-
AN3jets liked 1 month ago
Re: Goodwood - Festival of Speed 2008
Here's my take on what I've seen on Sunday 13th July 2008 at the Goodwood Festival of Speed.
This time, without music.
-
Airventure 2011 - Heaven on Earth (SLICK)
After a total of 22 hours of flying in our 1949 Piper Clipper, my father and I successfully completed another adventure up to Oshkosh, Wisconsin fo...
-
AN3jets subscribed to DragTimesInfo 1 month ago
-
AN3jets liked 1 month ago
Engineering Design Takes Flight
Senior aircraft designer Bob Ruszkowski recalls what drew him to a career at Lockheed Martin discussing his interest in drawing, engineering and de...
-
The Myth of the Mighty Russian Tank
A few pictures that Russian armor fans don't want you to see...
Yeah, I know that some of these are Iraqi & Chinese built, but so what? They're st...
-
400 HP Corvette V8 Engine in a Cessna 172 - experimental
Quiet Aviation has put the convenience, power and reliability of Detroit's best engineering into a complete package that can be installed in a vari...
-
-
AN3jets liked 2 months ago
New Concept Heli 2nd Test flight
Here is the 2nd Test flight that turned into a total fun flight with this new concept RC helicopter. This time we tried some altitude and this thin...
-
RX-792P (4 rotor).wmv
Mazda 4 rotor factory racecar - RX-792P. Cold start and free revving at Downing Atlanta.
-
Jetpack commercial applications
Martin Aicraft Company has been approached by over 2500 individuals interested in buying a Jetpack. In addition we have expressions of interest fo...
-
-
AN3jets subscribed to LockheedMartinVideos 2 months ago
-
AN3jets liked 2 months ago
Israel Takes Care of Bussiness
http://www.norcalblogs.com/...
What you are about to watch is an actual event. The video was filmed by the Israeli military. It is a fully armo...
-
robot arm ride...
A car seat with a 5 point racing harness welded to a robotic arm. Mind your head!
-
3 Axis Manual to 5 Axis N.C. Mill conversion - 1st test code runs.
1st simultanious test of all 5 axis' on our own CNC conversion for our manufacturing Business.
3 Phase 5 H.P. Vertical Mill. 2 Axis Rotary Table. ...
-
1st machining test of our 5 Axis CNC conversion - 3 Axis only
1St machining test of our 5 Axis CNC Mill conversion using only 3 axis' and some old code we had from a Turbine project years ago.
-
-
AN3jets liked 3 months ago
Close Up - 1st machining test of our 5 Axis CNC conversion - 3 Axis only
1St machining test of our 5 Axis CNC Mill conversion using only 3 axis' and some old code we had from a Turbine project years ago.
-
AN3jets subscribed to brocksterification 3 months ago
-
AN3jets liked 3 months ago
Hobbyking 3D - Michel Wargo Flies the Reaktor EPP 800mm Arf.
Michel Wargo Flies the HobbyKIng Reaktor EPP 800mm Arf.
-
UH 19XRW Hoverwing™ Ground Effect Hovercraft,
Universal Hovercraft is proud to offer the UH-19XRW Hoverwing™ ground-effect vehicle for industrial, commercial and military sales. It is available...
-
AV-8 Harrier 1/6th Scale RC Ground take off.avi
This was a quick test to see how the Harrier would handle when its in ground effect, it come up nice and level. This was done with gyros so it not ...
-
Model R/C Turbines
I love "How It's Made" on Science channel.
-
-
AN3jets liked 4 months ago
AV-8 Harrier 1/6th Scale RC Hover Test
This is a 1/6 th Scale Harrier, it weighs 17.5 pounds ready to fly. This is a short clip of one of the hover test we have done.
With batteries on b...
-
AirBike POC Prototype 003
Third prototype, first tests as printed.
-
-
AN3jets subscribed to AlliedAeronaut 4 months ago
-
-
Bull vs Bear So Funny.flv
Bull vs Bear So Funny
-
Model Space Shuttle With Firing Rockets
Flying a model shuttle with some rockets firing!
-
Verticopter-II UAV hover flights
Here is some backyard action with Proto5 hovering on 3 electric motors.
Since the last runs at AMES, we upgraded to stronger motors and a bit large...
-
-
AN3jets liked 6 months ago
P-51D Mustang "Ferocious Frankie"
This is a video of The Old Flying Machine Company P-51D Mustang 'Ferocious Frankie" For more information about the aircraft and details on how to ...
-
F22 Raptor Take-off at RIAT 2010
Buy tickets at www.airtattoo.com. This is the F22s first take-off from RIAT 2010!
-
-
AN3jets liked 7 months ago
Paramotor World Record 13 Year Old Air Trike Pilot!!! Perfect Powered Paragliding First Flight!!!!
http://wppga.org/category/w... - http://u-turnusa.com World paramotor record set 6/26/2011 as powered paragliding trike youngest pilot in...
-
AN3jets subscribed to OffshoreElectrics 7 months ago
-
AN3jets liked 7 months ago
Pure Merlin Engine Sounds "Without Music".
The great sound of the WW2 merlin engine.
-
BRM Type 15 Revving at National Motor Museum, Beaulieu
Warming up for appearance at the Goodwood Revival 2010
-
TURNIGY CA 120-70 teste 03.wmv
credits of the test performed by Greg Covey
-
-
AN3jets subscribed to diablotinxl 7 months ago
-
AN3jets liked 7 months ago
.50 cal Barrett fired from the kneeling!
T-shirts for sale at the link below! I did the design let me know what you think good or bad!
Please "Like" me on Fa...
-
AN3jets subscribed to TEDtalksDirector 7 months ago
-
AN3jets liked 7 months ago
Tasmanian Electric Flying Trike - First Flight Tests!
24/12/08
After months of preparation, Dave and Al have finally completed and flight tested the electric microlight! This video shows the first two...
-
AN3jets subscribed to BestUsernameEverMade 7 months ago
-
AN3jets liked 7 months ago
Custom High Power Brushless ESC For EV use
Watch in 480P for better quality.
This video shows a modified Turnigy Aero-drive C80100-130 with custom Hall Effect Sensors.
The video shows exc...
-
AN3jets subscribed to olivervcto 7 months ago
-
AN3jets liked 7 months ago
Turnigy CA120-70 power benchmark report
Testing low-cost motor unit from Turnigy (distributed by HobbyKing in Hong-Kong, P/N CA120-70), ESC controller is a SPIN 300 Opto.
Lipo configurati...
-
AN3jets favorited 8 months ago
AN3design Portfolio Solidworks and Industrial design stuff.
Some of my designs and CAD (Solidworks) models and a few of my early Uni projects.
-
AN3jets liked 8 months ago
riding an OV-10 bronco part 1
piggy back on an ov-10 bronco over basilan strait










