BaznastyDave's channel
Loading...
-
2 weeks ago
Mustang GT Nitrous Dyno
Had a re-tune and made.......
305/333 WHP/WTQ on motor
427/552 WHP/WTQ on spray, ran out of fuel!!!! (12/29/2011)
440-445 WHP estimated now after t...
BaznastyDave
uploaded
-
2 weeks ago
BaznastyDave
commented:
-
-
3 weeks ago
Mustang Gt 1/8th mile
2004 Mustang GT, TR-3650 5-spd
285WHP N/A (at the time of this video)
CMS Stage II cams, stock long block, stock heads, bolt on's, and Suspension
S...
BaznastyDave
uploaded
-
3 weeks ago
BaznastyDave
commented:
@jpadilla05 31 spline rear, 3.73 gear
-
3 months ago
BaznastyDave
liked
-
-
1 month ago
2004 Mustang with CMS Stage II cams, untuned.
Just installed my cams. Cams are CMS Stage II's with Trick Flow springs, stock heads. Cams are .562 intake and .576 exhaust. Car is untuned when th...
BaznastyDave
commented:
@Standard291 Does not have those on it anymore, and it has a 99-01 Cobra bumper, 03-04 Cobra mirrors, and 03-04 Cobra spoiler on it. Brush up on your Cobra/SVT knowledge
-
1 month ago
306 Mustang with Go-Pro HD
Anderson N-91 cammed stock block 306 In car with a Go-Pro HD. Went an 11.012 @ 122.2 on a 1.45 60' this pass.
BaznastyDave
commented:
What was the 1/8th time??
-
2 months ago
2003 Mustang GT 1/8 mile strip visit
2003 Mustang GT Kenne Bell 2.1 L SC at 11 psi, KB Big Tube Intake, Flowmaster Cat Back, 10.5 inch BFG Drag Radials, 3.73's, 100 octane KB tune.
BaznastyDave
commented:
Nice, time for some real tires and a better 60 foot! I went 7.88 with only 285WHP with my 04 GT 2V
-
2 months ago
Mustang GT (New Edge) VS Mustang GT (S197)
I gave my friend the jump but it still didnt help him. My launch wasnt too good but it was still a 1.90 60FT
8.65@82mph
S197 GT ran 9.40 @76mph
BaznastyDave
commented:
Nice times for your mods! My best is a 8.49 on street tires and a 7.88 on slicks. 04 GT 5spd with cams. havnt ran it on the spray though yet
-
2 months ago
-
2 months ago
2004 Mustang Compilation Video
Before, during and after. About a year and a half process.......
BaznastyDave
commented:
@ricky16carreon watch the credits
-
2 months ago
2V Mustang runs 7.36@95.1
This is another run testing the headers I just installed. Not a bad run, but I had a better one just a few minutes after this run!
BaznastyDave
commented:
Very nice! My best 60 is a 1.61 N/A, with a little tweaking on the pinion angle and a drag bag in the back right spring i should be in the 1.5's on motor. What size shot and brand you spraying? I cant wait to get some times on spray.
-
2 months ago
2 valve Mustang with bolt ons and nitrous-In car
This is an in car vid of my first run for 2011. I added a upr k member and replaced the clutch. This is a 7.54@91.
BaznastyDave
commented:
Nice, with some suspension work you will be a lot faster, to date my best is a 7.88 with only 285WHP, on a 150 shot on shooting for 6.9's. Check out my vids
-
3 months ago
03 Mach 1 1/8 mile Gleason, TN
7.89 88mph w/ 1.60 60ft
N/A 4.30 et streets
BaznastyDave
commented:
Nice! I did a 7.88 @ 85.4mph with a 1.61 60 foot in my little 2V look at my vids
-
3 months ago
03 mach1 Gleason tn motor run 5500rpm launch
03 mach1 burnout 1/8 mile gleason TN
BaznastyDave
commented:
What was the ET?
-
3 months ago
Mustang Week 2011 HD - Mustang heads toward crowd, regains control!
Yes, I know I didn't get it on film. Yes, I know it wasn't THAT close. But it was something, and you can clearly see the direction the marks were g...
BaznastyDave
commented:
Man i was hoping someone got this video! lol sucks they got the last off it. 2nd gear line lock burnout then i ripped out in 2nd. Yeah i wasnt anywhere close to the ppl but they all backed up real quick lol I was the only guy to do a real burnout
-
3 months ago
mustang with nitrous
Mustang Gt With Nitrous and bolt ons. On the foot brake a 7.61.
BaznastyDave
commented:
@strokn88lx0326 Nice man, im shooting for 7.8's on motor, idk about spray. Throw some cams in there and you will be in the 7.4-7.5 range.
-
3 months ago
2004 Mustang GT walk around and exhaust clip
BBK ceramic LT's, VRS o/r X, SpinTech Super ProStreet Catback.
BaznastyDave
liked
-
3 months ago
2 valve on a 100 shot
This is a friends built 4.6 2 valve. Mild port on pi heads, cams and bullitt intake. Spraying a 100 shot and timing set low on the nitrous tune 10 ...
BaznastyDave
commented:
60 foot sucks bad. Needs suspension work but ok time. My car went 8.18 in the 1/8th which converts to a 12.7 on 18" wheels and Nitto on motor with 285WHP. Sounds like it was spinning which explains the 60
-
5 months ago
04 Mustang Speedo playing with Nitrous
Lots of tire spin, tires are 295/35/18 with about 500 Miles on them. Nitrous hits @ 3,100 and deactivates @ 5,600 RPM's
Stock suspension, 75 Shot, ...
BaznastyDave
commented:
@blunts4dayzzz that was stock motor with a 75 shot with bolt on's, car has CMS Stage II cams, full bolt on's, and a 90 shot now. Will be going to a 125 shot soon.
-
6 months ago
T.J. Miller - Good Morning ( A Mac Miller Beat)
BaznastyDave
commented:
Song's tight and love the beat
-
6 months ago
BaznastyDave
liked
-
-
8 months ago
2004 Mustang Exhaust
04 mustang, MAC O/R X-Pipe, Flowmaster super 44's welded into the stock tail pipes
BaznastyDave
commented:
@89MRCHUCKELS Painted it gloss black like in between the tails and front bumper lip
-
9 months ago
BaznastyDave's Car Vid
BaznastyDave
commented:
@nevermissclancom That vid was a LONG time ago, car has came a lot further since then. Check out my vids
-
10 months ago
Mustang GT Compilation Mix
small mix of the stang by JtH
BaznastyDave
commented:
@joshuaakakidboost The Corbeaus are going in soon and after i clean it up for Mustang Week i might make another video
About BaznastyDave's channel
@Tiger99dawg Only tuning issue was the fuel pump. After the cams were swapped in it cranked up and ran fine without a tune, drove it 2hrs to the dyno and got 34 MPG's with my Breenspeed 87 Octane gas saver tune. Gets about 26-28 MPG after the new tune on the interstate.