0PSTNS
Loading...
DSCN1699[1].AVI
Dyno'ed and mostly built @ Speed1 in PA. Car made 336rwhp and 254ft/lbs on wastegate - 9lbs. Breaking in and looking for 400+ on high boost
0PSTNS
uploaded
2gslse's turbo 13B-RE FB.AVI
Dyno'ed and mostly built @ Speed1 in PA. Car made 336rwhp and 254ft/lbs on wastegate - 9lbs. Breaking in and looking for 400+ on high boost
0PSTNS
uploaded
0-something getting on the highway pull.AVI
in car 0-something.... top of 2nd is 57mph.
0PSTNS
uploaded
TitaniumTT's 329 RWHP run
4th gear pull @ KDR. 7500 rpm's, 9lbs of boost, 329 RWHP. Ported 13B-RE with stock REW sequentials
0PSTNS
commented:
-
2 years ago
0PSTNS
favorited
Leaving KDR after a 400+RWHP dyno session
Watch for it twice First @ 4;50 and again @ 8:45....... whoops. Need to drive around with the trim switch turned down to Spring Pressure + creep
0PSTNS
commented:
It's an AIM Strada digital dash. There's no way to get that shift light without getting the whole dash as it's integrated.
TitaniumTT's 400RWHP dyno run!!
KDR in New Tripoli PA is pretty much home to this 1988 Mazda RX7. Housing a swapped 13B-RE ported engine spooling STOCK 13B-REW turbo's this is th...
0PSTNS
commented:
Greedy's expensive one. RS maybe?
TitaniumTT's FCSCC AutoX run 11/8/09
TitaniumTT's FCSCC AutoX run 11/8/09. 13b-RE 400rwhp Rx-7.
0PSTNS
favorited
RX8 chasing RX7
this is when RX8 chased down the RX7...LOL
0PSTNS
commented:
This is probably my favorite FD of all time. SO CLEAN! Awesome ride Sinned!
RX7 chasing RX8
the RX7 (FC) has 405 to the wheels and turbo red RX8 is 300whp with stock RX8 with upgraded tires and "crazy driver upgrade".....love how RX8 handl...
0PSTNS
favorited
RX7 chasing RX8
the RX7 (FC) has 405 to the wheels and turbo red RX8 is 300whp with stock RX8 with upgraded tires and "crazy driver upgrade".....love how RX8 handl...
0PSTNS
commented:
FC has no PS at all and quickest ratio available - 15.2:1. With no traction control, 14lbs of boost, 405rwhp gets away fast, @ 2:39 I got loose in 2nd @ only 10lbs, so no I wasn't pushing it as hard as I could have or the 8 guys were, I was impressed with the 8's in the corners. If anything it b...
Leaving KDR after a 400+RWHP dyno session
Watch for it twice First @ 4;50 and again @ 8:45....... whoops. Need to drive around with the trim switch turned down to Spring Pressure + creep
0PSTNS
uploaded
TitaniumTT's 400RWHP dyno run!!
KDR in New Tripoli PA is pretty much home to this 1988 Mazda RX7. Housing a swapped 13B-RE ported engine spooling STOCK 13B-REW turbo's this is th...
0PSTNS
uploaded
I built a custom exhaust using a 3" in 2x 2.5" out MagnaFlow and 2 2.5" in/out Magnaflow cans