Death to the jew

It's a fun game to search out the materials that can be put together to make something go "BOOM". An interesting point to remember that it is much easier to make a big explosion than a small one. It is very difficult for a home experimenter to make a fire-cracker, but a bomb capable of blowing the walls out of a building is easy. You can find what you need in grocery stores, hardware stores, and farm supplies. Another, but harder place, to get chemicals is a chemical supply house. These places can be dangerous to your explosive career because some supply houses were told to report people who buy chemicals in a certain combination. For example; If a person were to buy tolulene, nitric acid, and sulfuric acid would be reported. The reason: those chemicals are the ones used in making Tri-nitro-tolulene (TNT).

BELOW ARE FIVE DIFFERENT WAYS TO MAKE THE COMMON EXPLOSIVE, DYNAMITE.

1) Nitro........................ 12%
Guncotten.................... .5%
Amonium nitrate.............. 87.5%

2) Nitro........................ 88%
Potassium nitrate............ 5%
Tetryl....................... 7%

3) Nitro........................ 24%
Guncotten.................... 1%
Amonium nitrate.............. 75%

4) Nitro........................ 75%
Guncotten.................... 5%
Potassium nitrate............ 15%
Wood meal.................... 5%

5) Nitro........................ 80%
Ethalyne glycol dinitrate.... 20%

After people make this stuff, they sometimes pack it in a cardboard tube and expoxy each end. They have to be careful for it might be a little unstable because of the nitroglycerine (nitro). Before it is totally dry they stick a good fuse in one of the ends. They then light, throw, and run as if their life depended on it! Which in a way it would.

MAKING SULFURIC ACID
--------------------

No, your not really MAKING sulfuric acid, you are just making it more concentrated. All you need to do is to take a old car battery and dump all of the acid into a GLASS bowl, one that can be set on a stove. Not all glass bowls can be set on stove, make sure you know 100%it's safe. Do not use metal for unwanted occurances could come about. Just take the old acid and boil it until you see white fumes come out. When you do immediately turn off the heat and let it cool. One thing, DO NOT use a gas stove. Use an electric hot plate & make it outside because the fumes are very poisonous.

NITROGLYCERIN
-------------

Nitroglycerin is a very high explosive. It is used all around the world to do many different types of jobs. To make nitro here is what you have to do:

By weight, one part of glycerin is nitrated with 6 parts of mixed acid. The mixed acid is composed of 40% nitric and 60% sulfuric acid. The sulfuric acid is slowly added to the nitric acid with constant stirring. Never mix them the other way round for they will splatter. Each part of glycerin will yield 2.3 parts of nitroglycerin. The temperature when adding the glycerin to the acids should never go above 25 degrees centigrade. If it does or if red fumes appear, the whole mess should be dumped into cold water fast. Do not take this as an encouragement to make nitroglycerin. It is a dangerous procedure to mix all these types of acids together and can easily be lost control of.


SODIUM CHLORATE IMPACT MIXTURE
--------------

50% red phosphorus
50% sodium chlorate

Unlike potassium chlorate, sodium chlorate won't explode spontaneously when mixed with phosphorus. It has to be hit to be detonated.

T.N.T (Trinitrotoulene)
--------------------------

Mix 170 parts toulene with 100 parts acid. The acid being composed of: 2 parts 70% nitric acid and 3 parts 100% sulfuric acid. Mix below 30 degrees. Set this for 30 minutes and let seperate. Take the mononitro- toluene and mix with 100 parts of it with 215 parts of acid. This acid being composed of: 1 part pure nitric acid and 2 parts pure sulfuric acid. Keep the temperature at 60 -70 degrees while they are slowly mixed. Raise temperature to 90 - 100 degrees and stir for 30 minutes.

The dinitrotoulene is seperated and mixed with 100 parts of this with 225 parts of 20% oleum, which is 100% sulfuric acid with 20% extra dissolved sulfur trioxide, and 64 parts nitric acid. Heat at 95 degrees for 60 minutes and then at 120 degrees for 90 minutes. Seperate the trini-trotoluene and slosh it around in hotwater. Purify the powder by soaking it in benzene.

Feel free to post this on your channel.

less