2JZstang's channel
Loading...
-
5 months ago
2JZ Mustang 10.04@135 on radials
Stock motor, Turbo 400, Precision Turbo Billet 76, E85
www.ExcessiveAutosports.com
2JZstang
commented:
-
6 months ago
2JZ Ford Mustang
Dan @ Excessive Autosports 2JZ Mustang made 525whp at 25lb of boost on a 67mm turbo stock 2JZ tuned on E85 with an AEM ems, T400 trans and lots of...
2JZstang
commented:
@MrHeadshot1982 Yes, just look up 2JZ Mustang and you will find plenty of videos. 9.50 so far on a stock engine.
-
10 months ago
Excessive Autosports 4.6 D1SC Mustang build
Jeremy P's D1SC built 4.6 dyno pull 724 hp with 6 speed manual
2JZstang
uploaded
-
11 months ago
Drag Week 2011 DVD Trailer - 1320Video.com
Drag Week 2011 presented by Hot Rod Magazine and Gear Vendors!
Check out the trailer of the 5 day event that took place over 1400 miles of driving ...
-
11 months ago
2JZ Powered Mustang 2nd time at the track
E85 powered 1993 Mustang Coupe Precision Turbo billet 76mm leaving with no boost,
www.ExcessiveAutosports.com
2JZstang
commented:
@carey540 Lots of stock engines run on E85. Flex fuel my friend. Gotta keep up with the times! ;) Oh, and she is a tad over 2600. Just not saying how much.
-
11 months ago
2JZ 93 Mustang first time at the track
93 E85 Mustang notch with a 67mm turbo and a Toyota 2JZ engine. Leaving off the foot brake and almost no boost.
2JZstang
commented:
@carey540 Yup, thats what I thought. Have fun trolling ;)
-
11 months ago
2JZ Foxbody
2JZ foxbody mustang makes an 1/8 mile pass at Mid-America Motorplex in Council Bluffs, Iowa.
2JZstang
commented:
Hey! It's my old car! Just wait until we bring it down this year! Lots of new goodies...
-
11 months ago
2JZ 93 Mustang first start and idle
2JZ swapped into a 93 LX coupe, makes over 500 wheel through a turbo 400 on 20lbs of boost w/pt67
2JZstang
commented:
@Speedmccool385bitch What did you want me to do with the N/A 2.3 engine, slipping auto trans, and 7.5" rear end? :P
-
-
1 year ago
2JZstang
commented:
It is just a rough startup map.
-
-
-
1 year ago
2JZstang
commented:
@DVcustomZ I am only running a 70 shot on the trans brake. You may not need as much since your converter is looser than mine. I don't spray it down the track. I am running a PT Billet 7675 with 160# injectors and E85
-
-
1 year ago
Turbo KA24
Ball bearing Billet 6765, Built KA24, AEM EMS, ID1000cc injectors, E85 fuel, 500+ WHP
2JZstang
uploaded
-
1 year ago
DSM drag racing - 11.6 @ 125mph
Holset powered DSM drag racing. 11.6 @125mph
2JZstang
commented:
@mrpeepers422 Has a holset, E85, built engine, stand alone
-
2 years ago
2jz mustang vs. 5.4 TT cobra
Broke loose on the line, then the TT 5.4 cobra broke loose after the 1/8th. Not great runs...
2JZstang
uploaded
-
-
About 2JZstang's channel
@need2speed94 Actually it's the forged internals from the factory and 7 main caps on an inline 6 engine. They are strong from the factory and the car just ran a 9.32 last weekend with completely stock internals and head. Thats why.