bigtoy302's channel

The Southern Rock Racing Series was developed to allow the "average joe" who was looking for a little more than a regular trail ride. The SRRS Xtre...

Interested in MADRAM11 T-Shirts Click HERE

http://madram11productions....

TC was getting some Huge Air on Lunch Line at GrayRock Offroad Park.

Ls1 4Runner playing on a small bank.

This video was uploaded from an Android phone.

2jz 4runner dyno at garage 808. Made 357hp and 340ftlbs at 15 psi with a holset hx35 and megasquirt 2.

Ls1 running on Megasquirt 3. Manual 4l80e, Np241 box4rocks doubler, Atlas 5.0. 5.38 Dana 60's

Hanging out at ThunderHill Dirt track

This is my home built CNC plasma table running A candcnc THC and Mach3 control. I am using A Hypertherm powermax45 plasma cutter. This is 10ga stee...

2jz 4runner dyno at garage 808. Made 357hp and 340ftlbs at 15 psi with a holset hx35 and megasquirt 2.

This is my 1992 Toyota 4runner with a 2jzgte swapped in. It is running A Holset hx-35 turbo and Megasquirt 2 management.

2jz 4runner, megasquirt 3, Holset hx35, Dana 60's front and rear.

Here is my homebuilt press brake running Mach3 and dynomotion control.

Here is my homebuilt press brake running Mach3 and dynomotion control.

This is my 1992 Toyota 4runner with a 2jzgte swapped in. It is running A Holset hx-35 turbo and Megasquirt 2 management.

Here is my Corrado with a built 1.8t swapped in on the dyno at Techtonics tuning. it made 342hp

Mach3 dynomotion cnc press brake backgage. Keling dc servos with Rockford ballscrews

Mach3 and Dynomotion controlled homebuilt cnc press brake.

2jzgte 4runner

This is my home built CNC plasma table running A candcnc THC and Mach3 control. I am using A Hypertherm powermax45 plasma cutter. This is 10ga stee...

2jzgte 4runner

Here is my Corrado with a built 1.8t swapped in on the dyno at Techtonics tuning. it made 342hp