No More Paper Jams - Shooting Printer with 12 Gauge Shotgun Slugs

[hoshumberry]

Well, gee thanks. that made my day, never laughed so hard. I have the exact same printer that has the exact same problem , but I had a different "therapeutic approach". 5 or 6 pounding fists, then it was thrown over the balcony some 25 ft, its now sitting out in the rain to think about all that "paper jamming". Glad I am not the only one ;)

[ashqelonsunset]

Now "it's fixed"!

My kind of technician!!!

[samspace81]

Jordan doesn't mess around with that mossberg! Love the shooting videos. Makes me want to shoot my 9mm XD subcompact Springfield pistol and post it.

[hunkatiel]

I believe this is step 10 in the troubleshooting manual.

[RamblinAround]

@hunkatiel Yes, this is what's known as the "final" step. For some reason, it still wouldn't work.

[neppy503]

Also, watched the video again. It look like the butt of the stock is not snug up in Jordan's shoulder. Is it just me, or is it too short?

[RamblinAround]

@neppy503 It's not snug against his shoulder, because that's the way he chose to hold it. I'm not sure why he chooses to do it that way, but it works for him. He's never had a sore shoulder from it and he's still pretty accurate.

[neppy503]

Too bad you didn't buy it from Costco, they used to have a liberal return policy. :)

[RamblinAround]

@neppy503 It would be fun to put the pieces back in the box and see what they'd say.

[TheSassytiger]

and after you shot it printed out an obituary ..looks like fun!!

[RamblinAround]

@TheSassytiger It was a lot of fun. It's a good way to relieve a little stress. Thanks for watching!

[XboobtubeX]

now you should gather it all up in a box and return it to the store and say it just blew up when you plugged it in.

[RamblinAround]

@XboobtubeX If I could film that, it would make a pretty funny video.

[hunhun23]

You can fix mine too with the shotgun! :0)

[RamblinAround]

@hunhun23 Electronics can be frustrating sometimes. It's fun to take a little revenge every once in a while.

[steamboatwillie11]

when you said "ill be doing another shooting video, heres a canon" i thought you were about to shoot a real cannon at first.

[RamblinAround]

@steamboatwillie11 Believe me, I wish had a cannon...that would be cool.

[CoffeeKvetch]

Absolutely genius!!!  Hmmm... I wonder if I send you mine to shoot, will I gain the same sense of satisfaction?

[kaboomfamilyVlog]

it may work now.lol

[RamblinAround]

@kaboomfamilyVlog Maybe I should plug it in and see what happens...lol

[koioo2]

its now a model kit ^-^

[RamblinAround]

@koioo2 I think it's a piece of modern art now...lol Thanks for watching!

[ScottieDTV]

I always feel better after doing that..

[RamblinAround]

@ScottieDTV It really does relieve some stress. Thanks for watching!

[Aleromero77]

I dont know. Was it too expensive to have it fixed? Why not give it to a poor school or something like that?

[RamblinAround]

@Aleromero77 It's not cost effective to fix most electronics these days. New printers are very inexpensive.

[ziggassedup]

Your whole yard must be scattered with bits of busted appliances and led slugs by now.

[RamblinAround]

@ziggassedup LOL....yeah, there's definitely a few pounds of lead in that hill by now.

[m8kemexx]

she shooting vids are awsome and intense i love it great job

[RamblinAround]

@m8kemexx Glad you like them.......thanks for watching!

[paradoxdesigns]

gotta love the mosberg, turned that printer into pulp! very cool

[RamblinAround]

@paradoxdesigns I wish we had some buckshot laying around, that would have done some serious damage. Thanks for watching!

[talfacprez]

I owned a Canon printer only once. I stick to HP and Kodak printers ONLY. Canon needs to stick to cameras and stay out of the printer business. I have even heard horror stories about Canon copy machines.

[RamblinAround]

@talfacprez Yeah, Canon makes great cameras, but I'm not sure about everything else.

[StrikerTripleThree]

Rage Against the Machine

I can dig it,C00L.......=)

[RamblinAround]

@StrikerTripleThree Thanks for watching!

[tomhenrix]

Good shooting!!

[RamblinAround]

@tomhenrix Thanks!

[1963impala2dr]

revenge!

[RamblinAround]

@1963impala2dr I don't know what it accomplished, but it sure was fun.

[805ROADKING]

Oh No!! Me and Lil Racer just bought two of them Wed. Same design maybe a different model. we bought the MG6120. If things don't work out maybe we'll send you some more targets. Great video Buddy!!

[RamblinAround]

@805ROADKING These things happen....for all I know, Jordan probably took a part out of it to build something else...lol I actually bought another one that is really similar. Printers are really cheap to buy these days...sometimes even cheaper than the ink cartridges that go in them.

[RamblinAround]

@SpeiraCrotalus I agree completely.

[pulse0000]

Take that no receipt,no return!!

[RamblinAround]

@pulse0000 I should box it up and try to return it now. That would be an interesting video...lol

[pulse0000]

@RamblinAround Yeah! Just tell them it had a tendency to jam ;-).

[Zmairo]

that doesn't look good for his right shoulder, nice shotgun, with heavy grain ammo I personally would have kept it at hip level. but one thing's sure, dead printer

[TeenageTesla]

@Zmairo i hold it off of my shoulder so i can pump it faster and still aim. it makes the motion easier for me for whatever reason. and it's hard to tell in the video because it looks like it bashes into my shoulder really hard but the stock of the gun actually never hits me. i'm use to how bad it kicks so i can brace myself for it. i don't recommend shooting it like that though.. lol thanks for watching! -Jordan

[Zmairo]

@TeenageTesla right on! didn't mean to rub nothing in there, if you took it bad or not

[RamblinAround]

@Zmairo Thanks for watching. Jordan has been taught the correct way to shoot, but he kind of does his own thing....whatever gets the job done I guess. ~Jeff

[TeenageTesla]

@Zmairo haha i didn't. sorry if my comment sounded a little bit snappy, i didn't mean for it to.

[dusthaze]

That's one dead pigeon.

No more paper jams for that turkey,.

Btw, great editorial. ie fade in, fade out, fade to black, slow mode,

good gonzo cinematography.

[RamblinAround]

@dusthaze Glad you liked it. Thanks for watching..we appreciate the comments.

[markieman3000]

blowed it up REAL good lol

[markieman3000]

shoulda used triple 0 buckshot lol

[RamblinAround]

@markieman3000 That's exactly what we were thinking. I think buckshot would have really demolished it. Thanks for watching!

[boredmud]

do you think the printer learned it's lesson??

[RamblinAround]

@boredmud I'm not sure...we contemplated running it over with the truck and then setting it on fire too.

[boredmud]

@RamblinAround lol do it hahahahahaha

[Busia1949]

Wouldn't it have been under warrantee still? Seems like expensive target practice...

Oh well, good shooting...

[RamblinAround]

@Busia1949 Maybe a little wasteful, but it sure was fun. Thanks for watching!

[coolkat902]

I believe the printer is in printer heaven, playing taps now.

[RamblinAround]

@coolkat902 Yeah, I believe it's dead. Thanks for watching!

[crosspecans]

aint nuttin like a pump shotgun!! waves~~~

[RamblinAround]

@crosspecans Thanks for watching!

[SneekySnakeOO]

P.C. Load letter?..... THE F*** das that mean!? lol this makes me think of office space.

[boredmud]

@SneekySnakeOO lol i was thinking the same thing, office space

[RamblinAround]

@SneekySnakeOO That's one of my favorite movies. Thanks for watching!

[PonyPower71]

LOL that was just way too much fun.I have an HP that needs that treatment.

[RamblinAround]

@PonyPower71 It honestly is a lot of fun. Good way to relieve a little stress..lol

[tbrad1234]

@RamblinAround  Great video!

You never fail to impress! Keep up the good work!

[RamblinAround]

@tbrad1234 Thanks for watching, we appreciate the comments!

[phill903]

Nice shooting Jordan, that printer didn't have a prayer lol.

[RamblinAround]

@phill903 Thanks for watching, we appreciate it!

[MultiJacob123]

second

[RamblinAround]

@MultiJacob123 Thanks for watching!

[ThePandaPaddy]

first

[RamblinAround]

@ThePandaPaddy Thanks for watching!