Alexgrosy's channel
Loading...
81
subscribers
441,611
video views
Uploaded videos
1-10 of 15-
Rough turning of big aluminium piece on C3 mini lathe
Alexgrosy
464 views
Rough turning of big 80x200 mm aluminium piece on Sieg C3 mini lathe.
Some modifications were made to the lathe:
- Spindle bearings changed to tapered roller bearings
- Cha...
-
Lanz Bulldog D6006 Ackern / plowing
Alexgrosy
1,142 views
Plowing with my newly restored Lanz Bulldog D6006
Was running 60 hours since complete restauration in march now.
Ackern mit Lanz Bulldog D6006
Lief seit der Fertigstellung...
-
Lanz Bulldog D6006 first run after complete restauration
Alexgrosy
11,125 views
8 months work
-
Model gas engine pumping some water
Alexgrosy
1,505 views
Homemade model gas engine pumping some water with a homemade water pump. Flow rate is about 1 liter per minute depending on the engine rpm!
-
Homemade model stationary gas engine - cold startup
Alexgrosy
5,084 views
Cold startup of my engine
-
I.A.M.E. Pampa T01 Ploughing, longer footage
Alexgrosy
12,020 views
Restored Pampa tractor ploughing at vintage tractor meeting
-
"The Little Wonder" four stroke model gas engine
Alexgrosy
48,176 views
My newest engine from The Engineers Emporium, UK. One of the first runs still on methanol/oil mixture which is best for breaking in. Going to change to regular gasoline soo...
-
I.A.M.E Pampa T-01 Tractor ploughing
Alexgrosy
6,668 views
My Tractor ploughing at a small autumn meeting
-
I.A.M.E Pampa T-01 Tractor, idle with new engine
Alexgrosy
21,474 views
Engine has been rebuilt:
Cylinder bored to 230,00 mm, new piston, new small end bearing.
-
Modified RMC Loyal Cycle Engine, hit & miss mode
Alexgrosy
10,326 views
This is my slightly modified RMC Loyal cycle engine running as a hit&miss.
I've built a small venturi type carb, it's easier to start as with the original surface vapour c...
Advertisement
Play all(15)