1kreature
Loading...
174
subscribers
1,009,624
video views
Uploaded videos
1-10 of 95-
Homemade cyclonic dust seperator
1kreature
67 views
First attempts. Using an old jellybean box and a 1.5l sodabottle.
A tad larger scale is needed for the cnc ofcource, but this definately works.
-
Homemade cnc - measuring level of some scrap mdf
1kreature
43 views
The testcut gace varying widths along the mdf and I wondered if the heigh were changing that much. Turns out the mdf I found has water-damage so it really is thicker in one...
-
Petter jogger litt
1kreature
41 views
Endelig fikk jeg filmet ham!
Han har en tendens til å stoppe og kose hvis han ser jeg filmer ham, men nå fikk jeg endelig noen halvslappe løpeturer på film!
-
Low-cost CNC gantry bearings almost done
1kreature
160 views
The new solution for the gantry-bearings uses 15x15x2mm alu angle-profileas rail with skateboard bearings (608ZZ) on a 20x20x2mm alu angle-profile and 40x40x3mm alu angle-p...
-
Ghost v2 standstill in snow
1kreature
83 views
Just to show the propwash when running 30k rpm in the snow.
This is what allows it to actually run in snow if given a running start.
And yes, we are nuts in Norway.
-
Ghost v2 in the snow!
1kreature
58 views
Old video of my scratchbuilt rigger running in snow!
By increasing the prop a bit I was able to gte enough grip in fresh snow to run it as long as I gave it a little push ...
-
Ghost v2
1kreature
45 views
Old video of my scratchbuilt rigger.
It uses a tripple-stack cdrom motor running only 90w. The motor is integrated in the driveshaft assy and 4 bearings support the shaft ...
-
Simple IR range-finder
1kreature
50 views
Old video of a range-finder test I did.
The principle is to read the incoming ir and strobe a IR emitting led to compare the background IR to the added IR cancelling out e...
-
Electroless copper plating
1kreature
180 views
Due to the high concentration of dissolved copper in the used etchant it deposits copper on any conductive surface.
The solution is sodium persulfate dissolved in water,...
-
Vertical landing
1kreature
50 views
Vertical landing in headwind with flying wing.
Advertisement
About 1kreature
more
less
Play all(95)