BreakOTron's channel
Loading...
25
subscribers
59,096
video views
Uploaded videos
1-10 of 19-
100_2814.MOV
BreakOTron
705 views
Drilling the holes for the main pin bushings of the HP-24 high-performance racing sailplane.
-
coupon2.02x.013.MOV
BreakOTron
166 views
Tensile test of a fiberglass ribbon coupon on 6 April 2010. The ribbon is 2.02" (51.3mm) wide and 0.013" (0.33mm) thick and consists of a single ply of 8oz fiberglass clot...
-
coupon1.27x.013.MOV
BreakOTron
60 views
Tensile test of a fiberglass ribbon coupon on 6 April 2010. The ribbon is 1.27" (32.3mm) wide and 0.013" (0.33mm) thick and consists of a single ply of 8oz fiberglass clot...
-
Shear strength test of two MD43BS pop rivets
BreakOTron
2,499 views
Shear strength test of two MD43BS monel pop rivets in 1/16" 4130 steel. The pair load to 730 lbs force when one rivets shears. The second rivet shears after re-stressing to...
-
Tensile test of aluminum push-pull tube
BreakOTron
1,137 views
Tensile test of aluminum push-pull tube. The main tube is 5/8" OD 0.035" wall thickness 6061-T6 aluminum tubing. Each of the end fittings is riveted on with two MS20470AD4 ...
-
Push pull tube compression test
BreakOTron
1,024 views
Compression test of an aluminum push-pull tube. The tube measures 14.6" eye-to-eye, and is fitted with Aurora MM-4 rod ends at each end. The main tube is 5/8" OD 0.035" wal...
-
RV-8 first takeoff
BreakOTron
1,763 views
-
VID00085
BreakOTron
63 views
3 June 2009 epoxy coupon test 4 of 4
-
VID00083
BreakOTron
35 views
3 June 2009 epoxy coupon test 3 of 4
-
VID00081
BreakOTron
44 views
3 June 2009 epoxy coupon test 2 of 4
Advertisement
About BreakOTron's channel
more
less
Play all(19)