ADR33GTR's channel

The Fabricator Enters the Twi1ight Zone!

This is a combination shop vlog/ Twi1ight Zone fan movie. Hope you enjoy.

Please help support my videos...

How to make a Christmas tree displays for shops. The video takes you through the design stage, printing and then demonstrates how the product cuts ...

Sterling Surfaces leaders in Corian Solid Surface thermoforming

Educational video showing the fabrication of a project called Nubicle

Designed by Christopher Terrell from Auburn University

Project sponsored b...

betulla 3mm velocità 20mm/s potenza 50%

A new personal mobility technology, Honda U3-X with the world's first drive system that enables movement in all directions. Honda says this techno...

http://www.widgetwerks.com

I scored this demo kit off eBay and wanted to share a little about these actuators and how easy they are to setup and u...

Origin Laser machine demonstrating laser engraving mabel and tiles.

Origin Laser machine setup video filmed on a OL-6040 Origin Laser machine, including laser beam alignment.

This is the recording of my 40 watt Buildlog 2.x Laser Cutter cutting a piece of 6mm clear acrylic. It is amazing how clean the laser cutter is abl...

Early testing of of an XMOS processor based laser engraving controller.

see www.buildlog.net for more details

This is my home made spindle raiser being used to turn a large flywheel which is normaly beyond the capacity of the lathe. I origionaly made it to ...

I get a lot of questions about the sand I use. Here is my first attempt at making my own greensand. The results are very good. It was a lot of work...

This is my new baby. Murphee Journey Mills. He's a 10 week old pure bred golden retriever puppy. we drove all the way to Indiana to pick him up. He...

Leonard from Kosmic gives you some tips on what to look for when purchasing studio monitor speakers.

He takes you through some of the range that w...

THE-LOWDOWN.COM Meet - A R34 GTR showing off its launch control system! - "RB28"

***Performed on a PRIVATE ROAD!***

Angry Kid is trying to have a wee, but his sister keeps putting him off.

DIY Built CNC Router using AC Servo system from DMM Technology

First Axes Moving

You are looking at the bottom of the router

The Build can be seen...

A pan and tilt camera mechanism built using laser cut abs plastic and servos

original video

http://www.youtube.com/watc...

Visit the John Hart Product Page - http://www.johnhartmachinet...

Vertical Center Smart 530C－ a...

Back in the summer of 2006, we were using an ABB IRB 6600 robot (225 kg payload) for a project. In between the time that we took delivery of the r...

2 guys in a pickup decide to have some fun with a guy in a fancy car - and find he's got more than just money on him. LOL

[ Full info and comments @ http://www.RoboCNC.nl/?p=2831 ]

[RoboCNC Frees & Graveerwerk http://www.RoboCNC.nl/]

[Like us @ http://www.facebook.com/...

Lenovo have once again asked Gav and Dan to test out some of their new hardware. This time, the guys give the Thinkpad Tablet an absolute beating!

...

Testing Z-axis. 560mm SBR20 rails, RM1605 ballscrew.

BECOME A FAN ON FACEBOOK http://www.facebook.com/Gra... or just search for 'Graham Friend

FOLLOW ME ON TWITTER!

http://www.twitter.com/Graha...

[ No Full info link, just a video this time...]

[RoboCNC Frees & Graveerwerk http://www.RoboCNC.nl/]

[Like us @ http://www.facebook.com/Rob... ]

...

I made a quick and dirty version of a sheet metal bending brake in order to create the shape of some art deco style footlights I was building for a...

http://www.machineshopcours... Learn one of several techniques for producing a bevel, Darrell shows you have to use a V-block for the task in thi...

Testing the Damencnc 0-10V interface on my KEB VFD with some small modifications.

Tests are from zero to 500,1000,4000,8000, zero,8000, zero.

Spee...

G0704 Spindle Tramming Tool

Click here to buy Mylo Xyloto http://links.emi.com/coldpl...

This video was directed by Mat Whitecross in 2011 and was filmed in South Africa an...

.

First test of the x-axis.

- 25x10 Ball screws for the x-axis

- 2x Sanyo Denki 6 A 3,6 nm nema 34 steppermotors for the x-axis

- running on USBCNC...

The Diamond 20CSB Swiss-type lathe cutting, rigid tapping, engraving, and threading brass into a pagoda complete in one setup. Includes subspindle ...

Shaft