DigiExpress - iPod Nano 3rd Generation LCD installation

[Mastodon704]

Are tools included when purchasing an item?

[DigiExpress]

@Mastodon704 We include a set of Spudger tools (the blue or green plastic tools) and a screwdriver if needed (phillips, flat or torx). Please read the description of the part you are ordering to find the specific tools provided with that part.

[kikiseven06]

okay i was told the girl tht had my nano 3rd generation before me had clicked on sync to this computer only she said it would only hook to hers is this something tht can happen if so how do i fix this??? ty :)

[DigiExpress]

@kikiseven06 I would suggest visiting Apple's Support site to find out how to authorize your iTunes library with that device. Though I believe you would need to put the iPod into Disk Mode and restore it through iTunes to its original factory settings. Once this is done you will be able to sync it with your computer, assuming that there is no damage to the iPod.

[kikiseven06]

@DigiExpress how do i do this without hooking up to the computer since it dont show on there i got it into disk mode but didtnt know wht to do then :)

[kikiseven06]

okay i got a nano 3rd generation it wont show up on the computer or in itunes plz help i have tried all kinds of things.. i tried the usb port i tried the fire one any help plzzz :)

[DigiExpress]

@kikiseven06 take a look into the headphone jack for any sign of a red or pink color, this means water damage. if no water damage, then hold the menu and center buttons for 10 seconds and once the screen fizzles out, hold the center and play/pause button. This will put it into Disk Mode and bypass iTunes. If this does not work then you may have a problem with your main electronics board.

[lorddragongo]

okay umm... i think this could be a problem with my battery or something.... my ipod nano 3g wont turn on unless i have it plugged into the computer... when it is plugged in it says connected eject before disconnecting. and it wont let me do anything else.... it shows the language options for about 5 seconds when i first plug it in..... and then changes to the "connected eject before disconnecting".... please help?

[DigiExpress]

@lorddragongo try doing a hard reset (center button and menu button for 10 sec), then as soon as the screen fizzles out, hold the center and play/pause buttons for 10 seconds. this will put the device in to Disk Mode and you may see it open up in iTunes. If it does, try to do a restore. If nothing happens, then may want to open the iPod to see about the battery needing replaced. Though when you open the iPod check for any corrosion from moisture or water damage. We do have a Diagnosis Service

[MrEled101]

A year ago, the back light on my ipod Nano 3rd generation stopped working, and I bought an ipod Touch to replace it. Long story short, I dug my Nano out of a drawer and just replaced to LCD screen in it thinking this would fix the back light issue. However, it did not.

I have replaced the LCD screen, updated it, and restored it. Can you help me to figure out what the deal is?

[MrEled101]

Oh, and I also have all the settings set at the maximum, such as light level and length of time lit, so I know its not that either....

[DigiExpress]

@MrEled101 the "dim" screen issue, having no backlight, is usually the LED lights that are inside the LCD screen. If not then you have an issue with the coil and fuse set on the logic board itself. While I know this exists, I don not know where exactly on the nano 3rd it is located. Basically in replacing the LCD screen you have eliminated that as the culprit and know it is the logic board. You may be able to find a replacement board on ebay or craigslist for cheap, just be careful.

[PRiiZMx]

@DigiExpress its sooo hard to open it! you make it look so easy, any hints/tips? thanks

[nsiac]

I've just replaced the LCD, click "Play Button" and the iPod is power on and it works. One moment later I've disassembled again the iPod for clean it. Now it doesn't work. If I click Play Button nothing happening. The same if I connect to computer. It doesn't work :( Please, have you ideas?

[DigiExpress]

@nsiac I would check, while the iPod Nano is open, the position of the hold switch. Sometimes this switch gets stuck in the on. If that is fine, then check the clickwheel ribbon cable. The bending of the ribbon cable can cause "kinks" in the cable and it may be damaged. Basically when you apply external power to the iPod it should turn on. But on battery power you need to use the clickwheel, and you would be making sure the clickwheel is installed correctly and the hold switch is not stuck.

[s4asuke16]

My iPod works fine when it is connected to the computer. When I disconnect it from the computer,it still works fine. However, when I turn it off, I can't turn it back on unless I connect it to the computer. Do you know how I can fix this problem?

[DigiExpress]

@s4asuke16 That issue could be with the clickwheel or a faulty lock switch or the logic board. It's really hard to tell off-hand. The first step would be to replace the clickwheel, but I cannot be certain as to why the iPod will not turn on without external power. This would fall into our Diagnosis service, as this is hard to pin down without having the device here with us.

[ROFLdavid2009]

my ipod died and the scrren juss stayed at the apple logo for like 3 days and turned off and now wen i plug it up to my laptop to charge it doesnt do anything idk wats wrong with it

[DigiExpress]

@ROFLdavid2009 Have you tried to charge it using the wall (A/C) charger? If so what does it do when charging from the wall?

[KodySummers]

I just bought a battery to replace but I can't get the damn thing off! If I sent you guys the battery with the Ipod would I have to pay any additional money for the repair or would you just charge me the 25 bucks?

[DigiExpress]

@KodySummers The Diagnosis / Repair service (or bench fee) is only $25.00 and we would install the battery for you. In this case however the iPod Nano 3rd Generation model has a backplate that is not reusable. You would see an additional $9.99 for a replacement back plate. This is stated on the parts page for the iPod Nano 3rd Generation as well. Please visit the website for more information or to place a repair order.

[Freakof5FDP]

So the real reason Apple doesn't want people opening up their products is because they're powered by Samsung. Haha fail.

[DigiExpress]

@Freakof5FDP Samsung and Apple have had a very close relationship when it comes to their parts. Samsung is just simply one of the biggest manufacturer's of data storage device, now NAND Flash chips as well. They also have powered the iPod Touch and original iPhone with Samsung ARM processors. If you search the recent Apple news you will find that the two are now suing each other and Apple seems to be leaning toward Toshiba for certain parts (mainly LCD screens).

[Freakof5FDP]

@DigiExpress

Oh. Alright. So anyway, my screen's broken on my iPod. Do I have to fix it myself or can you guys do it?

[DigiExpress]

@Freakof5FDP You can visit our website and any part that is available on the site we can install for only $25.00 in addition to the cost of the part.

[chelsheartsyou]

Every time I try try to charge my ipod nano 3rd generation it says "battery low connect to power" , but if it's not plugged in to the computer it is all the way dead. Please help me!! Lol.

[DigiExpress]

@chelsheartsyou That sounds like it may be a deeper issue, we can do a Diagnosis of the device for $25.00 plus S+H. The service takes 1-2 business days to get a Diagnosis result. Please visit our website for more information.

[chelsheartsyou]

Every time I try try to charge my ipod nano 3rd generation it says "battery low connect to power" , but if it's not plugged in to the computer it is all the way dead. Please help me!! Lol.

[xTremeShadowKiLLers]

omg thx!! u help me 2 save my ipod :)

[pivotsodierx2]

is the click wheel replaceable mines dosnt work for some reason

[DigiExpress]

@pivotsodierx2 We sell the click wheel ribbon cable which sits under the click wheel and makes it touch sensitive. You can find the part on our website and also other helpful information.

[a89lopez]

Looks easy on the videos but the back plate is a bitch to remove with the plastic tools that you get. So i finally get it open and install the screen and now it does nothing. No lights no sound .....any idea what i did wrong. i went over the video numerous times and still nothing. i might have messed something up removing the back plate. the video is still great very helpful im just an impatient bastard. if you have any idea what i did wrong please let me kno

[a89lopez]

@a89lopez ok now out of no where it decides to stary working crazy

[MegaSlinky]

so my brother thought he could fix it but he messed everything up! how much will it cost for a new backplate and get it working, he put in a new screen, please let me know

[DigiExpress]

@MegaSlinky For the Nano 3rd generation a new back plate is $14.99 and we have a $25 installation/ repair service. Check out our website for more information.

[Solares310]

@DigiExpress where can i get that tool from the beginning

[DigiExpress]

@Solares310 You can purchase the Spudger and other tools from our website under the Tools section.

[camboy1132]

this is dressing just looking at it. I feel the pain of you people. I gave my asper one surgery. I felt bad for it. I did a ram upgrade.

[Rking100000]

Lost you at 1 43. lol

[DigiExpress]

@Rking100000 If you are having troubles you can always send it to us and we can help you install your part if you purchased the part through us. Check out our website for more information.

[TheSteadfastlady]

Great help, many thanks. I thought I had done something wrong when the screen stayed white but I hadn't realised that you have to do a reset once the new screen has been secured. To do this you just press the menu and middle buttons down at the same time and the screen will go off and the Apple sign will appear and the screen HOPEFULLY should work. Again, many thanks for the video. Was very pleased I managed to do it.

[Chuy000]

i have 4th gen nano , been overcharged i think , can you help ?

[DigiExpress]

@Chuy000 We replace batteries for the nanos 4th gen. Check out our website for prices and more information.

[sk8er4ever9999]

@DigiExpress what is that small metal clip near the headphone jack, i lost mine btw, what does it do

[DigiExpress]

@sk8er4ever9999 The little metal clip that is by the headphone jack does come off, you just need to lay it back in there to hold things in place before putting the back plate on. Thank you and have a great day!

[djchucky21]

were could i get one of this tool

[DigiExpress]

@djchucky21 We sell the tools on our website. Its on the left hand side under the category tools. Thank you and have a great !

[djchucky21]

were could i get one of this tool



[alynah2010]

hey my ipod screen dont light up its just dark can you help me out

[DigiExpress]

@alynah2010 We can replace the LCD screens in the iPod nanos, just send it to us. Check out our website for more information.

[crushx69]

what kind of clue to use when replacing new screen

[sanzerellaproduction]

i have a craked screen can you fix that i live in ct of the usa or is there anything i can do and how much

[DigiExpress]

@sanzerellaproduction You can purchase a new LCD screen for your iPod on our website. You can replace it yourself or we can replace it for you for $25. The cost of a new LCD screen for the 2nd generation nano is $29.99. Check out our website for more information.

[sonador2727]

esta muy fasil  orale

[DaOmen718]

I followed all the directions and my iPod beeped, and isnt working. HELP. I'm so frustrated.

[Mosky24]

hi! The lcd screen of my 3rd gen ipod is always white! Music plays, but the screen is always white! Is the lcd broken? I'm from italy... can you repair my ipod?

[DigiExpress]

@Mosky24 We repair iPods from all over the world! It may be your LCD, we'd need our technicians look at it to be sure - our tech fee is only $25 and we guarantee our work for the life of your iPod. There is no further cost for repairing your iPod unless additional parts are needed to complete the repair.

[genjiband]

can you replace the back of my ipod touch 2nd gen with a new one?

[DigiExpress]

@genjiband

Yes we can. Please call us for more information at 1-800-440-4693 or visit our website.

[MasterTechRepair]

one thing i do knoe is that in the biggining of the vid he was taking of the back plate and at the end of the vid the back plate he put on had a brand new plastic on it so meaning that he bought a new one cuz he knew he was gonn fuck up the one it had

[davidevgen]

how do you remove the click wheel?

[MasterTechRepair]

@davidevgen its just on there with glue just lift it up with a small flat head dont be scared it wont break

[davidevgen]

@MasterTechRepair i not afraid of breaking it im afraid of bending it thanks for telling me though! aleast now i know its not being held by a screw.

[MasterTechRepair]

@davidevgen ohh nah its not if it bends just bend it back ... u should see my office right now full of iphone and ipod parts im trying to build acouple out of all these spare parts

[davidevgen]

@MasterTechRepair ok thanks! again! i subed you if i need any other questions.

[EazyE3232]

My backlight doesnt work, is this the batteries problem or my LCD?

[DigiExpress]

@EazyE3232 The back light is in the LCD.

[EazyE3232]

@DigiExpress

Do you think Im better off just getting an ipod touch?

[MasterTechRepair]

@EazyE3232 ill buy the nano off from u if u dont want it

[EazyE3232]

@MasterTechRepair

Whats your offer? Its got no backlight, its 8gb and the cover is a bit scracthed. I can upload a pic if ur interested.

Its a Red 3Gen Nano

[ezkeyboardkid58]

this vid is bull ur gonna spend like a hour getting this back off i changed other ipod batteries and iphone screens and thing but this model is a pain in the ___

[MasterTechRepair]

@ezkeyboardkid58 you must really suck

[Hilokilo06]

do they care if u send a jailbroken ipods?

[DigiExpress]

@Hilokilo06 No, we will fix any iPod.

[Hilokilo06]

@DigiExpress oh okay. i am going to use this site! ^^

[halodaler]

How do I go about repairing a broken backlight?

The rest of the LCD screen works fine, minus the light

[vadimpatsan]

You will need new LCD screen to solve that problem. =]

[batty505]

@halodaler

you should be able to set that in the brightness from the settings tab.

if you get no display, then its either in hold mode, or its set to very dim, OR the lcd still needs to be replaced.

[ClaphamSlag]

I don't recommend trying this.The screws/connector ribbons are easy to deal with, but getting the back off properly, especially with that spasticated piece of plastic tool thing, is next to impossible. You end up using a stronger tool, which frigs the shape of the iPod meaning it'll never snap back together properly and be full of crap in about two days.

I'm a big believer in taking things apart and fixing them yourself, but on this occasion I would bite the bullet and pay an expert to do it.

[DigiExpress]

Most iPods are easy to open, however the Nano 3G isn't one of them.

It is well worth the $25 to have our technicians repair the iPod for you.

[MasterTechRepair]

@ClaphamSlag its acutualy is easy just gotta knoe the trip ill tell u one ...u get ur self a flat head exacto knife that will do the trick practice makes perfect im not saying first time is gonna be great but after awhile u will get the hang of it

[Zapadac]

Actually, I don't recommend replacing the back plate. One you take the back plate off, it won't go back on as tight as it was. This is a good thing because if you ever have to replace the LCD again, it will be much easier to open the iPod. The back plate won't go back on tight on my iPod, so all I did was go to Target, buy a rubber sleeve protector for the iPod, and slipped the iPod into that. The iPod fits pretty snug into it, so you don't notice the loose back plate.

[Zapadac]

Ha! Easier said than done. I love the way all of the iPod LCD replacement videos make it look SOOOO easy to pry the iPod open. I can tell you, you will NEVER get the iPod Nano 3G open with those little plastic pry tools. It takes a friggin chisel to open that thing. And don't expect it to ho back togther just right either. It's a pain to open and close. The actual LCD replacement is not so hard. Just the rest is hard.

[SCHIZOPHRENICxRSxLOL]

My ipod nano 3g was left out in the rain the other day and you can see the menu etc but the backlight has stopped working.

Would the lcd screen replacement fix the backlight so it turns off and on.

btw i have already tried going to settings and turning on the backlight.

[DigiExpress]

It is possible that you may just need a new LCD, however in some cases, the backlight is shorted out from the mainboard's LCD connector. The only way to tell is to try a new LCD.

[gixxer450]

I am not able to put back metal plate all the way, is there sum sort of trick, do i need to bend clips back a certain way? or should i just get a new one?

[DigiExpress]

Those can be tricky. It depends on how much the clips bend when you take the back off. It is usually better to just replace the back plate. We sell them for $14.99.

[gixxer450]

And it just clicks back on the new one? no trouble or nothing?

[DigiExpress]

It takes 1-2 days to repair, and depending on the shipping you choose, you can have it back in 2-3 days.

[DigiExpress]

Sure. We sell them separately and also have a 6 piece iPod tool kit.

digiexpress . us

[juanramos1234]

i really need help my i pod LCD broke so i bought one on ebay and i installed it on and connected it to my xbox 360 and it beeps twice then i installed the old one and it doesnt beep please help

[DigiExpress]

Sorry to say it, but that is what you get with EBAY parts. Most of them are defective, and there is no return policy. A defective part can actually cause more damage to your iPod.

To answer your question, when a Nano 3G beeps, that usually means that there is an error on the main board.

Send it to us and we will find out what the problem is.

[XXBigJunetownXX]

Here's the deal digiexpress my iPod nano 3rd gen needs a new LCD put in. What would be the total costs of shipping and all to repair it?I allready know the LCD cost $29.99 on your website and the shipping is around $6.50 soo I was wondering what would be the real price in total for you guys to fix it for me?

[DigiExpress]

$29.99 LCD

$25.00 labor

$6.75 shipping

---------------------

$61.74 Total.

Please let us know if you have any other questions. Thanks for choosing DigiExpress!

[Balzion]

I just accidentally killed my iPod nano 3G doing this by breaking the LCD... just being stUpid.

[TheDude9024]

I'm sending you my ipod to be repaired. Who should I make the check out too?

[DigiExpress]

"DigiExpress"

For more information about our repair service, please visit our website.

[OntheStaff]

I purchased an LCD screen and did the repair myself. Did everything exactly as shown in the video. My problem is, when I plug the ipod in with the new lcd it won't boot properly. The screen flashes on and off, no apple logo or anything. Though, the old screen boots just fine with the ipod, minus the fact that is splotchy and broken.

[TheDude9024]

What is the new return postage rate to 91343 for my LCD screen install? Is the price for the install still $25, and should I send you a check?

[DigiExpress]

We offer insured First Class for $6.75 (3-5 days)and insured Priority for $8.80 (2-3 days).

Installation is still $25.

[stzzo]

Can some of you who have succeeded at this tell me: how do I get the case to start opening? I work the tool around, but the case halves just don't open. They seem to spread a tiny bit - maybe 1 millimeter - but never go any more.

[stzzo]

Ah, I saw the other comments. Looks like it's just plain hard...

[darkspear65]

Well, i'd buy your broken iPod :D

[MunnyLife]

I got a problem with my clickwheel. I can scroll up and down with it but when I click it doesn't do anything. I can't select anything. Any help there?

[DigiExpress]

You probably just need a new click wheel. You can find them on our website.

[billboardne7]

how do you install a new click wheel? Mine no longer works at all and I have a new one ready to go with my ipod apart, but I can't figure out how to get the old click wheel off and then the new one on

[DigiExpress]

We can help you with that. Please visit our website for more information about our repair services. Labor is always only $25.

[darkspear65]

I suggest opening it back up and disconnect and reconnect the click wheel, but make SURE all the pins are in right.

[TheDude9024]

I replaced my LCD screen on my ipod nano because the backlight was not working. Now the backlight works, but its just a blank white page, nothing else will apear. Do you know how I can fix this?

[DigiExpress]

It sounds as if you do not have the ribbon cable fully inserted. Remove the LCD ribbon cable and slide it back in keeping pressure on it as you lock the tab.

[TheDude9024]

Alright, I just tried that twice and it's still doing the same thing. It's a brand new screen that I purchased from your website, so the screen should work. It must be something that I'm doing wrong. Can I send it to you to work on? And if so, how much would that cost?

[DigiExpress]

Installation is $25, Insured return shipping is $6.75 for a total of $31.75. Please include a note explaining the problem.

Thanks!

[GregofAI]

I just left mine on till the battery died then charged it up and again and it worked lol

[rdEST1990]

my ipod nano's backlight doesn't work do you know how to fix it too..

[DigiExpress]

You will need to replace the LCD screen, that will fix the backplight problem. The LCD is $29.99, you can find it on our website.

[AkilesJose]

Hey man, i've been trying to open this too, i got an issue on the Headphone Jack, i already have the replacement if i had to change it, but my biggest problem is opening the nano. Which tool did you use to open it? Can you point the thickness of the blade of that tool too? It will be reeeeeeally helpfull.

[DigiExpress]

Our techs use a basic opening tool, however they know exactly where the clips are. You can also use a watch back opening tool, which is much stronger. Be aware that once you open this iPod, the back may not go back on again nicely. You may have to replace the back plate.

[sr8shoota]

i've done everything but I was wondering if the ipod will work without the metal backplate. I dont want to put it back on only to find out i have to open it back up.

[vashantir]

I got the ipod to open...but am having a lot of problems closing it back...it's not easy as it is show in the video...i still havne't gotten it to "snack" back together

[DigiExpress]

There are metal clips around the perimeter of the back plate. Make sure that there is only a small gap between the clips and the side of the back plate. If there is too large of a space, the faceplate won't snap in. If you can't get it to work, we sell replacement back plates for $14.99.

[iam134]

Argg!

I cannot open my iPod at all.

The tools won't work and the iPod still refuses to open.

Trying to open it, I've done a LOT of damage to it.

Any ideas?

...I've used knives, screwdrivers, and just about everything.

Please help!

[DigiExpress]

These can be really tough. We use a watch back opening tool, but please be very careful, you can easily damage the main board. If you would like us to install it, please visit our website, the cost is only $25.

digiexpress,us

[darkwatcher56]

I did the same thing and actually aciddentally cut myself with the knives more than once.

[iam134]

When ordered from your site, does it come with any tools?

[DigiExpress]

Yes, it will come with opening tools and a screwdriver.

[poruk]

Try ebay for lcd's. it's cheaper and most of them comes with tools.

[Mikemix007]

How much is anew LCD screen? Please help.

[DigiExpress]

It is $29.99.

You can find it on our webite

digiexpress - dot - us

[tylerthefanatic]

You saved me and my iPod, thanks Alot!

Where does your tech team originate, because my little sister broke hers, an although I could fix it, I don't exactly have the confidence to fix hers, because I messed my iPod up quite a bit, and it doesn't close - I use tape. So what I'm trying to say is, where do I mail it or drop it off to?

[DigiExpress]

We are right outside of Pittsburgh, PA.

you can find out more info about our repair service on our website...

digiexpress ".us" not ".com"

[ogoje]

fascinating.. absolutely fascinating..

am into electrical engineering

[Carl199107]

Do the replacement screens come with backlight?

cuz on my ipod the screen is fine, only the backlight is dead

[metalkills55]

where does the tool come from? it wasnt "provided" with my ipod.

[mdb0790]

Most of the time when you buy a replacement screen for any small electronic part, it comes with a small plastic case opening tool for free. Or you can just buy it online somewhere (ebay) for a couple cents.

[metalkills55]

oh ok. i didnt know that. where can i buy a replacement screen? i didnt have the tool so i used a set of extremely small flatheads. it worked but idk if ill be able to put it back together without damaging it further.

[brittleware]

Well, I got the back off mine, but when I changed the screen the little clip that holds down the ribbon cable broke off! So now I have a nice new screen but no way to connect it to the Ipod...... Where can you get those little clips anyone?

[mixlmax]

Apple made the 3rd generation ipod very difficult to open and very easy to damage if you don't know exactly what you're doing. What a bunch of fuckers. I destroyed mine trying to get the back plate off and now I have to get another player. Then again if making money is their main objective, maybe they're not so dumb after all!

[chasingDUCKS]

the green tool dont work.

[DigiExpress]

This iPod is difficult to open, try a metal tool. We use a watch opening tool, but be careful not to damage the faceplate or the mainboard.

[stzzo]

Anyone know how to get the tool in the crack between the sides in the first place? I can't wedge it in at all.

[nightvisionstyle]

Thanks my LCD is finally woring!! :D But it was really hard, and my nano are more scratchy now ;D

[elyk46]

so i went on ebay and bought a screen to do this and i ended up getting 2 :D, so im gonna download this on my psp and do it at lunch at school tomorrow. bragging is fun

[spynenburger]

Thanks SO much for making this video - I spent about 30 dollars on a new screen instead of 170 on a new ipod.

I didnt have that green tool, so it didnt go back together so nicely, but everything else works like a charm :)

[phsbaseball2010]

Dude u rock! U saved me like $100 after the incident i thought i was gonna be like broke. but now i'm like not!

[lycon66]

how many hands do you have?!!

[samt101]

VV i meant to ask IS the side clip nessecary

[syphilistic]

It looks like the side clip is to secure the headphone connector in place.

I haven't cracked open a 3rd gen nano yet I need to wait for all the warranties run out first before I start getting some business.

[samt101]

i opended my ipod with a knife.. it opened fine but doesnt go back together completely. not too bad damage. but if the side clip... (that little metal peice on the headphone jack) completely nessecary? i installed my new lcd and couldnt get that back on.. ipod works fine but will it cuase problems later on?

[Cutiepie4453]

can u plez do a movie how to replace a ipod nano 2nd generation click wheel? or is it the same as the 1st generation click wheel repair movie? please answer soon!

[DigiExpress]

We have filmed it already, it is being edited and will be available soon.

[Cutiepie4453]

thank you =)

[raptorcommander]

This video forgot to mention to replace the six screws before snapping the covers back together. I'm sure most would figure this out, but it would sure be frustrating to find out afterward!

[noahheath12]

i meant to say color

[noahheath12]

By any chance would you guys happen to know where to buy a new ipod nano 3G lcd screen. Min is brocken from the inside not the outside so the solor leaked or something like that. also where could i get the opening tool you used.

[6stringplaya77]

why would Apple make a case that is hard to open and a battery that isn't replaceable? :\

[DigiExpress]

Both the Classic and the Nano 3rd gen are very difficult to open compared to older models. I don't think Apple wants you to be able to repair them. The battery can be replaced, however it is a difficult soldering job. We sell the replacement batteries and offer installation for just $20.

[DigiExpress]

It is difficult, but not impossible. We recommend having our techs do any installation on the Nano 3G iPods. We only charge $25, so it is well worth the money.

[Biomechanic24]

Well, but I think that the problem has turned more seriously.

The wheel does not also work, since if I connect the iPod, at least it should sound, and does not do anything. The cable of the screen has got damaged on it having tried to connect without success ... and thinking that I'm from Spain, I should know what would suppose the sending and return, a new LCD screen and the time that would take all this.

Thank you,

Roger

[tucfinland]

I broke the main board while opening the case. Wish I had seen this vid first...

That case is almost impossible to open even with tools. Stupid design. :(

Anyway, the vid is worth 5 stars. Just be careful while opening!

[rundat]

nvm finally got it open. By all means ditch that green tool kit and use them flat head screw driver, the littles ones. Losen from the bottom of teh ipod first

[rundat]

i mean from the top

[Silencerz75]

need some help

what i can use to open it?

i dont have the ipod opening tools

so i dont want to use a knife

[DigiExpress]

A thick guitar pick or watch opening tool works well. The Nano 3rd gens are harder to open than other models. Be careful not to put too much pressure in any one place, you can damage the main board.

[silhkum]

OMGOMG

my new lcd screen arrived,lol...it took me a while to replace the screen, but what took me ages was trying to get the ipod open,everything wenk ok, but i cant put the case on fully, but its all good:D:D

[drod5150]

My mom washed my lil' brother's nano 3rd so she bought him a new one. I took it and bought a new lcd and it works. I also ripped some of the ribbon so i have to mess with the connection every now and then.freakeystyley34, Where did you get that headphone jack I can't find it anywhere. And how did you replace it. Or did you mean you ended up buying a new Ipod ?

[silhkum]

aww...this is gonr be hard for me:(:(

[freakeystyley34]

It isn't quite as easy as it looks on the video, you need to be really careful.

The back is really difficult to get off, even with the plastic lever things. DONT use a knife, you'll just bend the back.

I managed to rip a bit of the ribbon going the headphone jack when i was putting it back together so i ended up buying a new one.

[muggleborn101]

yeah..ur rght..DO NOT USE KNIFE...

hahahah!!

my bro just makes his ipod ugly..(but not much)

my bro's ipod doesnt work anymore..

we dont know wats the problem..

..hahaha!!

on the other side..

mine still works..as good as new..^^

but!his using mine..im afraid he'll crack my ipod..hahaha!!

[bigguns127]

hah i bought an ipod nano 4 gig 3rd gen for 10 bucks off this guy the only problem with it is he cracked the screen so the whole screen is messed up because of the little crack but the guy said u couldnt repair it so i mgunna order and lcd screen off ebay and use this to fix it lol so i hope to god that it works so if anybody on here has tryed it and it worked of failed plz tell me lol i wont get my screen in for like another 3 dayz

[muggleborn101]

my brother is tryng to open his' using a knife.,how dumb..

HHAAAAHHHAAAA!!!

[richboy0003]

mines broken i try to turn it on and it just beeps and the screen doesnt turn on