Echo 1 E90 (P90) Disassembly

[figueroza]

can someone help me? i got an e90 and sometimes after loading a fresh mag, it'll shott right after about 3 bbs, those 3 bbs will get caught and its like the gun spits them out instead of shooting them. is the problem the gun, is it jamming, or am i just overloading the mag or something?

[ThePE12345]

i took out the upper reciever of mine and i put it back in and it doesnt sound like an airsoft gun and is waaayyy less powerful... it will drop in power at like 100 ft

[MightyKidMeal]

can you do a video on just how to change the motor on this gun?

[XxOBLIVIONPWNSxX]

@odstmexicanrecruit1 what does the gun sound like? Do the bb's roll out of the barrel or refuse to move? What kind of gun is this?

[cjoutdoors1991]

Would I be likely to seriously screw the gun up if I watched this video while changing the spring? I'm trying to avoid paying an extra $40 to get a pro to do it.

[odstmexicanrecruit1]

hey my gun doesnt shoot, when y pull the trigger it doesnt sound as normal, and the bbs dont come out of the barret

can someone help me?

[flyingpiplup]

@odstmexicanrecruit1 same thing happens to mine

[elgallito6669]

how long did it take u to get it?

[SuperDwang]

is this the same for a TM p90?

[krimsoninitiative]

The P90 is one of the most EASIEST aegs to disassemble. How about a Video on RECEIVER disassembly?

[Asianjumper103]

where does the anti reversal latch go

[proshot]

what size motor does the e90 take?

[HGClark]

@proshot long

[ParralaxFX]

@proshot I think it takes a long shaft motor.

[superguyperson]

u shud get a cordless power drill. lol

[MrBloodyGulch]

@causeisaids o91 clokwise

[causeisaidso91]

how do i remove the orange tip? which way do i turn it? like a jar, or opposite?/

[diekill123]

remove the orange tip and i sue you... lol

idk how to BUT remember to put it on.. OR ELSE

[causeisaidso91]

lol... no i know, but what does clockwise mean, it just means turn to the right, oposite of a jar right??

[jeremielibraty7]

ok so on a full mag on the midcap (67 rounds) when i fill it up all the way for the first 30 or so shots it misfeeds doesnt shoot right or it double feeds can you tell me what the heck is wrong with the gun for the first 35 shots it does that.

[byteme13456874]

does anybody know if u can upgrade the spring to a m120 without upgrading the gear box?

[CircleDriveVideos]

the e90 is already shooting around 400 fps... probably already has one in it

[dontbuyscions]

Any suggetions on how to make the p90 gearbox quieter? I've heard it's pretty loud.

[TheOneNamedMike]

I hear putting electric tape on gearboxes, makes it quieter.

Try that, but don't take my word for it.

[Italiangangst3r]

yes it is, try putting foam around the box

[Airsofter4ever123]

Is the gearbox on the echo1 p90 quality or no? Becuase I dont want it to break on me.

[KevLarGu]

its quality enough for stock and a bit more

[Gunnoe69]

where is the Cut-off lever at cause my semi don't work and i think that is the reason. cause my Cut-off lever failed!

[trinityairsoft]

Usuallt when the semi doesn't work its because the contacts are burnt out on the semi. Check your trigger switch the contact above the trigger, clean them good or even replace the switch, should resolve your problem

[DrakeMonk]

Hello, could i ask you one question.

I hawe a small issue with my Echo 1 E90, my trigger started to fire in auto mode while on semi.

I dont want to send it to repair cause i only got it like a week ago.

Could you recomend anything how to repair that?

Thank you.

[CountryBoy7488]

hey that happend to mine just buy a new battery i put my friends sr25 battery in it and shot it twice and it was fixed

[Gizmatic23]

@trinityairsoft my gun shoots a few then it shoots one out at like 180fps when they should all shoot at 380ish whats the problem? its pissing me off

[DEATHDEALER507]

no it is!!!!!!!!!!!

[DEATHDEALER507]

Can u help me i took my barrel out of the hop up system and i put it back in and it shoot way less powerful now please help.

[trinityairsoft]

you should double check that the hop-up nub wasn't lost during re-installation of the barrel.

[krapsicle]

what type of gearbox could i upgrade this with?

[thejackosaur]

its a V6

[trinityairsoft]

It is a v6 the main difference is that it doesn't have the standard TM bushing pattern for a v6

[kylermt]

its a speical type of gearbox very similar to the one in the m60

[ItZJKT]

where is trinityairsoft located? (state)

[ExistBMX]

Virginia