1pcfred's channel

@deadbirdsings I'm not sure what you can make out exactly with your head so far up your own asshole. Fair chance it has nothing to do with me though.

@1isaacmusic I'm psychic

@lutherdriggers If that is the case then you just get a longer pallet. They come in many sizes you know?

@ShiftySquirrel Zero clearance inserts give you less tear out in cuts and thin cut offs don't get sucked into the saw either.

Cute cat! Porter Cable makes good tools. At some level it is more about what you prefer than quality. Because all the good brands are good. Personally I really like Bosch stuff. I have a PC jigsaw and a Bosch one, the Bosch totally blows the PC away.

@bluebird1422 I'd critique one of your videos but apparently you haven't posted any.

Isn't 3M 77 like their permanent glue? I have a can of their 45 now. I have to admit the mineral spirits stripped it right off for you. 3M also makes a product for frisket tacking or mask adhesive which is for doing fine arts air brushing. That stuff comes right off and leaves no residue. You are...

@bastard3b It could be your PWM chopper frequency that causes the noise. Slow enough to hear it. I need to put up a new video of my motor drivers since I changed my current sensing resistors.

@vince086 I think it depends how much you budget pot and beer but that guy said it cost him $400. I didn't see no $400 in parts there!

I'd have used a hole saw, then just drilled up the middle hole. But when all you have is a hammer everything looks just like a nail I guess ...

@bastard3b $2 well my entire Z axis is shaping up to cost about $50

All I could think of while watching the video was to make it really effective protection he should cut a vision port into the basket. I guess he just didn't want to ruin a perfectly good basket for a joke video though.

@Knispel1963 People who hit the dislike button this video were just confused.

@Bozohotep If you wish to remain ignorant then be my guest. I prefer being informed.

@Norbury53 That's how I'm going to make my fortune. I hear a lot of Mayans are going to be calendar shopping this year!

Pretty good. I wonder if the motor on your lathe can be reversed? Sometimes manufacturers don't bring all the terminals out. Cheap bums, all it saves them is one screw. All tool motors can be reversed, just how they're made it isn't practical with some of them. Anyhow not too sure about your fini...

Can we have a video without the music and just listen to the motor please?

@llnetbeast The Internet sure is chock full of idiots isn't it? I've no doubt those folks all have problems. I'm also certain they are the cause of their own problems too! TB6560s are pretty complicated pieces of hardware. Some folks understand them, some get lucky, the rest just whine a lot.

@Buzzsawman I got a fever, and the only prescription is more cowbell!

@Grizvwald No tool battery works for 20 years. It is beyond our technical ability for humans to create such a device today. I've plenty of perfectly good drills with dead batteries now. That and in 20 years I won't be using tools anymore. Even if I was there will be much better tools by then anyw...

@Yevilyn Then don't be rude. You haven't upset me. Hear what people say, not what you want to hear. Most of my property is untouched wilderness. Heck I haven't even been to some places in it. Plenty of people farm around me but they have a lot more acreage than I have. No one on my block farms, a...

@Diluted99 You ask for too much.