Successfully removed.
Sorry, an error occurred.
|
kamalbocat favorited a video
(2 days ago)
While I was studying film in Lofoten, Norway, I was DOP in seven shortfilms made by the students. I used both Red One and Canon XHA1 with SgPro ada...
more
While I was studying film in Lofoten, Norway, I was DOP in seven shortfilms made by the students. I used both Red One and Canon XHA1 with SgPro adapter. I have used steadycam for many years, and I also build several of them for my company WalKam (www.walkam.net). I'm both interested in directing and DOP, but in this showreel I only wanted to show clips from film that I have shot, and not directed as a director. I hope you enjoy. :)
Visit my homepage at www.axp.no. You can also see a film I made if you search for me at www.vimeo.com.
less
|
|
| |
|
kamalbocat subscribed to Andyax
(2 days ago)
|
|
| |
|
kamalbocat favorited a video
(2 days ago)

http://music4yourvids.co.uk There didn't seem to be much help on this subject on YouTube, so I decided to make a "How-to" video.
I just Goo...
more
http://music4yourvids.co.uk There didn't seem to be much help on this subject on YouTube, so I decided to make a "How-to" video.
I just Googled "how to make a track dolly", and some of the sites I originally used to make my track dolly no longer appear to be there.
However, Googling "track dolly skateboard wheels" turned up lots of useful sites that should help you.
DETAILS AND PARTS LIST:
Total cost of the dolly was about £80.
Total Dolly size = 2ft wide x 3ft long.
Type of pipe used for track = 32mm PVC waste pipe.
Angle alluminium width = 2in x 2in at 3mm thick. (2 x 3ft lengths)
Carriage bolts: 6 x 4in (to hold the angle aluminium to the board).
Carriage bolts: 16 x 2in (to bolt the wheels to the angle aluminium)
MAIN BOARD: 2 X sheets of 2ft X 3ft 7-PLY sheets screwed together with 30mm self-tapping screws.
Skateboard wheel spacers x 16
skateboard wheels x 16. Dia: 50mm (52mm are also ok)
Bearing assemblies x 32
NOTE: Angle aluminium is a lot easier to work with than angle iron - which is very heavy and hard to drill & cut. It also goes rusty and is generally not much fun to handle.
ALSO: Try to get the wheels positioned closer together so they sit on the upper/top portion of the track rather than middle/sides of the track. (Or in other words - go for a small/narrow "L" shape area for the track to sit in) I found wider-spaced wheels were trying to bend the pipe and make the dolly harder & more jerky to push with weight on it.
Enjoy & please comment if you watch.
Honours: #83 - Most Responded (All Time) - Howto & Style #77 - Most Responded (All Time) - Howto & Style
less
|
|
| |
|
kamalbocat favorited a video
(2 days ago)
Schuyler Fisk in the film "I'm Reed Fish" performing "From Where I'm Standing", a song she wrote for the film.
|
|
| |
|
kamalbocat favorited a video
(2 days ago)
Daft Punk - Interstella 5555: The 5tory of the 5ecret 5tar 5ystem
Interstella 5555 is a feature-length Japanese animated musical film originally re...
more
Daft Punk - Interstella 5555: The 5tory of the 5ecret 5tar 5ystem
Interstella 5555 is a feature-length Japanese animated musical film originally released on December 1, 2003. The film is the visual realization of Discovery, an album by Daft Punk. Each track from the album has been animated as an episode in the story of the abduction and rescue of an interstellar pop band. The film was produced by the creators of the Discovery album, along with Toei Animation, under the supervision of Leiji Matsumoto. The film has no dialogue and minimal sound effects.
Music list
1 "One More Time" 2 "Aerodynamic" 3 "Digital Love" 4 "Harder, Better, Faster, Stronger" 5 "Crescendolls" 6 "Nightvision" 7 "Superheroes" 8 "High Life" 9 "Something About Us" 10 "Voyager" 11 "Veridis Quo" 12 "Short Circuit" 13 "Face To Face" 14 "Too Long"
less
|
|
sorry dude it take me 1 year bru blh reply cmmnt u....
hehehhe