Bags2723's Channel

0 subscribers

0 video views

0:37

11 hours ago

TB02 Brushless w/ Turnigy ESC

Mock test of my brushless setup:

HK 5900kV motor

Turnigy Plush 80A ESC

phr1sk37 • 6,412 views

Bags2723 favorited
3:56

3 months ago

YouTube Challenge - I Told My Kids I Ate All Their Halloween Candy

Jimmy Kimmel Live - YouTube Challenge - I Told My Kids I Ate All Their Halloween Candy

JimmyKimmelLive • 28,648,447 views

Bags2723 favorited
13:38

3 months ago

DX6i & CCPM Full Setup Guide Part 3 Binding, Adjusting Servos, Setting Up Head Links

http://www.rc-help.com

Hello everyone. If there is one questions or suggestion that I get asked more than anything else, it's "can you make a "how...

RcHelpDotCom • 6,978 views

Bags2723 liked
- 3 months ago
  
  Bags2723 commented:
  
  So far I've viewed the first three videos of this series and the information you're offering is fantastic. I just purchased a 250GT and being that it's my first build I'm finding these videos very helpful. Thanks for all the detailed info. I look forward to the next one that covers the tail servo...
6:04

4 months ago

Soldering Techniques

These are the soldering techniques used by Syndyne Corporation's wiring team. Remember, if you do not have time to do the wiring yourself, Syndyne...

syndyneco • 16,504 views

Bags2723 liked
7:57

4 months ago

Trex 250 clone swash level

Trex 250 clone swash level

cruzroycruzroy64 • 1,007 views

Bags2723 liked
- 4 months ago
  
  Bags2723 commented:
  
  I like your vids. You make it pretty easy for anybody new to the hobby to follow and give some great advice but I agree with lTlrBudda, you should really avoid using subtrim if you can and adjust the links first, then, after you get the swash as close to level as possible, you can use the subtri...
4:12

4 months ago

Blade 400 Tail Rotor DS285 servo set up w stock gyro 10 20 09

Still trying to get my stock Blade 400 gyro working correctly? I have recheck servos hooked to the

6100E Spektrum receiver. I think maybe setting...

Senegal01 • 3,023 views

Bags2723 commented:

I've just been dealing with the same problem and after searching everywhere I finally broke down and paid a local hobby shop to fix it. They said they had to tighten the belt but the reason the tail slider drifted and

" creeped " over Like you showed in your video is because the gyro settings ne...
3:21

5 months ago

Ustawianie regulatora RCE-BL15X by maczar

maczar1994 • 743 views

Bags2723 liked
- 5 months ago
  
  Bags2723 commented:
  
  Can you please show me how program the esc again in English?? Thx
1:22

5 months ago

Mr snowdon

Bags2723 subscribed to fridgewater3
6:23

6 months ago

mods for mcpx

This video was uploaded from an Android phone.

fridgewater3 • 715 views

Bags2723 commented:

You guys need to grow up!! It's pretty rude to make fun of someone for their accent or the way they say things. This guy is trying to help you get better performance out of your Mcpx and all you can do is make fun of him?

What's wrong with you? The people here ate from all over the world and we...
- 6 months ago
  
  Bags2723 liked
0:49

9 months ago

Blade mCP x servo chattering on airtable

donaldsneffe • 4,544 views

Bags2723 commented:

Totally normal. This heli has no flybar and a three axis gyro which means that there is constant input to servos for correcting three axis. Heli's with a flybar won't do this because they only require a 2 axis gyro. Don't worry about it.
7:39

9 months ago

Blade mCP X Review and Instructional Video

Doing an Instructional video with Damians Blade mCP X

lamborghinicorvette • 6,342 views

Bags2723 commented:

Just a tip. Your battery will last much longer and give you more stable current if you charge it at 0.2 amps or, no more than 0.3 amps.
5:58

9 months ago

Blade MCP-X: In Depth Review

A look at the good and bad of the amazing Blade MCP-X

CHECK YOUR FEATHERING SHAFT! LOCTITE AND TIGHTENING IS REQUIRED!

E-flite has done it again ...

RobscoRC • 72,601 views

Bags2723 commented:

Best review I've seen so far. Great job. The only thing I noticed on mine is that, right out of the box it had way too much negative pitch and I had to turn all three ball links out four or five full turns in order to get It close to 0 degrees at half stick. Thanks for the great review.
1:22

9 months ago

Blade mCpx FBL problem

I'm guessing the board needs to be replaced, FBL system is acting up...

You can see the swashplate tilt to the right at ~1:15. The servo is stuck f...

mongoz56 • 10,790 views

Bags2723 commented:

In order to get 0 degrees at half stick. You may also have to adjust your pitch curve to 60% or 70% at center position instead of 50% like it suggests in the manual for the DX6i. Hope this helps. Mine flies great now and for a micro, collective pitch heli this thing is awesome. Good luck
8:33

11 months ago

Blade 400 3d Approches and Decelerations

The theory on how helicopter do Approches and decelerations and demonstration

sokal11 • 24,499 views

Bags2723 favorited
- 11 months ago
  
  Bags2723 commented:
  
  I've gotta say, you've got great flying skills but flying one of those in the yard while the kids are playing nearby isn't the smartest thing I've seen you do. I'm sure you know that anything can go wrong. That said, I really wish I could fly like that. I'll keep practicing. Thx for the videos.
7:28

11 months ago

T-REX 450 BLADE 400 ALL OUT WAR MUST SEE VIDEO

T-REX 450 VS. BLADE 400 A WAR THAT GET'S BETTER AT THE END, AND YES A CRASH. NO HELI PILOT'S WERE HARMED FILMING THIS VIDEO. JUST A FEW BURN MARKS!

shauna20118 • 143,578 views

Bags2723 commented:

To fix your 450 motor, just take a couple of rockets and BLOW IT UP!! that'll do it. Or I'm sure you've got a gun if that doesn't fix it
- 11 months ago
  
  Bags2723 favorited
2:53

11 months ago

E-flite Blade 120 SR FAST outdoor flight & a CRASH!

Flying my Blade 120 SR outside fast! Also a crash into a tree!

earthling1984 • 129,545 views

Bags2723 commented:

I agree, blade heli's are pretty durable. I also have the mcx2 and msr and they sure take a beating. Let's face it there's always gonna be those that complain and some people have more problems than others but with the cheap parts and easy rebuilds, blades can't be beat. Horizon hobby has the bes...
- 11 months ago
  
  Bags2723 favorited
2:31

11 months ago

E-flite blade mSR GIVEAWAY!

I am giving away my E-flite Blade mSR; simply enter a video response to join the contest!

Also be sure to check out Earthling1984.com. Still unde...

earthling1984 • 10,470 views

Bags2723 commented:

Kdclaunch. Thx for your reply but I guess I'm not getting that button that you said would appear because I'm using my iPhone. I'll try on my computer when I get the chance. Do you know if there is any way to post a video response with the iPhone?
- 11 months ago
  
  Bags2723 favorited
2:17

11 months ago

Blade mCPX 3D advanced flying!

Vince flying his new E-flite blade mCPX! Great flying Vince!

earthling1984 • 61,547 views

Bags2723 commented:

Great flying. I think I'll be getting one of these after all.
5:58

11 months ago

E-flite blade mCPx review & flight!

Unboxing and flying the E-flite blade mCPX! This micro heli is a flybarless CCPM heli capable of pretty much all 3D stunts! Don't miss out on thi...

earthling1984 • 68,085 views

Bags2723 favorited
- 11 months ago
  
  Bags2723 commented:
  
  before I continue with my blade 400? Please feel free to respond to my email at bags2723@yahoo.com I'd really like to hear from you and maybe ask you a few more things. Any help would be appreciated. Thx.
2:18

11 months ago

Blade mcpx Ceiling stick

Blade mcpx ceiling stick

32dreed • 9,590 views

Bags2723 favorited
- 11 months ago
  
  Bags2723 commented:
  
  I'm thinking about buying one. Seems like a good and durable little heli. great flight skills.

About Bags2723's channel

Created by

Bags2723

Latest Activity

Feb 24, 2012

Date Joined

Mar 12, 2011

Age

Country

Canada

less