Thanks for all your tutorials. We've learned a lot about using this board from you! I hope you get some credits from behringer :-)
I tried so send FX to a mix bus which worked fine for a Standard Output. Then our singer bought a P16 and wanted to have some FX on his voice channel again. So I made an equal setting like the monitor output on a new mix bus. Then I sent this mixbus to the P16. But no effects were there. Could you please explain how to do this. tnx a lot in advance
Thanks for your videos. They're great! Recently we discussed the "right" way to set up gain. There are two theories. One is to pull the faders down. And bring all gains to a certain level below 0dB (with help of the LED Meters). The other way is to put all channel and master faders on 0dB and then put the gain to a level where the individual instrument volume seems fine for FOH Mix. What's your opinion on this? Thanks and br Urs
Thanks for your great videos. However one thing seems still unclear for me with this delay. I miss kind of decay for the effect. With this I mean the number of times the sound repeats. "Time" sets the time between each repetition. I expected Feedback L+R to reduce the number of repetitins...but even when I pull it down to 1 or 2% it still repeats around 10 times. All "mixing" options just reduced volume, but not the number of delay repetitions. Any hint about this? Thanks a lot, br Urs
my experience was the opposite. The soundguy loved to have one AMP less which would disturb his PA sound. I play with a FRFR Setup as my Monitor and send the Signal right to FOH.
So wie es ausschaut sprichst du deutsch.
Wenn ich dich richtig verstehe ist dieses i-form und x-form eher für fast-concept-modelling einzusetzen. Heisst das, dass du für Produktivdaten das ganze mit Parametrisierten Skizzen und Flächen-Freeform Modelling neu modellierst?
Oder hast du Erfahrungswerte um direkt mit der x-form Modelliermethode in Produktion zu gehen?
great instruction video again.
what are matrix mixes for?
thanks and br
Great review again. Thanks for that.
Is it possible to send effects to the p16?
How can I control individual p16's from the desk?
thanks an regards
thanks for your tutorials. great stuff. maybe the video quality could be a bit better (resolution and anti shake). So your work would be also visual on a good standard.
How about presets for channels. Are there any good presets shipped? Especially for beginners it would be nice to have some PRO-Presets where its possible to learn from. And of course which need only to be tweaked to suit the location.
great tutorial videos. Thank you.
however the cam shakes a bit...;-)
could you explan also the difference between monitor sends and effect sends? They do share the same 16 buses, don't they?
thanks for this review.
Tell us about the personal monitoring system and the stagebox. Is it possible to loop several personal monitor mixers without this kind of switch box? is there a personal monitoring mixer port in the stagebox?
amazing mixer concept...but unfortunately much too little mic preamps and aux outs
Please show us the ipad functionality too. Is it possible to use the ipad for personal monitor mixint too?