123jgbc
Loading...
Geek Group CNC #9 - Cutter Comp
Rick takes Chris through the basics of cutter compensation.
123jgbc
commented:
Power UP! Okuma lathe HO!
I created this video with the YouTube Video Editor (http://www.youtube.com/editor
123jgbc
commented:
Hey guy thanks for making this video. I've been waiting for it. I hope you make more.
Power UP! Okuma lathe HO!
I created this video with the YouTube Video Editor (http://www.youtube.com/editor
Why is Michael Growing Slowly? Plus Fluctuations + More!
Please "Like" Our FaceBook Fan Page and Post Your Questions To The Wall!
http://www.facebook.com/ilo...
If It Gets 3 Or More "Lik...
123jgbc
commented:
Hello GTG. I'm watching these videos. Personally, I like the results Michale is getting, I think they are realistc. Now, I'm 50 years old, can this program work for me? I'm 5,10 and I would like to grow another inch if possible.
thanks GTG
What is Heat Treatment?
Quenching, Hardening, Tempering, Anealing, Decarburization, Differential Tempering, Normalizing, Martensite, Troostite... what the hell does all th...
123jgbc
commented:
Whats up with that music???
Geek Group CNC #8 - Cutting a Radius
Rick takes Chris through the fundamentals of cutting a radius for a part on a Haas CNC machine.
123jgbc
commented:
Man!! thanks soooo much. Keep them coming please.
Tesla Coils with Trevor #3 -- Making the Base Part 1
Chris and Trevor take their project to the machine shop, where Moose helps them get started on making the coil's base.
123jgbc
commented:
That was really good. Can you guys make more of those CNC videos?
thanks.
P-FET Reverse Voltage Polarity Protection Tutorial
Different ways you can protect your circuit from backwards power connections. Diodes, schottky diodes and P channel MOSFETs.
123jgbc
commented:
Hello, I like to learn this subject. However, all you guys posting videos have your videos all over the place!.How is one suposed to follow any sord of logical siquence? to learn the subject.
Could you number them of explain what follows what?
I really appreciate your effort, but this is crazy ...
Hardinge 1C Eccentric Tool Holder and Collet Kit
Hardinge designed an eccentric tool holder to eliminate tool breakage from misalignment. The Hardinge 1C Eccentric Tool Holder Collet Kit provides ...
MACHINE SHOP TIPS #77 Cutting a Dovetail on Bridgeport Mill Part 2 of 2 tubalcain
Tubalcain shows how to mill a female dovetail. Project---A thread cutting stop for the 9" South bend lathe. Part 2 of 2
123jgbc
commented:
great video, thanks.
Haas Control — GUI Setup, Run, and Edit
In this video, John Nelson guides us through the Setup, Operation, and Edit modes of the latest graphical user interface of the Haas control.
123jgbc
liked
Arduino Processor Basics
Dan and Paul are with us today to show us the basic setups and workings of several different models of arduino processors.
123jgbc
commented:
Thanks for this video. What is the Arduino Processor used for?
MACHINE SHOP TIPS #36 Part 2 Parting on the Lathe tubalcain
Tubalcain shows how to cut off stock on the Atlas & Clausing lathes. Part 2 of 4.
123jgbc
liked
Geek Group CNC #7 - Threading Basics
Rick takes us through turning and threading copper rods that The Geek Group will use as interfaces on the two new impulse generators it's building....
123jgbc
commented:
This the best CNC video so far thanks.
Geek Group CNC #7 - Threading Basics
Rick takes us through turning and threading copper rods that The Geek Group will use as interfaces on the two new impulse generators it's building....
123jgbc
liked
How To Grow Taller - Day 14 of Michael's Transformation
For the Next 2-3 months (60-90 days) Lance Will be Personally Training "Michael" from Singapore. Lance Will be putting Michael through an Intense G...
123jgbc
commented:
Hello guys. So, how much taller is he now. Last I saw he has grown about 1/2 a centemiter,
not but for two week!
Can you tell the end results?
thanks.
Gear Creation - Autodesk Inventor 2011
Autodesk Inventor 2011 makes use of design accelerators that allow you to focus on your design rather than the time consuming task of manually gene...
123jgbc
commented:
If the Idea was to teach us something?
You didn't.
CNC milling programming step by step
step by step cnc programming with drawing. Programming and simulation software EXSL (www.slhome.com).
123jgbc
commented:
This video is really stupid!! Can't see anything and no explaining of any of the steps?
CNC Milling Machine Training Part 7-2 - Atrump Machinery Inc..wmv
www.atrump.com ; E-mail: atrump@atrump.com
123jgbc
commented:
Hey, I've watched this video many times already, it is a great intro to CNC machining.
Thanks for it, and I'll consider a Centroid if I ever by a CNC for Milling.
MACHINE SHOP TIPS #70 Atlas Lathe Attachment Part 3 of 3 tubalcain
MACHINE SHOP TIPS #70 Atlas Lathe Milling Attachment Part 3 of 3 tubalcain
123jgbc
commented:
Hello, I can't find any more of your videos pass # 71 or around that I think.
What is your numbers sequence?
Thanks again for these videos.
MACHINE SHOP TIPS #67 Lathe Project Pulley Part 3 of 3 tubalcain
Tubalcain shows how to turn a V-Pulley on the Clausing lathe.
Part 3 of 3.
SUBSCRIBE TO MY CHANNEL!
123jgbc
commented:
Thanks for the video sir. I'm one of those people who knows next to nothing about machining, so I appreciate you explaining every little detail.
All I Ever Wanted (Bombastic Video)
Music video by The Airborne Toxic Event performing All I Ever Wanted. (C) 2011 The Island Def Jam Music Group
123jgbc
commented:
WOW! I have never hear or seen this song before. that was really good.
I have u on my desktop now.
thanks.
-
5 months ago
123jgbc
liked
MasterCam X3 Tutorial Part 4
MasterCam X3 Tutorial Part 4, Milling the bottom step.
123jgbc
commented:
Man, this video is really cool. But without knowing what you're doing and not being able to see what you're cklicking on, it get confusing and hard to follow. It'be nice if you explained first and not as you go.
thanks
MasterCam X3 Tutorial part 2
MasterCam X3 Tutorial Part 2 Adding holes to fixture.
123jgbc
commented:
Can you please send me some info about your school. I would like to learn MasterCam.
thanks.
Call to Action: Help Us Recover Stolen Property
Good friends of The Geek Group, Kris and Adam, had the experience of Kris's iPad 2 being stolen from their apartment. Anyone who can help recover i...
123jgbc
commented:
OH maan. So sorry to hear this, I hope you find it and him or her!
MACHINE SHOP TIPS #65 Lathe Project Pulley Part 1 of 3 tubalcain
Tubalcain shows how to turn a V-Pulley on the Clausing lathe.
Part 1 of 3.
SUBSCRIBE TO MY CHANNEL!
123jgbc
liked
MERRY CHRISTMAS EVERYONE!
Thank you so much for putting up with my absence. I love you guys! Have a Merry Christmas, an amazing Hanukkah, and enjoy!
Leave comments or quest...
123jgbc
liked
Geek Group CNC #1 - TM-1 Button Tour
Chris takes us through a basic overview of the control panel of our TM-1 milling machine, and relates the function of the buttons along the way.
123jgbc
liked
How to Read an Inch Micrometer.wmv
For ManufacturingET.org
A micrometer is used to make precise measurements. This video describes how to read a micrometer that is calibrated to rea...
123jgbc
commented:
Hello, do you have more CNC tutorials??
I'm trying to learn how to program.
thanks.
cadjunkie SolidWorks, Beginner 09
123jgbc
commented:
Hello. I'm trying to follow your tutorial # 09, buy my solidworks doesn't put the fillets on the last part of the tutorial. How is your Extrude Boss/Base is set? does it have a thickness?
thanks.
Geek Group CNC #4 - Making Keys for a Parlec PWS 6900 Milling Vise
Chris and Rick go through the process of making custom fitted keys for the vice that will be mounted to our TM-1 mill.
G-CODE:
%
O00001
N2
M06 ...
123jgbc
commented:
Chis, is true that anybody can show up at your place and learn how to operate the Haaz Mill and Lathe??
-
5 months ago
123jgbc
liked
Happy Holidays From Geek Group 2011 #2: We Three Kings
Merry Christmas from The Geek Group!
We Three Kings.
Rendered in four part harmony from a single solid state Tesla coil. All the sound heard is b...
123jgbc
commented:
Thanks Geek Group.
Tesla Coils With Trevor #5 - Making the Base Part 3
Chris and Trevor continue constructing the coils base, with lessons in drilling and tapping plastic.
Back to school supplies haul (Parody)
Hello beautiful people!
Facebook: http://www.facebook.com/pag...
Twitter: http://twitter.com/#!/Barba...
Thi...
123jgbc
commented:
Barbara. You are a trip!
chao
Oh, I will do whatever paper says,,,, one of these days.
Autodesk Inventor - Fundamentals of Workplanes
Autodesk Technical Evangelist Rob Cohee steps back for a few minutes to talk about a few fundamentals of of workplanes. Work geometry is as importa...
123jgbc
commented:
You created that tangent work plane so fast I can't trace your cursor movement.
Ok, had enough. Can't keep up with this guy. thanks anyway.
Autodesk Inventor 2012 Basics Mini-Course Part 2
Autodesk Inventor 2012 Mini-Course Part 2. Learn more about the interface, the heads-up display, and how to start creating a sketch. To learn more ...
123jgbc
commented:
Thanks!!!
Haas Training TM-1 Power On
How to power cycle a Haas TM-1 Milling Machine. For more CNC Instructional videos please visit www.thegeekgroup.org
123jgbc
commented:
Hello, Do you have any more training videos on CNC Programming and Setting?
Autodesk Inventor Fundamentals - Basics of Part Modeling Chapter 3
In this video series, Autodesk Technical Evangelist Rob Cohee introduces new users to Autodesk Inventor. Making the Most of Your 30 Day Trial is ta...
123jgbc
commented:
Man, without that menu on the side of the screen, I can't follow the rest of your tutorial.
If you don't show us how to get up there, I may have to go back to learining SolidWorks. And really don't want to do that, those people are a punch of assholes.
Anyway, thanks for tutor anyway.
by.
Autodesk Inventor Fundamentals - Basics of Part Modeling Chapter 1
In this video series, Autodesk Technical Evangelist Rob Cohee introduces new users to Autodesk Inventor. Making the Most of Your 30 Day Trial is ta...
123jgbc
commented:
How do I get the drop down manu on the left side of your screen?
The one with the model axis?
C Programming Tutorial - 1 - Hello World
Part 2 - http://www.youtube.com/watc...
How to download compiler - http://www.youtube.com/watc...
Introduction to C progr...
123jgbc
commented:
Your program doesn't work.
I'm failing to find what is so good about these you tube tutorials.
most of them suck and you can't get their programs to run..
So, I don't get how some of you are so happy with all these crap.
Great video. Guys can you setup the camera where Rick can show us the control panel moves?
thanks so much.