ChrisRadek's channel
Loading...
40
subscribers
102,676
video views
Uploaded videos
1-10 of 11-
Homemade 5 axis machine, running EMC2, in XYZAB configuration
ChrisRadek
14,663 views
I changed my 5-axis toy stepper machine (formerly a maxnc) to AB configuration instead of its usual BC (the table's rotary is vertical instead of horizontal). This was to ...
-
American Robot EMC2 retrofit at MPM, drawing AXIS splash screen logo
ChrisRadek
1,408 views
Using EMC2's generalized serial kinematics, this robot can be run in world mode (cartesian coordinates) and programmed using regular G Code. Work on this part of EMC2 is o...
-
robot homing
ChrisRadek
354 views
-
American Robot at MPM, run by EMC2
ChrisRadek
483 views
We got the robot moving tonight. We have one bad and one missing stepper drive, so motion is limited. This is just random gcode running, and we have not yet written kinem...
-
12" rotary table converted to CNC control
ChrisRadek
559 views
This table is an A axis for my Mori Seiki MV Jr. retrofit running EMC2.
At the beginning of the video is "index-only" homing, a neat feature of EMC2. There is an index pu...
-
Rotary table CNC retrofit
ChrisRadek
797 views
This is a test run of a velocity mode servo and amp retrofitted to my 12" manual rotary table. This will be the A axis for my Mori Seiki MV Jr. mill that runs EMC2.
The b...
-
Boring and measuring a bearing seat with EMC2
ChrisRadek
1,661 views
Here I am making a part that has two bearings pressed in. The first part of the program uses helical milling and then a boring head to make nice round holes about 0.001 in...
-
Follower rest on my Hardinge HNC, run by EMC2
ChrisRadek
638 views
I made this follower rest setup for the HNC to let me part off hundreds of brass discs for a project. The fixture plate is hefty and is tapped all over for future setups. ...
-
EMC2 rigid tapping a fixture plate
ChrisRadek
664 views
These are 1/4-20 holes on a 1" grid. The plate is 3/4 thick. Tapping at 400 RPM with an HSS spiral point tap held solid in a 7mm ER40 collet. The machine is my Mori Seik...
-
Hardinge HNC conversion running EMC2
ChrisRadek
7,077 views
This is the first real job on my HNC conversion. This is a knob for a panel mount encoder, knurled and bored carefully to .1975 for a press fit on the encoder shaft. To f...
Advertisement
About ChrisRadek's channel
more
less
Play all(11)