Bgee134's Channel

1 subscribers

2,632 video views

1:02

1 day ago

"Cubs Win" MLB 12 The Show Full Length Commercial

So real, it's unreal.

http://www.facebook.com/mlb...

MLB 12 The Show - Available March 6th.

Major League Baseball and Minor League Baseball...

PlayStation • 607,563 views

Bgee134 commented:

AHHHH! It's great to live in St. Louis and have the Best team - past and present - in the National League!
2:13

2 weeks ago

Graham Industries GAGE TVR1A Steam Engine 001

A lovely twin cylinder engine, from a kit of machined parts by Robert Graham, Graham Industries.

This is the first time the engine has been run s...

xKmotx • 316 views

Bgee134 commented:

What size are the oil cups you used on the bearings? I'm guessing you had to solder them on. Really like that look, thinking about doing it to my TVR1A.
5:45

4 weeks ago

Marshall MG100HDFX Amp Fan Fix Tutorial

This is the fan I used ordered off the internet:

EVERCOOL CASE FAN Model # - EC5010M12CA

This tutorial will show you how you can fix the fan in y...

MetalK1LLs • 2,462 views

Bgee134 commented:

I had to replace the fan on mine. It actually shut the amp down till it cooled off. A simple fan from radio shack did the job. No problems since!
2:21

1 month ago

Perseus Mill Engine

nmui100 • 341 views

Bgee134 commented:

Hello, I just ordered my first cotswold heritage perseus model engine. Can't wait for it to arrive. however, they told me there was a back order and would be a wait for shipment, but did not specify how long it would be. Did you have a wait for yours to be shipped?
0:51

1 month ago

MVI_3258.AVI

Model Steam Drilling Engine

drillen1 • 53 views

Bgee134 commented:

One of the best looking PM Research engines I have ever seen!
3:47

1 month ago

STEAM ENGINE completed with dynamo and live boiler feed pump

This is my steam engine complete with 12 volt dynamo and an LED lite, boiler with live feed pump, safety valve and whistle and oil seperator. runs ...

boa721 • 16,785 views

Bgee134 commented:

I'm just about finished building this model boiler....what a project! I had the machine work done for me as I don't have the skills and equipment to do it my self. I did however do all other work. I found soldering the flue tubes to be the most tricky work as they are in odd angels to apply so...
1:31

1 month ago

CMS Single cylinder Steam engine

http://dampmaskiner.webs.com

I finally finished this British made double acting engine that was purchased as a kit and assembled.

It is roughly t...

75echo • 178 views

Bgee134 commented:

Looks like the PM Research # 3 model engine.
1:23

1 month ago

Stuart Beam engine and PMR boiler running

nickademuss42 • 457 views

Bgee134 favorited
- 1 month ago
  
  Bgee134 commented:
  
  Aweosme! I'm in the process of building that boiler now. Hopefully one more week or so before completion. Very nice engine also!
1:11

1 month ago

Stuart #9 Steam Engine on 1.5 psi air pressure - very well built

reddrryder • 201 views

Bgee134 commented:

That's like a hot knife through butter!
1:01

1 month ago

AWOLNATION 1/22/12

Pop's Nightclub, St. Louis

toocooltobemitch • 65 views

Bgee134 commented:

I was at this show, who was the second band to open....the one before whitewives?
1:38

2 months ago

Danny Carey vs Mike Portnoy

http://www.youtube.com/watc...

!!!PLEASE READ THIS!!!

THERE IS A NEW DC VS MP VIDEO

PLEASE VIEW THAT ONE INSTEAD

This was my first vid...

ratemydrums • 402,105 views

Bgee134 commented:

Carey!
8:35

2 months ago

DDB21- Tool- The Grudge (unedited drum cover)

This IS the whole song. I just figured I would record it again with this live audio instead of doing it through the studio because I had so many p...

DrummerDBrown21 • 10,421 views

Bgee134 commented:

Sounds like some.....most of your drums are out of tune. Maybe not out of tune, but not in tune with Danny's. Good effort though. I'm just a stickler for detail.
3:09

2 months ago

Van Halen's New Song "She's The Woman" at Cafe Wha?

Van Halen performing their brand new song "She's The Woman" at Cafe Wha? January 5th 2012.

Van Halen News Desk:

http://www.vhnd.com

BUY Official ...

VanHalenStoreDOTcom • 353,768 views

Bgee134 commented:

I love VH, But.......Don't know about this. Wolffie might be a VH, but he is no Mike Anthony. Alex still has no originality......Eddie, KEEP ROCKIN!!!!!!! Oh yeah....David is still just David.
10:00

3 months ago

PMR steam boiler

A description of the construction of a small steam boiler made from a kit of materials supplied and designed by PMR in North America. Brief detail...

dolphindad1 • 327 views

Bgee134 favorited
4:12

3 months ago

Gucci Mane - Freaky Gurl (video)

© 2007 WMG

Freaky Gurl (video)

AsylumRecordsTV • 2,797,851 views

Bgee134 commented:

I see this guy put his money where his mouth is.
6:28

4 months ago

Live steam Stuart Real steam engine and PMR boiler

A video of a Stuart Real steam engine running under live steam from a PMR boiler. The boiler is newly made and the steam engine has featured in my...

dolphindad1 • 303 views

Bgee134 commented:

I'm thinking of building that boiler this winter. Would love to see more videos of it in action. I'd also welcome tips and tricks for the build.
1:10

5 months ago

Stuart Turner 'Victoria' Horizontal Steam Engine and Boiler For Sale

Stuart Turner 'Victoria' Horizontal Steam Engine and Boiler

mariajarvis1 • 556 views

Bgee134 commented:

Has this model been sold yet? If you what is the asking price?
- 5 months ago
  
  Bgee134 favorited
0:40

5 months ago

My steam engine display at Whately Engine Museum 2010

reddrryder • 220 views

Bgee134 commented:

Are these all engines of your own design and making? Very beautiful!
12:17

8 months ago

Vertical Steam Boiler & PM Research 6CI Steam Engine Demo

See more of this project at WWW.RCDON.COM !!! This video demonstrates the operation of a small horizontal steam engine and vertical steam boiler. T...

rcdon • 3,287 views

Bgee134 favorited
1:49

9 months ago

Cotswold Heritage Perseus

My Cotswold Perseus steam plant powering a Blue Thunder generator with impunity.

SwiftFoxSteamCo • 402 views

Bgee134 commented:

I've been thinking about getting this model engine, and the more and more I see videos of it pop up here on you tube, I'm convinced it is a hard working piece of machinery. What other types of loads have you tried putting this engine to work on? I'd like to know how it performs.
3:25

9 months ago

Devastating Joplin, Missouri EF-5 Tornado - May 22, 2011

On May 22, 2011 a highly destructive and deadly tornado tore through the city of Joplin, Missouri. Here is video of the tornado entering the south...

TornadoVideosdotnet • 2,281,377 views

Bgee134 favorited
5:50

9 months ago

First Person video of Joplin MO tornado 5/22/11

The video i took of the F5 tornado while at Fastrip on east 20th street. We huddled in the back of the store until the glass got sucked out , then...

izelsg • 4,344,102 views

Bgee134 favorited
0:39

11 months ago

PM Research 3 Steam Engine

A PM Research 3 Steam Engine running at a slow-to-medium pace.

336 views

Bgee134 uploaded
2:10

11 months ago

Inattentive driver crashes into police car responding to an accident

While blocking a lane shortly after an accident occurred on an icy I-70 in North St. Louis, a cop car was struck by an inattentive motorist. Not ex...

thecheeta • 68,127 views

Bgee134 favorited
1:57

1 year ago

Quincy Troupe and Sgt Gary Wiegert on St. Louis Police Pensions

Alderman Quincy Troupe clearly has designs on the St. Louis Police Pension Fund. Sgt Gary Wiegert responds to Troupe and explains the success of th...

dsm0012 • 969 views

Bgee134 favorited
1:31

1 year ago

Alderman Troupe on Police Pensions

St. Louis Alderman Quincy Troupe (D-1st Ward) shares his opinion of police pensions during the Board of Aldermen meeting on December 4th, 2009.

SLPOAFOP68 • 1,089 views

Bgee134 commented:

This guy is a clown, an embarrassment to the city......along with all the other alderpersons
1:59

1 year ago

Shirtless Wigger Gets Sonned, Play Him Off Keyboard Cat

http://www.keyboardcatnow.b...

Shirtless Wigger Gets Sonned, Play Him Off Keyboard Cat

tbananaz • 29,636 views

Bgee134 favorited
10:46

1 year ago

Tool - Pushit {Live}

Best version ever!! New york 5-20-01

Shitballs78 • 146,215 views

Bgee134 commented:

I'm pleased with the quality of this recording for a live gig!
4:52

1 year ago

PUSCIFER Telling Ghosts

From the Puscifer Entertainment release "Conditions of My Parole." Shot by Tim Cadiente (Barton Perreira) and Meats Meier (3D Art Space)

Edited by ...

pusciferdotcom • 89,427 views

Bgee134 subscribed to pusciferdotcom
3:47

1 year ago

Taylor Steele for SCORE in the Bahamas!!!!

TaylorAmelia • 239,309 views

Bgee134 commented:

I thought she was smoking hot till I heard that voice....she probably hauls the coal.
1:18

1 year ago

PMR-7 vid 1

This is an engine I machined for a pal in Sweden. The unmachined castings come from the P.M. Research company in the U.S.A. They make very good q...

dcw56 • 906 views

Bgee134 commented:

I'm absolutely sure I will enjoy the PMR #3. It should be here within the next day or so. Is there any tips your can give me for smoothness of running and breaking it in? Polishing the crank, crank endplay, running in, main bearing info etc... Oh also, what size oil cups did you decide to go w...
9:36

1 year ago

Sarah Palin 'Blood Libel' Controversy

Cenk Uygur (host of The Young Turks) breaks down Sarah Palin's deflection of criticism after the shooting of Democratic Congresswoman Gabrielle Gif...

TheYoungTurks • 62,661 views

Bgee134 commented:

I wounder who wrote this for her. She definitely did not write this!
6:16

1 year ago

Modified Jensen 95G_xvid.avi

The Jensen 95G runs fine stock but on mine the steam valve (steam regulator) went bad and got to the point it was leaking so much steam it would no...

Jeff46u • 164 views

Bgee134 favorited
- 1 year ago
  
  Bgee134 commented:
  
  I like your modifications. I have a Jensen 75 that I would like to use a PMR # 3BIM engine in place of the stock Jensen. I also have the problem with the steam valve leaking. Did you simply cut the line and solder the globe valve in place? I am always looking for ways to make my engine better...
1:58

1 year ago

Cotswold Heritage Perseus N0.138.MPG

more engines at www.indianarog.com This is an engine from Cotswold Heritage of England. Model called the Perseus. Lovely action on air or steam ...

IndianaRog • 1,017 views

Bgee134 commented:

I've been seriously thinking about getting this model engine. I'm glad you got some close-ups and give a good review. I think I may get the kit so I may get the enjoyment of assembling it myself. I see mooseman has this engine, but the videos are not very good when showing what this engine can...
2:58

1 year ago

STUART 10V STEAM ENGINE RED.wmv

GREAT STUART 10V STEAM ENGINE

steaminon1 • 331 views

Bgee134 commented:

Opening the cylinder drain cocks (Valves on cylinder) will help get it started and reduce the water spray from exhaust. I like to call then cylinder purge valves though....just sounds better.
4:38

1 year ago

Mudvayne Death blooms bass cover

Had heaps of requests for death blooms, finally found a camera and the time to record, been very busy on tour. Hope it's what you were after. =)

F...

7sloth • 159,020 views

Bgee134 commented:

I always liked his style and tone....awesome job!
2:37

1 year ago

IMV Trailer: Fieldy, bassist for KoRn

Fieldy is the Grammy® Award winning bassist for KoRn. His massive dropped-down sound and unrivaled technique has woofers rattling

car windows arou...

BEHINDthePLAYER • 290,932 views

Bgee134 commented:

I really don't think this guys knows how to play. Just beats A and B flats. Lucky for him all Korn's music is in the key of "A". Horrible tone as well....it's all 100% bass and 100% treble, no mids to even it out.
9:19

1 year ago

Tool - Lateralus (Guitar Cover)

Recorded with presonus firepod FP10.All guitars recorded via Di and i used Guitar Rig 4! (thanks to maggotgreece for helping me out!!)

i made some...

malohas • 628 views

Bgee134 commented:

Don't take it personally.....everyone get's it wrong. At 7:25 into video: strum your chord on the second fret. just as the drums come in....trust me you will hear the difference and it will sound on key with the singer's voice.
9:23

1 year ago

Tool Lateralus Guitar Cover

My cover of Tool's awesome Lateralus track. I don't think I've ever done as much footwork and pedal hopping as I had to for this tune. Deceptivel...

oddlittleant • 2,191 views

Bgee134 commented:

Don't take it personally.....everyone get's it wrong. At 7:23 into video: strum your chord on the second fret. just as the drums come in....trust me you will hear the difference and it will sound on key with the singer's voice.

About Bgee134's channel

Created by

Bgee134

Latest Activity

Mar 7, 2012

Date Joined

Jan 10, 2010

Age

Country

United States

less