I do not trust the instruments. Why not put a resistor in series with the supply source and monitor the heat vs the output heat. Not sure what size the resistors would have to be for a 1 to 1 heat relationship. Thanks for your work.
Hi Gotoluc, It seems that if you have 23.4uF and the applied freq is 60hz that your winding thats being resonated must be about 300mH for that to be "resonant" based on the mains assumption... Is that about right? What happens if you swap out the 10ohm 10 watt resistor for a fwbr and a cap? are you able to retune the resonance to have the wattmeter show 0 watts again? is it any different if you leave the secondary open? good experiment!
You can convert (efficient) switched square wave into a sine waveform using an inductor in series with a capacitor having values that are tuned to the frequency of the square wave.
there was one comment on the previous video...suggest that "the power company may take measures against those type device on the power line in your house!!!!well if the power campany may take any action...we will be able to tell them to remove their equipment ,equipments and wire...soon soon we will install a battery array and will become energy independent of them,and that's will be the new policy!!! its pay back time,its maybe wise for them to pay for the power we deliver.!at the power line!!
@z1zaz there,s a lot more videos proving this same CLOSED SYSTEM ( CIRCUIT ) RUNNING ON BATERY AND CAPASITORS .....PROVING THAT THERE IS ENERGY COMMING IN ...!!! AND BEING GENERATED BY THOSE CIRCUITS....!!!! WE HAVE A SYSTEM / CIRCUIT STILL RUNNING NOW AT THIS TIME FOR WEEKS ALMOST A MONTH ....KEEPS CHARGING THE BATTERYS AND CONSUMING ENERGY BY THE LED IN THE CIRCUIT, WITHOUT CONSUMING ENERGY OF THE POWERSUPLAY....SHOWN IN OUR VIDEO AT THEWATERENERGY1 TUBE CHANNEL: "THIS CIRCUIT CANCEL OUT AMP
@z1zaz WELL SURE!!! YOU NEED TO GO ONE STEP BACK IN THE SYSTEM / CIRCUIT !!!! BETWEEN THE POWERSUPLAY AND THE BATTERYS , AT THE TRANSFORMER TO BE PRECISELY !!!
there is place where energy is comming !!!!created.!!! or generated how you like !!! there must be a door, somewhere go's open and the energy comes in, and it's not that hard to use batterys on both side of the system,and keeps it running and still remain power / energy to share with the power companies...it;s looks like.....
@z1zaz continued ...it's looks like you are not on my srceen , but behind my tv set... by other words you will never be convince..!!!! there is a video on pesnetwork channel ( Physicist Steven E. Jones shows 8x overunity circuit and measurements (1of2) try to explaine it....stanley meyer explaine it also in his videos !!! maybe is it time for you to start doing the test by your self and show u.s thats it's not works.!!t's a matter of time and it's will break throught.!thermodynamic energy forms
@z1zaz OKE MY FRIEND...I do understand we finally on the same screen,and that is all about.!!! it,s a choice how to measure ,.it's still shown that it's posible to kill the watts...by those systems / circuits....!!!
we do not have all the parts to take the measurments only with the battery.but we have a circuit running form to day on...and will report thise later on our channel...it's time to go back at work in the lab and do some more research,i hope you will keep follow our work and joint u.s
I should like to make another comment - that a toroid is by its nature - a closed system which transforms efficiently.
Unless a toroid is used with more complex forms of winding it cannot have any 'spatial' coupling, or a longitudinal wave effect within the winding in the same way that other types of open ended windings can.
@z1zaz SURE YOUR COMPLETE RIGHT!! we are doing a lot of test with the transformers winding , to findout what is the most efficiently way to go...the toroid or the H and HH cores ,we beleave there is a lot more to explaine and discover ...it,s looks very promising..!!
@z1zaz YOU CAN CHECK IT OUT ON OUR CHANNEL THEWATERENERGY1 ( "THIS CIRCUIT"---CANCEL OUT THE AMP AND THE VOLTAGE )...
WHAT I DO REALY NOT UNDERSTAND , YOUR NOT SHOWING ANY TEST BY YOUR SELF AT YOUR CHANNEL !!!! WHY DO YOU DO'NT TAKE THE TEST AND RPOOF THAT WE ARE WRONG ?????
IT'S SIMPLE AND WORKS VERY SIMILAR AS ALL GENERATORS....!!!! EXCEPT THAT IN THOSE SYSTEM / CIRCUIT THERE IS NO BEARINGS OR MOVING PARTS !!! EXCEPT THE ELECTRONS BY THEM SELF!!!
Please put a moving coil or moving iron milliameter in series with the line connection because a digital Watt-meter capable of reading only in-phase voltage and current will give a false reading when you have tuned to perfect 90 degree phase shift.
The main line supply system has an extremely low source impedance; your measurements might appear to be correct, but your conclusions are WRONG.
Do you know what this effect is?
The alignment and release of electron orbits within the core, where the orbit alignment coherence is related to winding current which is resonantly phase shifted with respect to the applied voltage !
Please appreciate this is a CLOSED system, and thus incapable of generating excess energy.
cool cool very nice you're proof it again,the same results we also finding, shown in in our video ( "THIS CIRCUIT"---CANCEL OUT THE AMP AND THE VOLTAGE )
keeps going there is more !!!!
its pity you deleting the video and reactions there was some nice reaction ...!!!!!
Hi Luc! Iwonder how much power can you draw on the output... did you try to attach a bigger load and retune the capacitor? It would be interesting to see... Keep on the great work!
Comment removed
zarkoasenov 3 months ago
I do not trust the instruments. Why not put a resistor in series with the supply source and monitor the heat vs the output heat. Not sure what size the resistors would have to be for a 1 to 1 heat relationship. Thanks for your work.
252517 4 months ago
Great work excellent presentation will work more on the one to one transformer sure makes things easy to balance though thanks
DrSaminstine 4 months ago
Hi Gotoluc, It seems that if you have 23.4uF and the applied freq is 60hz that your winding thats being resonated must be about 300mH for that to be "resonant" based on the mains assumption... Is that about right? What happens if you swap out the 10ohm 10 watt resistor for a fwbr and a cap? are you able to retune the resonance to have the wattmeter show 0 watts again? is it any different if you leave the secondary open? good experiment!
CoruscantMe 4 months ago
What I found is that this circuit only works on AC and SAWTOOTH .
bennjanse 4 months ago
@bennjanse
You can convert (efficient) switched square wave into a sine waveform using an inductor in series with a capacitor having values that are tuned to the frequency of the square wave.
z1zaz 4 months ago
This is the truth - I have done the same in South Africa - it works. We only run on 240v.
Congratulations. This info must go to the people - for ever.
bennjanse 4 months ago
Comment removed
PoirierMike 4 months ago
there was one comment on the previous video...suggest that "the power company may take measures against those type device on the power line in your house!!!!well if the power campany may take any action...we will be able to tell them to remove their equipment ,equipments and wire...soon soon we will install a battery array and will become energy independent of them,and that's will be the new policy!!! its pay back time,its maybe wise for them to pay for the power we deliver.!at the power line!!
THEWATERENERGY1 4 months ago
@THEWATERENERGY1
I suggest you prove the battery+inverter option first before mouthing off like that.
z1zaz 4 months ago
@z1zaz there,s a lot more videos proving this same CLOSED SYSTEM ( CIRCUIT ) RUNNING ON BATERY AND CAPASITORS .....PROVING THAT THERE IS ENERGY COMMING IN ...!!! AND BEING GENERATED BY THOSE CIRCUITS....!!!! WE HAVE A SYSTEM / CIRCUIT STILL RUNNING NOW AT THIS TIME FOR WEEKS ALMOST A MONTH ....KEEPS CHARGING THE BATTERYS AND CONSUMING ENERGY BY THE LED IN THE CIRCUIT, WITHOUT CONSUMING ENERGY OF THE POWERSUPLAY....SHOWN IN OUR VIDEO AT THEWATERENERGY1 TUBE CHANNEL: "THIS CIRCUIT CANCEL OUT AMP
THEWATERENERGY1 4 months ago
@THEWATERENERGY1
You do know ? that the reactions within batteries mean they retain charge more efficiently with short pulses !
That is a chemical activity you are reporting NOT energy coming in !!!!!
Where do you think this energy is coming from ?
It is a chemical reaction within the battery, and will die when the battery dies !!!!!
z1zaz 4 months ago
@z1zaz WELL SURE!!! YOU NEED TO GO ONE STEP BACK IN THE SYSTEM / CIRCUIT !!!! BETWEEN THE POWERSUPLAY AND THE BATTERYS , AT THE TRANSFORMER TO BE PRECISELY !!!
there is place where energy is comming !!!!created.!!! or generated how you like !!! there must be a door, somewhere go's open and the energy comes in, and it's not that hard to use batterys on both side of the system,and keeps it running and still remain power / energy to share with the power companies...it;s looks like.....
THEWATERENERGY1 4 months ago
@z1zaz continued ...it's looks like you are not on my srceen , but behind my tv set... by other words you will never be convince..!!!! there is a video on pesnetwork channel ( Physicist Steven E. Jones shows 8x overunity circuit and measurements (1of2) try to explaine it....stanley meyer explaine it also in his videos !!! maybe is it time for you to start doing the test by your self and show u.s thats it's not works.!!t's a matter of time and it's will break throught.!thermodynamic energy forms
THEWATERENERGY1 4 months ago
@THEWATERENERGY1
To check out your 'screen' I googled SEJ-Pesnetwork-8x.
Found a video with an oscillator very similar to electron coupled tube oscillators I constructed 5 decades ago.
What struck me was the statement that current developing voltage across the 1 ohm resistor in series with the battery represents 'power'.
NO IT DOES NOT.
I REPEAT - to measure the battery power being supplied your MUST use a capacitor damped moving coil meter or a physically slow moving iron meter !!!!!
z1zaz 4 months ago
@z1zaz OKE MY FRIEND...I do understand we finally on the same screen,and that is all about.!!! it,s a choice how to measure ,.it's still shown that it's posible to kill the watts...by those systems / circuits....!!!
we do not have all the parts to take the measurments only with the battery.but we have a circuit running form to day on...and will report thise later on our channel...it's time to go back at work in the lab and do some more research,i hope you will keep follow our work and joint u.s
THEWATERENERGY1 4 months ago
@THEWATERENERGY1
Hello Friend.
I should like to make another comment - that a toroid is by its nature - a closed system which transforms efficiently.
Unless a toroid is used with more complex forms of winding it cannot have any 'spatial' coupling, or a longitudinal wave effect within the winding in the same way that other types of open ended windings can.
z1zaz 4 months ago
@z1zaz SURE YOUR COMPLETE RIGHT!! we are doing a lot of test with the transformers winding , to findout what is the most efficiently way to go...the toroid or the H and HH cores ,we beleave there is a lot more to explaine and discover ...it,s looks very promising..!!
THEWATERENERGY1 4 months ago
@z1zaz YOU CAN CHECK IT OUT ON OUR CHANNEL THEWATERENERGY1 ( "THIS CIRCUIT"---CANCEL OUT THE AMP AND THE VOLTAGE )...
WHAT I DO REALY NOT UNDERSTAND , YOUR NOT SHOWING ANY TEST BY YOUR SELF AT YOUR CHANNEL !!!! WHY DO YOU DO'NT TAKE THE TEST AND RPOOF THAT WE ARE WRONG ?????
IT'S SIMPLE AND WORKS VERY SIMILAR AS ALL GENERATORS....!!!! EXCEPT THAT IN THOSE SYSTEM / CIRCUIT THERE IS NO BEARINGS OR MOVING PARTS !!! EXCEPT THE ELECTRONS BY THEM SELF!!!
THEWATERENERGY1 4 months ago
Physics !!!!!
Please put a moving coil or moving iron milliameter in series with the line connection because a digital Watt-meter capable of reading only in-phase voltage and current will give a false reading when you have tuned to perfect 90 degree phase shift.
z1zaz 4 months ago
@z1zaz we are convince ...because we have same results ...by doing the test !!!
THEWATERENERGY1 4 months ago
@THEWATERENERGY1
PLEASE.
The main line supply system has an extremely low source impedance; your measurements might appear to be correct, but your conclusions are WRONG.
Do you know what this effect is?
The alignment and release of electron orbits within the core, where the orbit alignment coherence is related to winding current which is resonantly phase shifted with respect to the applied voltage !
Please appreciate this is a CLOSED system, and thus incapable of generating excess energy.
z1zaz 4 months ago
cool cool very nice you're proof it again,the same results we also finding, shown in in our video ( "THIS CIRCUIT"---CANCEL OUT THE AMP AND THE VOLTAGE )
keeps going there is more !!!!
its pity you deleting the video and reactions there was some nice reaction ...!!!!!
no doubt , your going in the good direction !!!
THEWATERENERGY1 4 months ago
Hi Luc! Iwonder how much power can you draw on the output... did you try to attach a bigger load and retune the capacitor? It would be interesting to see... Keep on the great work!
kapierenundkopieren 4 months ago