How to install a box mitre on 5k gutter system

[alicianchuck08]

yea, too many screws and mitres should go on after the gutter is up, that way too long for 1 mitre

[AK47HEAVYMETAL83]

rivets or screws, they're both fine, as long as you down screw/rivet it from the BOTTOM, if you did, you better seal the hell out of it

[frogger893]

HACK

[jsblgb65]

Why on earth would you screw through the bottom? And why would you use screws, trash hangs on them. Two rivits on front face, two on back face, NOT through bottom. Poor installation.

[dclu19]

use rivits looks better..atleast i think so

[csfe00]

never screw the bottom of a gutter and install your miters after the gutter has been installed.......come on.

[mightydisciple]

To many Screws very ugly.........Been doing gutters for 12 years never once did it that that way, And my corners don't leak....

[marty0866]

my 5yr old son could do a better job than u guys and i love how u put screws in the bottom of the gutter ... retards

[therockkkkher]

good vid 5***** what kind of sealant are you using?

[veneno1969]

lol, dude you need to know how to cut a 45 strip mitre, that's garbage

[nipsta3]

do you ever put your gutter on the outside of the miter box so that water naturally goes over the gutter... like saying you were giving the gutter some slope? thanks man nice video

[AllColoradoExteriors]

Never have because the sealent in the joints should be enough to cover both sides and the ends.

And they only make the weatherguard system I use go on the outside. Hope this helps good luck!

[meatbossjr]

do u ever run across the problem with the screwhead in the back getting it past the gutter apron? im in omaha and i do new construction we hant the gutters using hangers to fasten but initially sliding the gutter under the apron then tapping a spike in to set it so it slides when we get to the corner. i do all the miters from the roof unless steep via ladder. thanks

[AllColoradoExteriors]

yes i have ! Ther Are two way to fix it one is to use A 1/4" FLAT HEAD or a nail that will allow you to slip it in and seal it. good luclk let me know how it works!

[lesdana08]

I tell ya you guys ROCK!! Again thank you for these videos. LOVE the music in the background too :)