1983cr125

beautiful bike man i have a 73 rd350 im working on

smoktire.so a lil over 60km alright thanks u no any thing to do to get a little more power?

were are u located im after a front fender and a # plate for the front..i to had i think it was a 77 or 78 rm250 only payed 50 bucks for it guy put striagh gas in it and though the enigne was completely toast but when u dont have oil in the gas it only wrecks the piston.i just pulled my rm400 in...

hey i never ended up getten that rd350 engine fo rmy ninja250 never goes thru but i found a ninja 250 enigne with 3000 miles i put in it and its coming back out now i have a 1979 suzuki rm400 2 stroke dirt biek engine to go in it should fly top speed stock gearing is 155km thats with the dirt bie...

i have a 1979 rm400 i put a 2001 honda xr100 brak epeddle on it works great

nice biek man i have a 79 rm400 im redoen just needs wheel bearing in the rear n rear shocks ithere then that mint its bored out not sure how much over but cant wait till it needs rings again so i can over size the piston liek crazy and do my jetting.my budy has a cr480 with a longer conecting ro...

are the other bikes 82 yz250s i have one bored liek 60 over ported different reeds and filter modified silencer it rips but i blew a piston wrist pin clip i also have a 79 rm400

i had a 38mm mikuni i think flat side carb like yurs on my 83 rm250.i now have a 79 rm400 but it has a mikuni carb but not a flat side.i wanna switch up what mm carb is that and is it stock if it is stiock do u thik it can just bolt it on and not have to change my jetting?

just piston rings u do every year or full rebuild of the crank ect??i just got a 1979 rm400 runs good new top end over sized piston i think only first over .cant wait to get itt o the strip

nice biek man i have a 79 rm400 with a 78 engine im gunna repaint the frame get some new plastics i have a pair of renthal bars for it now seat needs swing arm bearings and rear wheel bearing.what did u pay for yur exhaust mines in good shape but stock

yea nice biek man seen yur oth vids on the rms i had a 1978 rm250 i currently have a 1979 rm400 witch isnt goen any where luv it.also had a 1982 rm250 last summmer witch was mint love the old 2 strokes

i have a 1979 rm400 all plastics are goos besside front fenders a lil cracked has new renthal bars on it new leather seat stock everyhting.my budy also has a 81 cr450r and a 1982 cr480 and a can am 500 1985 model nice bikes

nice biek man i just got a 1979 rm400 with a 78 engine cant wait to bore it out n port it a lil and get a different reeds for it n change up my jets.my other budy has a cr480 with a longer conecting rode and a 1 inch adapter plate under the cylender plus its bored racing reeds.bent my work boots...

a 4 stroke engine has way more parts when it breaks its way more expensive to fix there also alot harder to work on.a 2 strokee ngine has no valves timing chains timing chain tensioners or cams in them or timing chain sprockets.witch makes it alot more reliable and cheaper to fix 2 strokee gnines...

hey just picked up a 82 dt125 lc runs good put looking for more power i also have a carb for a 82 yz250 think it will work?

that sux man i was just about to park my dt125 2 stroke enduro my sis wanted me to do a rolling burn out i lyed off the front brake a lil just to keeop it rolling then it hooked n flu 15 feet up the road into some ones drive way good thing there was no cars.i have a ninja 250 97 with 07 engine i...

is it bored over any i have a nice 82 dt125 that im in the process of putting on the road i wanted to shave my head and go 60 over with a wiseco do my jets and rebuild the crank if it needs it.what else can i do for more power is buyen a exhauste any good or do i clear out mine??make it a straigh...

i have a 82 it has 16 this is newer it only has 14 dumb that they dropped down

if thats a 4 stroke then no it wouldnt i have a 82 yz250 with uni air filter differnt jets racing reeds wiseco piston bored 80 over things insane

actualty its not a cross bike i have a 82 dt125 im putting on the road and a 07 ninja250 im sellen.a mx125 2 stroke has 28 hp my dt only has 16.what do u pay for insurance im not working and just rebuildnt my ninja to sell it n pay insurance so i can drive my enduro this year?

i have a 1982 dt125 near mint shape just got it 2 days ago.stock hp on my 82 is 17hp stock.a actual mx 125 2 stroke bike they have about 27 28 modified dt 125 can reach those #s tho with some reeds and jets and wiseco piston with a bore

i have a 82 yz250 but white mines 50 over to i just blew a wrist pin off by over revven the shit out of it iv ridden the biek hard as hell for 2 years ran it rich and always clean oil my conecting rod n bearings are still mint in my old beast but now i have to bore the thing out again also has a ...

i have a 1982 yz250 thing flys but i just blew the top end its 50mm over so im gunna go 75 its got reeds jets filter sprockets everyhting changed thing rips.new bike are no problem

yeah y108 rocks this was crazy no other wedding like it.hope u win the contest mom n dad

i just got a baja 90 n a 82 yz250 dirt biek engine im doen the swap to should be fun it looks it

what kind of engine is it the same ones that are in the 125 gio ssr125 pit bikes?cuz i have a canadian tire 90cc raptor copy quad and i was gunna get a ssr125 motor for it thats made by gio

tell me about it i have 5 4 strokes sitting out back due to valves being throwen n stuff then other thing sget damaged i luv 2 strokes.iv had a kx and yz 80 2 rm 250s.and a 1973 yamaha dt250 enduro also 2 stroke ran great lots of power it would keep up with this newer over priced 4 stroke piece ...

what r u talking about.i ride a rm250 and have owned many gios along with freinds.if u can do an oil change regularly and carbs and filters then it slast u budy has a 50cc 4 stroke quad good power reliablity is awsum had it for 5 years only done tire no valve setting or anyhting along with his 11...

holy shit man talk about abuse yea nail it up the hill but when the clutch is pulled in and yur revven it for like 5 seconds wide open that aint no good in nuetral blow yur piston.but nice climb

nic eman my first mx was a 84 kx80 great bikes 6th gear wheelies

u will get plenty more years out of it to come budy has a 50cc gio bweat the crap out of it for years its now 5 still runs great only money spent was on tires and oil

hey man is a big wheel 80 liek the size of a 125??i have a rebuildt 85 yz80 all bored but buddy went crazy as soon as he rebuildt it over revved the crap out of it n blew the piston so i have to redo the top bottems great.but i was gunna pick up a 94 yz125 frame for 100.n put the 80 in there.

hey man i talked to u before n i went n got that one pe175 ither a 78 0r 79 bulled the head just tro check it out what gear will it wheelie in with its own power?havent had the chance to ride mine

iv found that the for strokes to me suck my budy had a brand new raptor 350 250 hours on it and was in the shop and cost him a arm and a leg not to menchen if u throw a timing chain or osmthen u can fuck a valve bend a valve screw yur came.i run a lil rich on my 2 stroke all the time and just rid...

the 140 bolted right in??i have a gio 125 pit bike.had it 2 days and bent the frame all cuz rop was tyed around th eback of the bike n it got caugh in the tire and pulled the bar under my seat down im getten it fixed i usualy ride a rm250 but these r fun

what does it weigh?woould a single cylender snowmobile engine stock 22 hp be good in a ninja 250 u think?just for around the city

alright sweet man thanx for letten me know.i have a 97 with a blowen engine n wanted to put a 440 or somthen in it.though it would be real neet and suprise alot of people specialy when i pull up beside um n it sounds liek a 2 smoker:)