Bream243's channel

This pre-World War II (WWII) film profiles the Submarine Training School at New London Connecticut. Features footage of the R4 (R-4) and R11 (R-11...

How to use the Hornady lock n load bench scale.

Here I demostrate the proper setup and use of the Hornady Cam Lock Bullet Puller

Here is a rundown of the Lee Pro Auto-disk powder measure. This is for informational purposes only. I accept no liability for the information sho...

Reloading on a Budget Part 2: Cleaning and Polishing Used Brass

Here is another video in my reloading series featuring the Hornady Cam-Lock Trimmer. If you purchase this trimmer in 2011 you can use the Get Load...

This is a series showing the different tools used for general reloading

My first review of the Hornady M-2 Case Tumbler. Let me know if you have any questions and as always ratings and comments appreciated.

This tutorial shows how to set up your Lee collet neck sizing die.

Part 3 of my basic 4 part series

How to reload your own ammo. More accurate & cost efficient than buying factory ammo, and safe, as long as you can follow directions.

Part 1 of my "How to Reload" series

In this two part video series, you'll see what it takes to load .223 Remington cartridges for your AR-15 or other rifle using the Lee Classic Turre...

I finally bought a powder measure. Now I can retire the Lee dipper and move into the 21st century

If you have extra scale trays laying around, be careful...

Lee powder measure

Second Part......

Demonstrating my Lee Perfect Powder Measure....

Free Forum at http://www.reloaderschoice.com

Close up of Lee classic turret press in operation.

Loading .223 5.56 USGI cases with 55g. Hornady F...

Who says ladies can't handload? :-) My cameralady, "Miss BHC", shows you how easy the Lee Classic Turret Press is. This is her first day with it...

Part 5 of the series. We're stocked, locked, and ready to load! Here you see us actually using the "newly assembled" press to make some .38 Speci...

Part 4 of the series. The press is now assembled and ready to stock with components (powder and primers). We also show you a trick for avoiding t...

Part 3 of the series. We continue through the installation of the Safety Prime, with some tips and tricks for setting it up. Afterwards, we show ...

Part 2 of the series. Here we take a Classic Turret Press as if it were "out of the box" and do a basic "ready to load" setup in .45 Colt. We als...

Adjustment of the index rod on the Turret Press

Four Hole Turret Press Indexing Problem

Lee Classic Turret Press thrust run out end play measurement

A quick look at the Lee Classic Cast Turret Press

I like to reload while playing youtube videos of reloading.... kinda like having your buddy there loadin with you. I like one particular video best...

(Part II of II) In this two part video series, you'll see what it takes to load .223 Remington cartridges for your AR-15 or other rifle using the L...

Here is how you properly set up your dies and powder measure on a dillon 550b reloading press. part 4/4

Here is how you properly set up your dies and powder measure on a dillon 550b reloading press. part 3/4

Here is how you properly set up your dies and powder measure on a dillon 550b reloading press. part 2/4

Here is how you properly set up your dies and powder measure on a dillon 550b reloading press. part 1/4

Reloading Basics Ep 1 ( Part 2 )

I cover some of the basics of reloading.

Rugersix's " The Squib " video Link

http://www.youtube.com/watc......

Reloading Basics Ep1 ( Part 1 )

I cover some of the basics of reloading

How Fast Can You Load 50 Rounds? I got some pm's asking how fast the dillon was.. Here is your answer..

Music by Kevin MacLeod

Going over some Reloading info and highlighting the Dillon RL 550B Progressive Press.