Black Snake Blown
Comments are no longer welcome on this video- Too many goobers and trash talkers. Comment notices coming in day and night..... I'm done with it.
H...
bryan50rogers • 149,702 views
Fast N/A Mustang GT 1/4 mile
i absolutely hate this track. i ran a 13.88(personal best:13.53) with a soft launch. granny shifting. the car is mostly stock with a few mods. bbk ...
jeffro1265 • 10,817 views
N/A Bolton GT: Quest for 12's
2004 GT with Longtubes, intake, plenum, TB. Stock suspension, lowered.
1.74 60 foot
8.13 @ 86 1/8th mile
12.77 @ 106 1/4 mile
tsprink2 • 17,788 views
12.16 @ 112 N/A 2v. Stock motor, stock heads
1.62 60'
7.74 @ 88
12.16 @ 112
Stock motor, stock heads, full boltons, full suspension, 410s, built rear, HiTech stage 2 cams
tsprink2 • 22,449 views
2001 mustang gt engine tick
I don't know what is the cause of this tick but I have been told it could be a lifter.. Any suggestions are greatly appreciated
1,551 views
Mustang Gt vs trans am
2001 mustang Gt vs ws6 from a 70. Ws6 known mods- full exhaust, 3.73s, intake, and tune.
Mustang mods- bassani headers, bassani xpipe, slp lm2 cat...
53 views
01 mustang Gt vs camaro z28
My mustang vs 30th anniversary camaro from a 40.
29 views
2001 cammed mustang Gt
Short video of idle with new exhaust, bassani mid length headers, bassani offside xpipe, slp loudmouth 2 catback, Anderson n32 cams, full bolt ons,...
76 views
mustang gt vs nissan 350Z
mustang gt vs 350z
kreep84 • 34,826 views
actually my grandma has a bone stock 06 vert gt and it got beat by half a car against the new 370z, my 01 runs off on those cars... but hey what do i know
2003 turbo cobra 78mphgpr vs nitrous frc corvette cbrtrx
nice video of his buddy flying over head watching the action too.
thedriver • 3,700 views
man that vette got sucked up! just sucks that whenever that happens the person in front always seems to let off right before you pass them
2011 GT500 vs. 2003 SVT Cobra
This video was uploaded from an Android phone.
mwstevens86 • 153,406 views
03-04 cobras came with 396 rwhp stock... under rated. plus there is a big weight difference, i bet stock on stock the cobra still woulda won the race
2011 GT 5.0 vs 02 2v 4.6 GT
02 GT Misses a gear and needs the driver mod.
dolsvt00 • 2,579 views
you sound like this guy i know except hes all about ricers. my setup is the exact same as the setup on anderson for my cams besides the heads and intake. ive rode in an lt1 and its slow as SHIT! my car isnt even tuned yet and the fuel pump needs to be replaced but hey whatever you wanna think jus...
2001 Trans Am WS6 vs 2011 Mustang GT 5.0
1st Race: Dig, 5.0 Jumps
2nd Race: Dig, WS6 Bogs after launch and 5.0 takes off
3rd Race: No Passenger, Even start, 10mph Roll
4th Race: No Passeng...
HDFlixx • 187,025 views
how does the 5.0 run off on the ws6 from a dig and the ws6 never picks up any ground but in the roll the ws6 wins? i highly doubt that because my 4.6 2v will beat ls1 cars.. btw if the 5.0 was a 6 speed that ws6 wouldve got its ass eatin alive
MX vs ATV Alive Discussion w/ Supercross Gameplay from Reflex
In this video I discuss the new up and coming game MX vs ATV Alive. I talk about the mx vs atv alive trailer, some gameplay footage I have seen, an...
LuskMotoX • 196,153 views
I think James helped with the game, it looks like it's gonna be sick, I played it in Dallas this last weekend at the supercross race and I wanted to buy it right then haha. Btw I hope u aren't a Chad reed fan if ur into supercross that much, if u are just watch the race from Dallas, you might get...
cammed and nitrous 02 mustang gt
The car has full bolt ons, stage 2 cam, 100 shot of nitrous and nitto 555 drag radials
snarepimp • 6,832 views
You need to put a video up of drivin the car and spraying! I have an 01 with Anderson n32 cams and I'm about to put a 100 shot on it so I wanna see how the car responds with the cams
2.3l Whipple Cobra vs Turbo LSx Camaro
2.3l Whipple Cobra vs Turbo LSx Camaro
TheBayAreaRacing • 29,644 views
These 2 should get one from a dig it would be a great race!
Z28 Camaro vs Twin Turbo Mustang GT
auto vs auto
in car and out
Camaro - LS2 with a cam. LS6 heads, Minor headwork. All motor. Mickey thompson Drag radials on back
Mustang GT - Twin...
jp229 • 141,777 views
Actually mustangs are heavier..
corvette C5 vs camaro 2010 SS std
any question if its a V6 or V8 I have another video and see the hood! http://www.youtube.com/watc...
jarqlgrq • 531,925 views
1) it's not a v6, if it was a v6 that vette would have ate it alive. 2) a c5 corvette(base not z06) weighs about 2900 with a 150lbs person in it.. And it has 350 hp stock. New ss has 425hp stock but is Atleast 600lbs heavier without someone in it. A mach 1 beats 2010 v6 camaros EASY. and a corvet...
GT W/blower vs cam'd LT1
This video was uploaded from an Android phone.
sepno77 • 660 views
U sure that Gt had a blower on it? My buddy raced a full bolt on cam lt1 camaro and my buddies mustang had headers gears and intake and kept up with it.
12 sec n/a gt
my 1st pass with stage 1 anderson cams, 90 degrees out and it went 12,98 with a 1.74 60 foot, all mods include bassani x pipe, bassani cat back, an...
mustang281gt03 • 6,586 views
i have a video of it idling on my page, and also some crappy videos of some races.. i love the way the cams sound! driveability right now is kinda tought cuz i have 3.27 gears still, but im picking up some 4.10 gears next week and also some wheels and tires for the track next weekend! im hoping ...
srt4 vs mustang gt
srt4 vs mustang gt
wwwMyFloridaSRT.com
dhrhernandez • 3,767 views
This is where turbo cars are best at, from a roll! Go to my page on YouTube and you will see my 01 Gt beat an srt4 from a dig.. When he passed me is when I let out. 1/4 mile and my car had it easy! WITH spinning all the way through 1st!
SRT4 vs Mustang GT
srt4 20 psi VS. modded mustang GT
Roq999 • 13,454 views
I myself witnessed a 4v beat a neon with stock turbo at 20 psi... My 2v Gt that's CAMMED and is full bolt on got beat by it from a 40 by like 3-4 cars.. But from a dig I beat the srt4 by a car. But 2vs have shit top end and a turbo car loves roll racing... That's where they are best at!
Mustang Gt vs Mach 1
My 01 Gt vs a friends Mach 1 from a 40.
01 mods- Anderson n32 cams, cai, 75mm tb and plenum with intake spacer, underdrive pullies, shorty headers...
84 views
A little wine
StangStalker • 737 views
I have an eaton with a 2.88 and just ordered a 3.10 pulley cuz it's goin on a stock motor, when I was reading on the pulley it says only 1-2 psi increase from stock so wouldn't that mean no more than 10 psi with that pulley? Or does it work differently since it's setup up differently to work with...
SVGT It's Alive!
It's Alive
StangStalker • 567 views
Just got an eaton and I'm lookin to do this with my 2v as well, what did you do when it came to the piping and heat exchanger and all the little stuff for that?
Cammed 02 Mustang GT
SLP Catted X-pipe, Slp Loudmouth Cat-Back, Comp Cam 270, TrickFlow 4.6 2v Twisted Wedge Heads and balls
sick2v • 104,539 views
headers would do you wonders
Cammed mustang Gt
Gettin on it a little after putting the new cams in! Before tune
131 views
01 cammed mustang Gt
First start up in a few months of workin on it sorry the cars dirty I'll get some videos up of it soon as well as when it gets tuned!
190 views
Twin Turbo Cobra Mustang dyno, 1060whp
9/19/09, House of Boost Cars Coffee Cure charity car show. Twin Turbo Mustang Cobra @ 26psi. Made 1060whp boost only (no nitrous). www.houseofbo...
quick4door • 63,880 views
1% car ftw!!! sickest cobra ive ever seen!
2.8H Kenne Bell Cobra
2.8H Kenne Bell Cobra
+many supporting mods
stock motor
605rwhp / 535rwtq
gsloth07 • 27,282 views
gonna take a guess and say bassani exhaust? sounds exactly like my friends that has full bassani, sounds awesome tho!
'04 350z vs. 99-04 Mustang gt
350z - Test pipes, intake, motordyne plenum spacer
Mustang - Unknown mods
Miketsi1986 • 102,897 views
99-04 have the same hp besides bullitts, Mach 1s and cobras there for it doesn't matter
04 GTO vs 07 Mustang GT
07 GT Mods:
BBK CAI + Brenspeed 93 Tune
Off Road X + FRPP/Borla Stingers
4.10s
300rwhp / 318rwtq.
04 GTO Mods:
Kooks LT's + Catted Mid pipe
Int...
whtcanbrwnd04u • 256,225 views
I would think the same thing and I did for a little bit until I really started researching the different motors when I was thinking about getting a 4v...
stock mach 1 vs full bolton cam gt
mach 1 -VS- gt from a 45 roll
MachThis04 • 26,405 views
@braddfordy I have port and polished heads
2006 GTO vs. 2000 mustang GT
just a few runs with a friend of mine.. completely worked N/A new edge GT
2000 mustang GT
lt cai
accufab tb and plenum
steeda underdrive pullies
s...
bharsen • 72,836 views
lol wrong, cammed 2v with full bolt ons run anywhere from 11.9 to mid 12s, and you can go look at andersonfordmotorsports for the 11.97 run on a NA 2000 gt. i raced a 6.0 when my car only had underdrive pullies, cold air, and offroad xpipe and yea i lost but it wasnt like he just ran off and left...
Cammed Ford Mustang GT 4.6
2004 4.6 Mustang GT, Built Engine, Patriot Stage II Heads, Comp Cams XE278AH, BBK Longtube Headers, BBK H-Pipe with Cats, Welded in Flowmaster 40s ...
mdltrn • 95,637 views
i think its funny how you are talkin shit on ford, first off its a 4.6 not a 5.7 so yea its not gonna make as much power duh, but somehow mustangs still manage to beat camaros and all those cars a lot. its not all about horsepower when it comes to racing, if you really knew somethin about cars yo...
there is lash adjusters/hydrolic lifters, rocker arms, valvesprings, retainers, and keepers in the valetrain.