thats what she said

Does the intro sound familiar

@WestCoastMods

Couldn't using really high grits net worse performance than stopping at a low grit because The high grits will leave smaller scratches in the metal than any tim can fill so when you apply tim it stays in a thin layer instead of spreading into microscopic scratches and thus acts as ...

Now all we need is a yottaminx.

@MinecraftedForMe

I hope that comment is a joke.

@juggolo

CPU prices going up are the least of worries for computer builders right now.

Hard drives are the major problem there are will continue to be massive shortages over the next quarter resulting in inflation because of flooding in Thailand.

@1:35

To clean it

@tlxxxsracer

I don't mean to be a dick.

but it's pronounce ka zay

it means wind in japanese

In South Korea they believe in fan death.

In North Korea they don't believe in fans.

@unchearted

I think its pronounced jawhn chee

@Fobhero

if your going to argue against something at least do it intelligibly.

@BramSLi

actually its a 750 l/hr pump

@juggolo

And the guy never said the kit was high end, he said it was for high end to midrange computers and by that he probably meant A computer with 1 high end gpu and a high end cpu running a mild overclock not an ultimate enthusiast machine .

@1troyman1

If you saw the first comment i made you probably got confused because i was trying to say he forgot to mention deltas in the video they are good (actually great).

And i was saying that ultra kazes are bad but i blended the sentences together and it looks confusing.

@TheNewbpowner123

at 5.2ghz

No wonders the vrms blow up on these cards the contact with the stock heatsink has to be terrible with those chunks of dried TIM on them.

@juggolo

I think you meant AquaComputer

Aquatuning is a retailer

@TimeToLiveCustoms

isn't best to use a seperate reservoir and pump.

Place the reservoir at the top of the loop and pump at the bottom

@TheNewbpowner123

lga2011 use two levers and land grid array so i you don't move both levers to the same position at the same time you could bend a pin on the motherboard

@zip1385

can you mod a ddc-1(10w or is it 12w) into an 18w pump by changing the pcb