-
6 months ago
Big Bud 747
2009 Rantoul Half Century of Progress
theeasynine • 976,532 views
AmoralEngineer
commented:
-
6 months ago
Big Bud 16V-747 at Scales in Fargo, ND
The Big Bud 16V-747 left Big Sandy, MT headed to IL. The Big Bud 16V-747 is the world's biggest tractor and will be on tour this summer. The 747 wi...
GrouserProducts • 330,679 views
AmoralEngineer
commented:
@rn571975 I think it was close to 900, but there are alot of 16v92's depending on the app that put out 1400 or more.
-
6 months ago
Death of a Ford Super Duty
I really don't HATE Fords. I do prefer GM products, but I don't like them (GM) building their vehicles in Mexico while people here need work. I s...
roadragecustoms • 495,222 views
AmoralEngineer
commented:
@shaq84696 No, it doesn't.
-
6 months ago
Detroit Diesel Meltdown
Detroit Diesel on a stand running wide open with no governor until it stops. Sad to see yes, but interesting to see how tough the engine really is.
sandymonkey • 127,520 views
AmoralEngineer
commented:
@TheMrBlinx Idiots are easily entertained, i would have put this motor to ACTUAL use. Worthless college kids.
-
6 months ago
Starting 2-71 General Motors Diesel Generator
Priming,starting,Idleing,Full Throttle
jon4ford • 21,720 views
AmoralEngineer
commented:
@bigchevy80 Don't forget sherman tanks and almost every landing craft that saved out country during world war 2. The shermans had a power pack that was two 6-71s put together with a common tranny and the landing craft used 6-71s and 4-71s. The countless other apps i cannot remember, but 2 cycle...
-
6 months ago
Detroit Diesel 3-71 Running-1
Detroit Diesel 3-71 running again. Will be selling this engine soon
detroitdiesel33 • 43,917 views
AmoralEngineer
commented:
@icedragon99115 A 3-51 didn't exist as far as I know, a 4-51 is rare enough if your friend has a 3-51 he should bring it to pawn stars or something. Loop scavenging worked ok and the heads were damn simple but they weren't as efficient as the roots system in the standard scavenging 2 cycle diese...
-
7 months ago
Tank VsTractor pull 2_0001.wmv
A Donkey,Trucks, Bulldozer, Tractors and a Tank in a Tractor pull contest. www.tankedup.com.au
tank vs tractor
TankedUpPromo • 50,793 views
AmoralEngineer
commented:
Tank vs bulldozer tug of war..... Lets use a strap!
-
7 months ago
DIESEL V12 GERMAN WW11 TIGER TANK ENGINE RUNNING OPEN PIPES
WW11 GERMAN TIGER TANK V12 DIESEL ENGINE. FEEL THE POWER HEAR THE NOISE
gunvidder • 519,954 views
AmoralEngineer
commented:
@XxWindShadoWxX It is fuel injected. Being world war 2 era, that means it's a diesel. You can tell it's a diesel without even being a diesel mechanic like myself, fuel injection didn't come around for a while after world war 2 for gas engines. And both king and regular tiger tanks had a 700hp...
-
7 months ago
Garden Tractor Diesel OX Roast Mantua Ohio Truck Pulls
Nice Diesel
bummer1818 • 3,809 views
AmoralEngineer
commented:
@sgttroyer The motor is a 3 cylinder kubota, but it's a cub cadet tractor. Diesel cub cadets were kubota and john deere were yanmar if i remember correctly
-
7 months ago
-
7 months ago
Gas vs Detroit diesel
Gasser beats detroit diesel
obxboyoo • 6,022 views
AmoralEngineer
commented:
Where was the detroit diesel?
-
8 months ago
Super Modified Diesels in Idaho Falls
Two 8v92 Detroits vs. a Dodge Cummins. Who do you think will win?
hillpullingteam • 40,800 views
AmoralEngineer
commented:
@RLeBar1 Yep, the 5.9 cummins beat out engines over 10 years older than it that were still designed using 1930's technology. The fact that they are using engines (detroits) for pulling that were designed to run rock steady (NOT MODDED) for a half century at a time without overhauls and still doi...
-
8 months ago
Pull #1 by Tainter Machine Pulling Tractor at Ridgeland WI
http://www.taintermachine.com - 280 foot by by a Minneapolis Moline Pulling Tractor at Ridgeland WI. Built at Tainter Machine in Colfax WI.
randycarl1967 • 491 views
AmoralEngineer
favorited
-
9 months ago
AR-50 APS .510 Allen Magnum
I had the privilege, and good fortune, to shoot the Armalite AR-50 APS .510 Allen Magnum; thanks to my good friend Rick. We were shooting 750 grain...
RazorTNK • 1,643 views
AmoralEngineer
commented:
@letnif Most people start at much less than 100 yards even, I haven't owned a newly put-together quality scope/ rifle combo that would print at 100 yards. After a while, they all made clovers.... You don't have to sight in rifles on call of duty, thus the question i'm responding to.
-
9 months ago
338 Lapua Magnum Rem 700 MLR
shooting steel at 920 meters with a remington m700 mlr in .338 lapua magnum avg group of 15". Now with Sightron SIII 6-24x50, Burris Tactical rings...
ausmade • 443,570 views
AmoralEngineer
commented:
@malaymercernary I didn't think it was terrible for an m700 mlr at 920 meters, but i'm imperfect
-
9 months ago
Man! That Bison owned you!
Huge Bison is walking past Yellowstone camper who jokingly says "I think I can take him" ... leading to bison doing a 90 degree turn and owning him.
dykstrabob • 239,308 views
AmoralEngineer
commented:
@sastaroo How about this is why "folks" in general get killed by animals? With the number of "white folks" in the world wouldn't you say your comment is pretty ignorant? But I guess you are better than the rest, giving you the right to generalize. Wish I had that power.
-
9 months ago
375H&H Culling Feral Goats,New Zealand
375H&H Culling Feral Goats,New Zealand
EmpireSafaris • 11,242 views
AmoralEngineer
commented:
@theodoroscristou Well, I have hunted and taken alot of different of different animals with alot of different cartridges. And the fact that people think cartridges like the .223 remington, .243 winchester, and .270 winchester do less meat damage than bigger cartridges like the .358 winchester, ...
-
9 months ago
Vintage High Tech Redneck Super Stock Diesel Tractor Pull
Here's a run from the Guernsey Co. OH Fair in 1994 in the open class. The guy in the blue shirt is the owner of the tractor; he let my old man make...
oliverpuller1655 • 8,200 views
AmoralEngineer
commented:
@farmboi27 Yeah so many awesome folks don't pull anymore in a lot of different classes everywhere due to consistently tightening restrictions.... What can you do? =/
-
9 months ago
Oliver 1950 Hobby Stock Puller
An Oliver 1950 GM Diesel, pulling at Ellsworth, WI. This is the Most Boys Oliver.
GMdieselman • 12,669 views
AmoralEngineer
commented:
More videos of this tractor?
-
9 months ago
1951 Kenworth pulling truck
1951 Kenworth hooked up to the pull sled at the Big Iron Classic in Kasson
thunderbueller • 38,337 views
AmoralEngineer
commented:
Those little stacks sure do rap with the big cummins o.o
-
9 months ago
Lady Butterfly 12V-71 Detroit Diesel
2008 warren county fair
foxstags • 23,757 views
AmoralEngineer
commented:
@TurbinePower69 Wow what a chore to make that legal! Should really put a hurting on the competition with the 92 series 12 banger in it though, I can't wait to see it hope it works out for yah! I think alot of heavy haul trucks especially in canada and alaska used the 12v92's, although I may b...
-
9 months ago
Tractor Pulling Somerset 2007
Tractor Pulling Somerset 2007
ramblingman300 • 165,570 views
AmoralEngineer
commented:
@INTIMIDATOR3FAN Front sits lower, so when the weight of the sled pulls down on the back the weight transfers better to the rear wheels. You don't really want your front wheels on the ground, nor 3 feet off the ground. You just want them barely weightless
-
10 months ago
Angry Father Prank Call - OwnagePranks
This is a prank call that was done by me in 2006. It's one of my personal favs, so I thought I'd upload it to YouTube. I made this video back then,...
OwnagePranks • 1,822,909 views
AmoralEngineer
commented:
@TheCguy96 That's odd, adopted people don't have real parents that fucked each other? And you got 93 thumbs ups.....
-
10 months ago
Elefantentöter .577 nitro express magnum
Ist weniger für die Öffentlichkeit
Orodreth888 • 354,520 views
AmoralEngineer
commented:
Running a .700 nitro and .577 rex pressures result in you (after firing) needing to place the double rifle over a fence or log, and having you and a buddy sit on both ends of it while holding the break release open just to break the gun open again......
-
10 months ago
shooting a 700 nitro express
shooting a 700 Nitro express, firing a 1000 grain bullet. Rifle was a Searcy double rifle, made by Butch Searcy of Boron, Ca.
byf42 • 97,613 views
AmoralEngineer
commented:
@byf42 The 4 bore runs much lower pressures too. Nice job on the video, shows that anyone who actually knows how to shoot can handle one of these ridiculous and pointless rounds.
-
10 months ago
500 JEFFERY heavy recoil from the lightest 500j in the WORLD
6 pound 500 jeffrey with no recoil pad built by Mike Cuypers of Bijou Creek Gunsmithing. Winchester M 70 stainless steel 16" barrel Shooting 570gr...
BIJOUCREEK1 • 67,924 views
AmoralEngineer
commented:
Port the barrel and grind to fit a limbsaver and you've got one HELL of a handy charge stopper for use anywhere!
-
10 months ago
45-120 Max Load, more recoil!
Well, the first video is 75 grains powder, this max load is 85 grains of powder. Should be about what a 458 Lott can do at the top end.
Sorry abo...
tykempster • 47,194 views
AmoralEngineer
commented:
@TheFoundersWereRight Pressure has more to do with the strenght of the action than how big the overall round is a gun is chambered for. There are guns I would easily trust to be chambered for a .505 gibbs, but at the same time not want to chamber it for a .30 caliber gun running over 65k CUP
-
10 months ago
Rock Island Armory 1911 .45ACP
A video talking about a new gun I got...
cutlerylover • 159,694 views
AmoralEngineer
commented:
@GROVESTREET1017 Hogue makes nice rubber grips for 1911's, they make them hold like a glove vs the wooden traditional grips, especially if you have larger hands. I wish I had gotten the rock island vs the remington I have, and to all those saying more expensive are more superior 1911's? A super...
-
10 months ago
BBC Nature: Mega Tsunami - Alaskan Super Wave - Amazing Survival
Two survivors of a Mega Tsunami tell their stories of the day the 1/2km high wave hit Lituya Bay.
BBCWorldwide • 4,577,355 views
AmoralEngineer
commented:
I honestly don't see how someone could dislike this video hahahaha. It's just a video about something that happened. At least 245 of the worthless retards on this planet have watched this?
-
10 months ago
Weber County Demolition Derby 2010
Weber County Demolition Derby 2010. Demolition derby, bad crash. Man gets hurt. Fight breaks out in the stands. Police are called in to get it unde...
TheHardHeartedBand • 8,793 views
AmoralEngineer
commented:
@chevy79c10 Well I would certainly truck and tractor pulling actually takes more strategy if you are doing it competitively, it also requires intelligence to build a pulling truck or tractor. It doesn't require a whole lot to destroy things.
-
10 months ago
Why I Want a WEATHERBY
No description.
weatherbytube9 • 4,489 views
AmoralEngineer
commented:
@Moldovawineimporter To be honest, it sounds like your groups could be more operator error than rifle error. Most rifles will outshoot their owner, and weatherbys are very accurate. I have owned them but can't say on customer service as I haven't used it. Did you make sure your scope was tight...
-
10 months ago
A couple rounds of .375 H&H Mag.
Because, you never know when an elephant will step out of the woods
86Procraft • 3,157 views
AmoralEngineer
commented:
Cool video! She really isn't bad to shoot is she? It's an easy round to fall in love with
-
10 months ago
Reloading .375 H&H mag bullets
eh, just Reloading some .375 H&H magnum bullets. At the end is a comparison of the bullets next to a 5.56x45 round
shortthrow50 • 2,191 views
AmoralEngineer
commented:
Cool video! I have the same setup but am just beginning, how do you set your resizing die up in the press? No matter what depth I run mine at it seems to scrunch up the neck of the case and mush it outwards! I'm working on load some nosler accubonds (260)
-
10 months ago
2010 Light Super Stock Tractor Pull
2010 Light Super Stock Tractor Pull at Shelbyville Indiana.
mbowen89 • 4,217 views
AmoralEngineer
commented:
Allis at 2:00 has been pulling since the 70's if it's the one i'm thinking of
-
10 months ago
Bad apple pull in ritzville
Tripple turboed tractor with a Detroit diesel.
dvt4u • 239 views
AmoralEngineer
commented:
@allisguy1 You are an idiot.
-
10 months ago
Breaking Into A 10 Gauge Gun Safe. 4 Different Ways. Drill Punch Attack
This is whats wrong with, and how easy it is to break into, some imported gun safes. Unfortunately, some American safes can be opened up using thes...
sturdysafe1 • 35,321 views
AmoralEngineer
commented:
Nice of this video to inform would-be criminals of how to break into various safes. I didn't spend 1500 dollars on a gun safe, and would prefer my mid priced safe to stand somewhat of a chance against criminals without them learning on youtube how to get into it.........
-
10 months ago
me shooting a 12 bore
shooting
pubsongs • 3,039 views
AmoralEngineer
commented:
What type of shotgun is that? It looks like an 870 but then again it doesn't look like an 870 haha o.o??
-
10 months ago
375 magnum
shooting my rifle
grovestorm • 36,024 views
AmoralEngineer
commented:
@wallyjones1 If you've ever shot any of the .300 rifles, or ultra mags, or a light weight 30-06 then you will find the recoil from the .375 h&h to be not bad whatsoever especially in the cz 550 which is a nice heavy well constructed gun. I prefer to shoot my cz 550 in this caliber more than the ...
@MattytheDem All of that coupled with 4 valve heads and a blower made them very loud too, a 16v92 is two 8v92's bolted together.