DJhenderlong's Channel

2 subscribers

431 video views

0:45

2 weeks ago

1969 F100 on the dragstrip

In 1992, the local Ford club rented Quakercity Raceway and this is my first pass of the day. Cut a perfect light(look at scoreboard) and ran 13.40...

59Mack • 24,448 views

DJhenderlong commented:

is your axle bellow your leaf springs or above (through) them? i'm wondering if i could just run the axle above the springs and add traction bars...

i could even run ladder bars. but im not sure the best place to connect them to the cassis.. plus id be more work.

idk your advice helps
0:50

2 weeks ago

Ford F100 vs. Chevy Corvette

My brother's truck is finally up and going after a year of work. It used to have a near stock 351 Windsor in it. Now it has a Windsor block with Cl...

66cometman • 23,657 views

DJhenderlong commented:

is your axle bellow your leaf springs or above (through) them? i'm wondering if i could just run the axle above the springs and add traction bars... idk your advice helps
- 4 weeks ago
  
  DJhenderlong liked
0:16

3 weeks ago

af ratio

e32zamri • 3,643 views

DJhenderlong commented:

what resistors are you using?
2:44

4 weeks ago

427 Clevor first start-up

My brother finally got his truck going after a little over a year of work. There's much time and money invested.

66cometman • 4,146 views

DJhenderlong commented:

i'm confused on what you did to the front suspension?
3:48

4 weeks ago

1979 ford f100

79masters • 7,924 views

DJhenderlong commented:

1. take the fucking exhaust off

2. Take out the gay ass radio

3. Get rid of the amp/subs

4. Ditch the fucking air filter, and put on a open elm.

5. Clean up the engine bay cuz it looks like hell.
4:59

1 month ago

Christopher Schneider Round 3 at Milan Dragway High School Nationals in the College Bracket

draggster3633 • 206 views

DJhenderlong commented:

hahahaha thats fricken awsome!!!!!!!!!!! how much are you spraying?

hopfuly i'l be there in a year or so.
2:23

1 month ago

THE CUTEST WAY TO ASK A GIRL OUT TO PROM !

If you want to ask a girl out to prom and she works at a super market...this is the way to do it! Also, stop calling me fat.Thanks.http://www.youtu...

CARABURKEE • 1,187,769 views

DJhenderlong commented:

@Owbalv hahahahahahahhahahahahaha
0:33

1 month ago

Red Sled 2nd 8sec Pass

Kevin Van Natten runs his 2nd ever pass in the 8's in the 2nd round of eliminations of the 2010 SportCompact Fall Nationals in Englishtown NJ.

N2M...

vade46 • 5,239 views

DJhenderlong commented:

@turbopioneer and at the end of the day it is still a neon... why not put the same amount of effort into a real car and run 6's.
0:13

1 month ago

800HP supra flames

2 step

360mmspider • 698,689 views

DJhenderlong commented:

@AK47PERFORMANCE this guy
2:00

1 month ago

MY 1972 FORD F100

A small story behind my 1972 Ford truck. Bought it with 5,000 miles on the rebuilt original motor and a C6 with shift kit. The original Arizona t...

yooperd • 34,077 views

DJhenderlong favorited
0:15

2 months ago

Turbo intake fan

I my friend bought this and thought it would actually help his motor perform better. and he sent me this shitty video!!! i hope you enjoy it;) This...

cameron1423 • 647,919 views

DJhenderlong commented:

Do me a favor and run a bbf instead.
7:25

2 months ago

Conjoined Twins: Twin Girls, A Medical Wonder

Twin girls joined at the head who share the same brain and so much more.

Watch a follow up story - 8 years later - on a similar set of twins: http...

ABCNews • 3,966,158 views

DJhenderlong commented:

@avi10131 good grammar!
0:54

2 months ago

Let the Bass Cannon kick it

Bass Cannon Bass Cannon Bass Cannon Bass Cannon

★ Follow Going Quantum:

http://facebook.com/goingqu...

http://twitter.com/goingqua...

http://yo...

goingquantum • 1,187,710 views

DJhenderlong favorited
- 2 months ago
  
  DJhenderlong liked
3:32

2 months ago

DIY homebuilt 3 axis CNC router, CUTTING ALUMINUM

Plans for this machine are available on ebay.

http://shop.ebay.com/momus_...

Unique fully enclosed benchtop CNC rout...

momusCNCdesign • 45,464 views

DJhenderlong commented:

Nice man! fyi at the shop we have to program to cut the stock when cutting circles, so that the stock doesnt break the tool.

what spindle and steppers and controler and ball screws are you running?
- 2 months ago
  
  DJhenderlong liked
6:17

2 months ago

Home-Made CNC router, engraving aluminum Charvel logo

A test cut on my newly made CNC router. Using a 60 degree V bit, spindle at about 15,000RPM, feed rate about 60IPM. Shallow passes, this is actua...

AtienzaLouie • 1,297 views

DJhenderlong commented:

@jimmyjones001 Good luck. its hard to achieve that at a professional machine shop.
0:38

2 months ago

4th axis

adam623 • 17,337 views

DJhenderlong commented:

Dang man! thats pretty good! were did you pick up your chuck? What size steppers are you using
0:41

2 months ago

Half built JGRO CNC machine

Half built JGRO CNC machine, next step is to mount the steppers and control.

fragge • 2,191 views

DJhenderlong commented:

@fragge Sorry about all the questions. What steppers, and spindle motor

did you go? i'm looking at kits on ebay and having a hard time choosing one. I can't find any with limit switches. Is this something orderd extra?
0:56

2 months ago

Blaine's JGRO CNC machine part 1

A quick look at the first stages of my JGRO CNC Machine. Other parts will follow after.

shareacrop • 477 views

DJhenderlong commented:

Are your adjustment blocks threaded into the pipe? how do they work? is the mdf threaded?
31:40

2 months ago

Chill Out Relax Music - Wonderful Meditation Mantra - Guru Guru Waheguru

http://www.RajKaregaKhalsa.Net

http://www.sikhee.com

Guru Guru Waheguru Guru Raam Daas Guru

Waheguru (Punjabi: ਵਾਹਿਗੁਰੂ ) is the primary Mantra; ...

RajKaregaKhalsanet • 995,329 views

DJhenderlong commented:

@Antikutxo (repeat x 1.872 * 10^10)
0:26

2 months ago

Cone-ing (unicone) unicorn method

The original unicone... Believeeeeeeee

www.theunicone.com. Follow @originalunicone

Deweerd83 • 536,430 views

DJhenderlong favorited
1:35

2 months ago

Video 2 - Dragon Shouts!

Me yelling some Dragon Shouts.

This is my first video using editing software (Windows Movie Maker). Some parts are cut kinda stupidly, but whatev...

JiveForceOne • 49 views

DJhenderlong commented:

what the heck was that last part?
9:53

3 months ago

Spiderman Cartoon- Venom Returns Part 1

Spiderman Cartoon- Venom Returns Part 1

athalia123 • 17,682,920 views

DJhenderlong commented:

wish i could find these in HD
1:29

3 months ago

What happens when DAD goes Passenger in a 550 Hp Mazda RX3 Drag Car

Support Australias Number 1 Rotary Channel.. Join our new website!! Click here its free!!

http://www.rotorg33k.com/in......

rotorg33k • 320,125 views

DJhenderlong favorited
0:53

3 months ago

Dad's first ride in my 530 hp MR2

Notice how he was smiling after he figured out he didn't die due to sudden acceleration...

By the way, my dad was hand holding my iPhone while it ...

SublimeLightPhoto • 250,683 views

DJhenderlong favorited
1:06

3 months ago

Son scares his dad with his 600hp car

...

ryans143 • 571,232 views

DJhenderlong favorited
1:40

3 months ago

1988 Thunderbird Review

A quick discription of a friends 1988 Ford Thunderbird. He is currently painting it and a video of the finished product will be up soon.

NOTE: Thi...

xXPacificoXx • 612 views

DJhenderlong commented:

1 guy is an ass
2:22

3 months ago

You got to see this, Getting yelled at for the diesel truck I drive

Ok, I do not deny I drive a truck that has some what bad MPGs ,my average is 18-22mpg... AND I can go bio diesel too and that is another reason why...

ddcutlass77 • 696,774 views

DJhenderlong commented:

look bitch,

1. you spent 40 thousand on a pruis.

2. it takes more energy to recycle a pruis then a F250 uses in it entire lifetime.

3. Diesel is also alot more effcient than gas.

4. Your batteries in your pruis are charged by burning coal.

5. Your fat. go hug a tree bitch.
0:41

3 months ago

Ford Truck Boss 460 Twin Cam 600 H.P.

Ford Truck Boss 460 Twin Cam 600 H.P.

XxTruckNutxXlolo • 15,999 views

DJhenderlong commented:

they did make an overhead cam version of the 427
8:30

4 months ago

Engine Assembly Part 8 you finally get to hear it run

The moment of truth has arrived sounds pretty decent, carb is running a touch rich though, sorry i didnt video the cam break-in... i will post my b...

wagner59270 • 8,422 views

DJhenderlong commented:

be careful when you zip tie those plug wires. Your actulay spose to set them apart. iv had one wire pick up another wires spark and mess up the timming.
0:22

4 months ago

Ford Mustang Launch (street)

Cruisin' Ocean City, MD Spring 2008

KayJay75 • 504,786 views

DJhenderlong commented:

@badcolt944 1000+ hp shot. maybe. idk would be intresting to see what it runs in the 1/4. I was at the track yesterday and this guys twin turb stang ran 6.75 at 217mph.
1:08

4 months ago

Orange 302 Special - Run vs Dodge Coronet 69 440 R/T

Malbouans 2008.

BillyOctane • 23,430 views

DJhenderlong commented:

@leanlifter okay mr. technical. 302ci is 4.94919l. Ford fudged the numbers alil and called it the 5.0l. They also made the 300cid which is called the 4.9l.
4:37

5 months ago

2004hp Horse Power 4x4 Drag Truck at The Good Times 4x4 Event June 7th 2009

I wanted to talk to them More but it didn't seem Like they didn't wanted to .. Thanks for You all Checking it out and Hope to see you at Our Websit...

TheOutlawVideoSS • 931,282 views

DJhenderlong commented:

@Wazoo117 hahahahahahahhahahaha thats halarious!
0:15

5 months ago

Digital Tachometer

This is a home made digital tachometer that i build for my car. Coz my car doesn't hv any RPM Meter.

pasanlaksiri • 14,403 views

DJhenderlong commented:

Hey man is there any chance you can help me out by sending me this schematic? and parts list?
0:08

5 months ago

Shawns Murder Nova Wheelie

midweststreetcars.com

bigrob3232 • 1,444,860 views

DJhenderlong commented:

I like to see a european car do that. lol
2:42

5 months ago

PARTY in my MOUTH!!!

FACEBOOK ME :) http://www.facebook.com/sha...

Brees Channel http://www.youtube.com/bree...

SHIRTS/MERCH STORE - http://store.bandmerch....

shane • 508,626 views

DJhenderlong commented:

@TheUnforgotten1s or i will bite the bullet and make out with her.
2:39

6 months ago

Super Mario DUBSTEP REMIX *HEAVY DROP*

Heavy dubstep, Super Mario style! Heavy Drop!!

Shoutout to Jo Ivo!

SNIPERmicSNIPER • 6,777,926 views

DJhenderlong commented:

@les2kamikazes so is that a question or a comment? dumbass

About DJhenderlong's channel

Created by

DJhenderlong

Latest Activity

Feb 14, 2012

Date Joined

Sep 11, 2008

Age

Country

United States

less