rliboon

Making a Guitar using GibbsCAM 2011. In cooperation with CAMSolutions. CNC routing a guitar body out of hardwood. A porter cable 892, KG2525 Servo,...

How to Install an ER 25 Collet onto the ER nut. This is very similar to other ER style spindles. The ER25 are found on some HSD or Comobo brand hig...

CNC machine cutting thought extruded plastic. Porter Cable 892, 2" straight cutting bit at .500" diameter. 23,000 rpm, K2CNC KT2514 2011, servo dri...

1/4 endmill is used to cut off the remains of unwanted casting off of grills made of steel. cutting Feed is 20 IPM. We used a Sherline head 1/2 hp ...

Cutting lines into 6061 aluminum with a 1/16th bit 2 flute carbide endmil. 12 ipm to 31 ipm. Using specially designed collet for the porter cable 8...

Steel rule die cutting of plywood. Using a special bit to cut through the .375" Thick material. The machine used 2 passes for each profile to ensur...

Cue shaft cutting with a K2CNC machine. Used with Sherline Lathe with K2 Extended way for the tailstock. Porter Cable Router 892 was used with prec...

Demo of K2 CNC router cutting coroplast sign material. 80 IPM with .125" bit at 18,000 rpm with HSD spindle.

This is a CNC machine designed for the pool cue makers. This machine travels 40"x14" x 5" Z. The maching is a prooven inlay machine

This is a Beta test of our new addition soon to be launched. This is a 4 head inline auto tool change cnc using Mach 3 and VisualMill 6.0 Post. The...

skardenni plasmacutting with cnc table

K2 CNC router machine used to drilll 121 holes into wood. A Porter Cable 7518 was used attaced with a .25" drill bit. Drilled 3/4 throught the mate...

K2 CNC router with HSD spindle cutting with a 1/8th bit. 13 IPM full depth of cut throught 1/8th 6061 aluminum using no coolant or mister. The K2 C...

CNC drilling alumnium .250" thick using a hand drill attached to a K2CNC rotuer. We made a custom post for the reoiling of the bit prior to drilling.

New to 2008, a jewler's saw is place in a custom made saw head by K2 CNC. Cuts 60 inches a minute with a 3D arch. The depths was 0.100 inches deep ...

Aluminum cutting with 1/8 2 flute endmill using vacuum table and one strip of double sided tape. Bridges were used with Visualmill 6/VisualCam1.0. ...

4 x the spindle output! CNC router cutting into solid birch. .75 thick. 2 rough passes and 1 finish with bridges/tabs. No Vacuum needed.

CNC router cutting a guitar body. Rough out the body for finish pass to follow.

CNC router cutting a guitar body. Rough out the body for finish pass to follow.

This is a video of a K2 CNC router cutting Birch .75 thick. 2.5D 3 Axis cutting using the new VisualMill bridge feature. The software allowed us to...

This is a video of a K2 CNC router cutting Birch .75 thick. 2.5D 3 Axis cutting using the new VisualMill bridge feature. The software allowed us to...

This is a K2 cnc router cutting wood for steel rule die. The cnc router cuts through .5 thick plywood. The cnc router uses a special tappered/strai...

K2 CNC router cutting solid brass .100 inch deep logo in 2.5D. This program uses V carving technique. The Bit used is a single side V bit of 60 deg...

This is a K2 CNC router cutting a piece of wood using a 3 Axis milling with a lathe attachment. This is a low cost method in cutting a cylindrical ...

This is a K2 CNC router cutting a guitar body. A Colombo spindle is used. The project uses roughing and finish passes. The bit cuts a depth of 1.5 ...