MAKING a S10 CONVERTIBLE 4X4 BLAZER
Took a 1989 Jimmy 4x4 S10 blazer and cut the full roof off it.,lifted it 3.5 ,31 tires,trimmed the fenders,blitz black paint job,with some urban c...
drewme1010 • 16,220 views
SUPERCHARGED BLAZER AT CECIL COUNTY DRAGWAY RUN 1
88 blazer with 350 b&m supercharger w/8lbs of boost 700r4 trans (still has transfer case on it) stock suspension with 4:11 gears
flatoutracers • 2,775 views
3.73 would be perfect
1993 s10 blazer
Cruising while taking a video of my friends sexy blazer
cubanplaya08 • 8,072 views
nice and clean
WALK AROUND ---- My Pro Street v8 S10/(S-15 grill) --- WITH SLIDE SHOW
FOR THE FOOLS COMMENTING HOW IM TALKING.. Firstly that wasn't my "ole lady" secondly i wasn't yelling, couldn't hear me inside the cab with truck ...
irishkendoll • 73,794 views
bad ass truck
Southern Style S10 Blazer v8
Just a little clip of me bout to put the chevy on the highway for a 900 mile trip. SOUNDS GOOD!!!
blazaboy86 • 11,943 views
cleanest blazer ever
s10 blazer part 8 2010-06-30 001.MPG
my new motor ran 12.8 built for nitrous working on that set up now motors is dialed in 100 to 150 shot looking for mid 11s
jabellikka • 679 views
when u drop a v8 in these trucks do u use the same motor mounts as the 4.3?
Turbo beretta runs 13.1
My turbocharged 3100 beretta runnig 13.1 at norwalk raceway.
jbrogan2007 • 529 views
did u build this setup? what turbo r u using?
me and Happy on Newport Blvd filmed in Belt-cam-o-vision
Me and Happy went to get some smokes. we're doing approx 45mph+ on Newport Blvd, hangin' with traffic. happy's eyes were watering,he said it was f...
bairdco • 277 views
once again amazing........i should hav mine thurs...waiting on slow ass ups lol
Motorbicyclingdotcom I ride my Bicycle
Stop by Motorbicycling.com Everything you need to know about Motorized Bicycles in one place Building, Maintenance, Performance, Diy, Photos, Video...
motorbicyclingcom • 7,702 views
nice vid horrible song
How to Build a Motorized Bicycle - Part 1
Be sure to watch Part 2 http://www.youtube.com/watc... and Part 3 http://www.youtube.com/watc...
Would you like to get 120...
panofish • 107,359 views
well done awsome vids but i hope i dont hav to go through as much as u......lol. we will see next week when my kit arrives
Motorized Bicycle (Cranbrook Cruiser)
Bike purchased at wal mart, 80cc engine from ebay. Approx total cost $190.
MichealDarwin • 1,882 views
nice bike along with the song
POP'S MOTORBIKE
Motorized bike build on Trek Cruiser Classic aluminum frame. Top speed 35 MPH.
casemeister2008 • 144 views
nice bike. where did u get that hub sprocket
Steve Reichert: Home built motorized four stroke bicycle overview
This is my uncle Steve giving an overview of his motorized bicycle. He go's through many of the details of the bike as well as a little performance...
JRRacing64 • 7,254 views
job well done.............
getting beer is uphill all the way.
this is me and Happy going to get beer on the 4th of july in Newport Beach. went to the 7-11 on Superior and 17th, so i had to go up a hill that's ...
bairdco • 521 views
roughly how fast was that......looks like u was flyin
SCSW Full Suspension Motored Bicycle in Action!
Here's the production bike working that suspension on the trails.
Order yours today!
(408) 279-2307
EZRider063 • 22,249 views
very nice guys mines on the way.............
huntersville nc 2006
the keydown
wingnutcigarettepile • 7,662 views
what yall doin down dere..........rev limiters.........meet me on woodward.....DET, MI
003.AVI
Honda Elite 50 bogging down when throttling up
rpkenealy • 41 views
jus cleaned my carb today. it ran a little better but still bogged around 35 mph. idk what im gonna try next....lol maybe a big bore kit and new carb or at least re-jet the stocker
STOCK 50CC SCOOTER CARB CLEANING #2
cleaning the 14mm stock 50cc scooter , moped carb to make it run better
DIOSpeedDemon • 74,508 views
hello dio i hav a quick ? for u ....i hav a 1998 elite 50 only about 2200 miles on it original owner never abused. last summer i fired it up and she ran well until it got towards tops speed then she bogged down on me any idea? everything is original but the plug
Servo tester + electric scooter throttle
Wired a hall effect throttle to a microcontroller-based servo tester. Works as expected.
This will be the throttle for my e-bike.
oofnik1 • 2,084 views
how did u wire the throttle to the servo tester?
Servo tester + electric scooter throttle
Wired a hall effect throttle to a microcontroller-based servo tester. Works as expected.
This will be the throttle for my e-bike.
oofnik1 • 2,084 views
Electric Bike - road test
90% Done. All that's left is the need to secure the motor mounts slightly better, and build a proper battery mounting system.
Peak power is 3kW ele...
oofnik1 • 1,793 views
Magura Throttle Deadspot Elimination Video.wmv
Magura Throttles when connected to a Fechter Throttle interface have ~15% dead spot
at the low end point of throttle movement, to rectify this the ...
AussieJester69 • 791 views
how did u hook up the throttle to the speed controller
Magura Throttle Deadspot Elimination Video.wmv
Magura Throttles when connected to a Fechter Throttle interface have ~15% dead spot
at the low end point of throttle movement, to rectify this the ...
AussieJester69 • 791 views
High powered electric KMX trike E-bike
This is a 12,500 watt twin motored, brushless, lipo KMX Typhoon. It runs 45mph (gearing limited) and, on fresh pavement, will go 0 to 40 in 3.5 sec...
crazycrutch • 14,582 views
how many volts r u running?
Extremely high power E-bike tadpole trike
Here is my latest E-bike/tadpole trike. It is 20,000 watts (about 28hp). This video is a simple demonstration of what can be accomplished with elec...
crazycrutch • 47,069 views
how do u control the rc motors?
Extremely high power E-bike tadpole trike
Here is my latest E-bike/tadpole trike. It is 20,000 watts (about 28hp). This video is a simple demonstration of what can be accomplished with elec...
crazycrutch • 47,069 views
x 5306 144v-100amp Electric bike build
44s 4p a123 pack
modified 200v cycle analyst
144v - 100 amp brushless controller
trdfreak03 • 3,752 views
huge fan of your videos been watchin them for awhile now along with lucs and doctorbass vid as well....where r u getting those a123 cells? ebay is killing me right now $77 for jus 12 pcs. im lookin to run a 60v 10-20ah setup but prices of a123 are eatin me alive...lol Any pointers?
x 5306 144v-100amp Electric bike build
44s 4p a123 pack
modified 200v cycle analyst
144v - 100 amp brushless controller
trdfreak03 • 3,752 views
11.5@125 Turbo Duster, Return of the Junkyard on $90 stock Dodge Caravan motor.
22 pounds of boost through the bone stock Dodge Caravan 12 valve 6g72 (140crankhp stock). Fuel system fails to provide enough fuel at the top end o...
GreatDepressionRace • 3,807 views
Dyno Pull Stock 360 STS Turbo
Bone Stock 360ci engine, 13 psi 2002 Ram 466 rw 505tq
76mm single turbo.
KRCPerformance • 1,812 views
Dyno Pull Stock 360 STS Turbo
Bone Stock 360ci engine, 13 psi 2002 Ram 466 rw 505tq
76mm single turbo.
KRCPerformance • 1,812 views
well done guys.....now my turn 2002 5.9 bone stock goin with the rear mount setup
Schwinn OCC and Point Beach Cruiser Motorized Bicycles
Motorized Bicycle Schwinn OCC and Point Beach Cruiser
stealth340 • 5,457 views
what size rear sprocket should i use to gain that 24% speed lost? 36T maybe?
Schwinn OCC and Point Beach Cruiser Motorized Bicycles
Motorized Bicycle Schwinn OCC and Point Beach Cruiser
stealth340 • 5,457 views
E-Bike Fast Electric Chopper Conversion
http://www.e-bikekit.com - Schwinn Stingray Chopper electric bike conversion. Converted using the E-BikeKit.com Complete Conversion System.
EBikeKit • 108,543 views
TREMENDOUS BASS 66 - He Heard it THAT time- 30,000 watt system + New SMD SUBS
more demo's of the new woofers! This time i showed it to someone that heard the btl's compared to the new SMD's - he "heard it " this time!
meade916 • 58,370 views
pimp shit fam
Joe's Hovercraft 2009 004
Joe is a friend of ours that 3 years ago bought a set of plans to build a hovercraft. Using off the shelf parts and materials this hovercraft was ...
janerikborge • 1,966 views
where did u buy the skirt material?
Samsung a177 review
This is a review of the samsung a177 go phone. This was $99 at Radio Shack
lilchub101 • 65,995 views
while on the web can u watch youtube?
STS Rear Mount Turbo Lag Demonstration
I hope this video can bust the myth of rear mount turbo's being laggy.
Full boost @ right around 3000rpm. (yes that's right 3k!)
'95 LT1 Camaro w...
XXXXXXXXXZZXXXXXXXXX • 81,565 views
nice work.....by any chance what size is that turbo? and for all the guys out there thinking about turbo lag on rear mount kits, all u have to do is use a smaller turbo outback for a quicker spool.
99' 360 Dodge Ram Remote mount turbo
My cuz's truck that I built a remount mount turbo for.
TieRodKLL • 15,248 views
i have a 02 ram with the 360. do u think the garret t28 is enough for a rear mount setup? i have two but only wanted to use one for ease of installation
8psi turbo launch in the Z71
This was my first turbo (STS rear mount kit) o the truck and my first night at the strip with it. The truck would NLOT stay on the line with that m...
F8L • 19,874 views
nice video. did u have to upgraded fuel injectors or anything with the MAF or no? was that just a bolt on and ride/
turned out nice.......creative :-)