Canal de chipotletv

thats right, theres a voltage missing from what i was told, a thin conection inside the panel shorts, and they came with the solution with a "jumper cable" and resistor"

I'll recomend a 60 W soldering iron, if you dont have, try adding low melting solder to the existing one, you may need to repeat twice the proceedure, but I still recomend a higher wattage soldering iron. Have a nice one!

Hi there, yes, it would work fine, you can replace it, just be sure to place the tape exactly as the one on the new vhs tape you are replacing. take care!

Que tal, tu problema es que la cinta esta atorada, no corre libremente, en medio de los carretes llevan un seguro que detiene los dos, cuando se inserta la cinta se debe desbloquear, fijate donde esta atorada la cinta. Cualquier duda avisame. Saludos

Hi there, don't know where you live, but in my case, I couldnt find where too, so what I did i took one from an old dvd / karaoke player that it was not cost effective to repair. Also try looking on the internet, depending on your location It could be shipped to you from almost anywhere in the wo...

Muy probablemente, un falso contacto, soldadura fria, o cable flex, dale unos golpecitos para ver si regresa el display aunque sea brevemente. Comenta. Saludos

Que tal, ese tipo de fallas aunque no me han tocado, se presentan generalmente por una falla en la membrana que une a la pantalla con el "buffer" de la T-con, basicamente es por un falso contacto, lo que tendrias que hacer, es desarmarla y presionar sobre la membrana donde se genera la linea. Te ...

Que tal, puede ser que sea un falso o malos botones en la tv, prueba lo siguiente, prende la tv y luego desconectale la tarjeta de los botones, fijate si aun asi presenta la falla. sino, reemplaza todos en dicha tarjeta. Comenta resultados. Saludos!

Que tal, de entrada puede ser cualquier cosa, no te sale algun codigo de error?, has probado desconectando modulos uno por uno? para ver en que seccion se encuentra la falla?, hay tambien que revisar soldaduras frias. dame un poco mas de detalles y con gusto te ayudo. Saludos

que tal, buenos dias, es muy probable que tengas un problema con un falso en la union de las membranas con la pantalla. Desarmala completamente y con cuidado presiona estas uniones para ver donde se encunetra el falso, (membranas que unen la pantalla de lado izquierdo) Estas estan unidas por por ...

Hi there, does the caps you changed were bulged or leaking?, sometimes there are bad caps still there just about to bulge, I would recomend changing the rest of them on, its the cheapest way to rule out causes, you can test them, but you'll need a capacitance meter and a ESR meter in order to be ...

secure them with something not conductive and heat resistant, like I did on this video. You have the same problem, just that the false contact is on the union with the bond tabs. It's not always fixable, Its not always fixable, but Its worth the try. Be very careful, the screen is very delicate a...

Hi there, I would be glad to help, just a couple of questions. The 3 tapes you mention, does they "spin" play in the vcr? or the VCR ejects them or get stuck?, The vCR plays them but you don't get any video or audio?

Hii there, bet you already fix it, but if not, tikkisetti is right, just take the flex cables out, reseat them and problem solve, good luck!