IEraiderfan's channel

Roughing out the contours on the back. Please see the other vids in this series for details...

In this CNC ECourse Video we go over the first step in the CNC Process. The first step is CNC Design. During CNC Design you are thinking of thing...

Here is the first video in the Learn CNC Basics E-Course from www.CNCInformation.com.

This video outline what the e-course is and what it covers. ...

Eric goes over some ideas for finding & carving artwork using the carbon paper method. He also addresses issues with using panel boards. You can se...

We were tired of having to walk across the shop to retrieve extrusions so we built a rack to fix it.

SOME WORK THAT I DO

a demonstration at routing wood signs, first time making a video hard to carve and hold camera

Eric shows a few larger signs, and he shares some ideas of material you may be able to use to make larger signs.

You can see us & "like us" now ...

This is part 1 of a 2 part series. Dave cuts several shaped boards with the router using template guides. You'll see how to use patterns to make sh...

This is part 1 of my build log of the Fine Line Automation FLA-100 CNC router.

We went to one piece flow recently and this video details the time savings we achieved by going to one piece flow.

Part 3 of a 3 part series on router bits. On this video Dave goes over how we cut our shapes. He also goes into detail on template guides and what ...

XZero CNC Raptor

Before cutting a new program I run it well above the stock to check for problems.

This is part 2 of my build log of the Fine Line Automation FLA-100 CNC router.

Look, the machine cuts! Metric shitloads of cuts! Grass growing, etc.

It's been a while, but I finally got my upgraded CNC built!

I kept the dimensions from my previous Solsylva.com router. Howevevr, I made some mod...

Using my home made CNC router to mill the logo for a friend. This is the rough pass. 1/4" aluminum, 1/8" spiral o-flute bit, .063" depth per pass...

I had to try one more time with the 4-flute bit. This time, I upped the feedrate to 100IPM, still taking .005" off.

This gave promising results, ...

For my next experiment, I used a 2-flute endmill, run at 50IPM, keeping the DOC at .005"

I have to say this came out way better than the first fin...

This is the third video in a small series I am making to show how easy CNC cutting is. This video shows the setup and actual cutting of the part ba...

This is the first second video in a small series I am making to show how easy CNC cutting is. This video will give you the basic idea and premise b...

This is the first introductory video in a small series I am making to show how easy CNC cutting is. This video shows you around the machine and a l...

2010 ROAR Electric Off-Road Nationals in Joliet, IL

For full coverage of this event, visit http://www.rccaraction.com/...

First cuts with my homebuilt CNC Router

Part 1 in a 3 part series. Dave goes over all of the router bit that we recommend. How we use them and the suggested depths for each. On this one D...

Part 2 in a 3 part series. Dave goes over all of the router bits that we recommend. How we use them and the suggested depths for each. On this one ...