Andrew Pitts ~ FurnitureMaker
Loading...
81
subscribers
21,865
video views
Uploaded videos
1-10 of 39-
Executive Desk Part 2
AndyPitts1000
232 views
Using thin veneers on curved and flat substrates for the desk sides and front.
-
Mantle Part 11
AndyPitts1000
256 views
Assembling the fireplace mantle.
-
Mantle Part 10
AndyPitts1000
301 views
Finishing the mantle with an oil and varnish mix followed by an oil and beeswax mix.
-
Mantle Part 9
AndyPitts1000
265 views
Preparing the mantle for finishing. Cutting tenon wedges. Cutting the rabbet for the maple panel. Planing the end grain of the planks.
-
Mantle Part 8
AndyPitts1000
269 views
Cutting joinery in walnut pillars for a fireplace mantle. In this video you will see deep tenons cut on the tablesaw using a tenon jig, see how these deep tenons are fit in...
-
Mantle Part 7
AndyPitts1000
254 views
Critical joinery on the large maple planks for the fireplace mantle, including use of the domino machine and cutting deep mortises with the router and a two flute end mill ...
-
Mantle Part 6
AndyPitts1000
151 views
Milling and gluing up three inch thick walnut planks to make the connectors between top and bottom main planks. Using Unibond 800 in cold weather.
-
Executive Desk Part 1
AndyPitts1000
517 views
Making an Executive Desk. This episode includes lumber selection, cutting thick veneers, and vacuum bag pressing thick veneers.
-
Mantle Part 5
AndyPitts1000
264 views
Milling the maple planks to dimension and gluing them up into 3-inch planks for the mantle. Andy uses his 16-inch jointer, and his planers to mill the lumber.
-
Mantle Part 4
AndyPitts1000
318 views
Making a fireplace mantle. This episode covers veneering the bent laminate substrates with fiddleback maple veneer, using a vacuum bag press.
Advertisement
Play all(39)