1sik3297's channel

A npi geard car vs a stock auto pi the npi is pretty much car for car this vid shows it they are pretty close in power marks to the wheel..npi 5 speed bone stock should be around 200 even.. a pi auto is right around 210 to the wheel on average.. do to the power loss percentage on paper 20% of los...

Sick kill but yeah power is a bit low for those mods. Buddy put down 220 stock in his auto 02. And my buddy with a 95 tbird with npi heads and pi intake put down 205 with throttle body plenum and a canned tune. Put down 385 with a 150 shot of spray.

hard shifting trans can hear the tires scratch third... nice love it mods?

time for j-mod

@igotyourpinx dont forget the crank is different and the cams are different from the cobra...if it wasnt for the mark viii the cobra wouldnt have had the 32v in it or if it did it wouldnt have been as powerful as it was....

@MrHotrodlincoln oh well an other person that looks at the gross vehicle weight on the door and not the curb weight..

i actually thought it was going to sound worse than that i kinda like how they sound like that throaty but not raspy like you put on a flowbastard

ok i understand the conditions that took place here but arent those numbers a bit low for the the pi swap..i mean i can see the npi with those number with the tune...but pi with that low...i thought easy 320 on all runs...guess high altitude and temp do make that big of difference than down here ...

gotta love those bigger inlet blowers...

pure sex....thats all im saying...

@sundayfunday563 explain falling out of gear? meaning is it not holding a certain gear?is it sliping raising rpm and not picking up speed? what?? if these are any of your cases your trans is done for dont touch it leave it alone unless you want to have it rebuilt....the j-mod simply allows for mo...

traction control is killing it too...it being activated its going to be activated the whole time...some times more severe...turn it off and run again...itll be a bit quicker...

im a ford guy ill be one to say ludes pull pretty good in there vtecs,im having problems believing the stang is a 5 speed though...i dont see any drop off from the front end the whole time..if only if it is a. auto i know where the problem started at the launch.. stang starts to spin and the car ...

mach1 chin?

ok true ford guy here....come the hell on now chevy put those in 4x4 and the front tires will spin and not allow it to move as well...total b.s put the dodge in 4x2 as well itll climb the ramp no prob too...

i wanna post here before some idiot goes and says well it wouldnt been able to do it if the rig wasnt helping as well before that take a look at the stacks on the rig no smoke or anything indicating the throttle was being touched.....

love all the haters...Obviously they never driven a rwd car....for the fact that a gear swap is night and day difference matted with a tune easily a half sec gain in the 1/4 if the driver can drive...not saying his car is a mid 13 sec car it might be but all you gotta rememer is that those are pe...

@Mach1girl6 damn im not gunna lie but ur most likely a better driver than i am and i like to thing im pretty damn good not the best but good..

for some people its extremely hard others it comes to them instantly...i tought myself in my back yard going back and forth on my basketball court in a 67 mustang straight 6 3 speed...then the first time on the road in my sisters 99 v6 mustang 5 speed at 14 yrs old...she was still learning to dri...

@BostonMacK74 its not the guys that do it right that piss a lot of us off its the guys in these cars that go from a single cam to like an ls swap... that think they are badass and think since hes a dual cam now he can beat anything when plain and simple cant even keep up with my grandmas v8 thund...

@svtlincoln It might be ur elevation because im at like 500ft above sea level and bone stock mine ran a 9.7 at 72 and then with a wider tire i dropped to consistant 9.5s 9.6s and with the 3k stall i dropped to 9.4s.i never got to go with the 4.10s but that car was a freak.look up stayunique91 on ...

@marshallstrat1 idk if stayunique got back to you or not on this question but there is no clearance issue do to that he has the 96-97 hood and he is actually running nitrous with a 3/4in plate kit that is under the throttle body and plenum and still has clearance but barely...

@bigtom388 so what about these honda guys or other import guys that laugh when you just ask them against a car that you or non of the ricer community would ever think would be out on the dragstrip or wanna run.i think its funny when my buddy asks people if they want to run his tbird and they just...

ok now this was done right i like the fact it was done right and looks fucking clean as hell...im not into hondas or imports but everyone likes what they like... even though you werent the one who built it... but at least you went out and got one that was done right...Respect to you...i give resp...

@MrHotrodlincoln after i got my gears done on my mark.. new edge gts couldnt touch me that didnt have mod for mod i was holding my own to stock s197's from a roll it be even dig they couldnt hold on to my launch.

i was going to say a ass load of bolt ons on that gt nice 2v man..gears?

one hell of a drivers race no?

Taking a wild guess here did you check the chain tensioners and guides? or have them replaced? sounds like what my mark did on cold startups then when oil got to it it went anyway, but thats not happening here. i heard that the tensioners and guides like to get sloppy and make noise. Sounds loude...

it looks like mater from cars...

sounds like someones bearings are going out lol jk thats sick as hell....what blower is that???

@stayunique91 dude i didnt even have the supercoupe suspension yet lol so just the 17s at the time and the muffler delete and x-pipe

i bow to thee......great stuff i know this thng is super old but damn...again i bow to thee...

@hdsfer noooooooooooo not in the foxs....crappy drivablity IMHO go 3.73s ive always felt the 3.73s in a stick car and 4.10s in an auto ive been in both a 4.10 02 gt auto and a 3.73 stick 01 gt.....loved driving both but i just think 4.10s is to short for a 5 speed..i absolutly love my 4.10s in my...

@digiam42 I just think its hilarious that its been 2 months and he still doent get the point...im sorry but its funny as hell reading his comments and every time he keeps getting schooled on the responses...