1castingcowboy's channel
Loading...
-
1 month ago
Home Shop Foundry - Melting Scrap Copper
Everyone melts aluminum! But melting copper is a little more special. During this casting session, you get to see what happens to scrap copper (a...
1castingcowboy
liked
-
1 month ago
Easy CNC Machinery Moving: Reach right in!
Over the years, I've tried a lot of the DIY techniques for moving a big machine, including pushing along on rollers, prying with steel bars, liftin...
-
1 month ago
Foundry101.com
Making a greensand mold and pouring molten aluminum.
A quick tour with sample castings. Shake-out, breaking apart the mold.
Note: Gating system s...
1castingcowboy
uploaded
-
1 month ago
1castingcowboy
commented:
-
-
2 months ago
Bronze Pour, Sand Casting at Home
www.foundry101.com
Lost & Foundry pouring bronze medallions for the centenial trail in Spokane, Wa.
Phosphorus copper shot added to increase fluid...
1castingcowboy
uploaded
-
2 months ago
1castingcowboy
commented:
@swordfish020 We made them. Simple, easy and inexpensive!
-
-
4 months ago
badran ghosn .black mask bronze age.AVI
this is unseen in any museum,it is 53cm black bronze or hipatizon. it is early phoenician.bronze age
badran ghosn collection lebanon.
1castingcowboy
liked
-
6 months ago
Greensand Ingot Mold
foundry101.com
How easy is it to make an ingot mold?
You can place a logo or symbol loosely on your wood pattern to create a unique ingot. You can...
1castingcowboy
uploaded
-
6 months ago
1castingcowboy
commented:
@1990suzuki We get them from a company in Canada(AP Green). We sell them on our website (lifting shank included with crucible).
-
-
7 months ago
How-To Remove a Locked Electrical Meter
I was hired to replace an old electrical service panel but the meter was locked on. This is highly dangerous and should only be done by a licensed ...
1castingcowboy
liked
-
1 year ago
Simple Bronzecasting using Makerbot prints! (Part 1)
The QC-Colab ( http://qccolab.com ) demonstrates casting bronze from makerbot prints.
A link on sandcasting: http://www.foundry101.com/n......
1castingcowboy
commented:
Shellacing the pattern will fill in the small gaps that stuck.
About 1castingcowboy's channel
@2r1f 100 lbs sand, 1 gallon water and 12 lbs bentonite, about 6%? We torch the sand if it is too wet. Use a hand torch where the metal will flow in the mold, before you close it.