Airplane scale models in metal / P-51, P-38, P-47, Spitfire, PT-17, B-17, F4U, Bf109, FW 190.

[delta07ism]

P-38= instant subscribe

[RoboVT102]

How did you make the engine and every control surfaces work like that. Your truly the worlds best modeler.

[rojasbazan]

@RoboVT102

In some of my videos (Junkers G24, Vough Kingfisher) you can appreciate part of the hand work on the engines (lots of photos about the construction -step by step- on my website). This year I´ll start working on my first tutorial DVD for teaching my techniques and tips. Thanks for watching my videos.

[jose1967]

I can't beleave this, you are a genuissssssssss

[rojasbazan]

@jose1967

Thank you, Jose!

[no1dirtbag]

Truly amazing!! Incredible!!! Now that is talent!!!!

[rojasbazan]

@no1dirtbag

Thank you!

[jonesy3756]

Hi I think your work I just incredible you have a real talent to do such detailed work. Thanks for sharing it with us, I would love to see some more and see you at work in your work shop. Again brilliant work.

Thanks AJ

[rojasbazan]

@jonesy3756

AJ, I´m glad that you enjoyed the video. Thank you!

[thePDWarrior]

Wow! I used to think I was an artist, but after seeing these video's of your I am truly humbled. Wow...

[rojasbazan]

@thePDWarrior

Thank you for your kind comment!

[chugors]

Mi muy estimado Guillermo, que bueno saber nuevamente de usted, me imagine que en tooodo este tiempo de relativo "silencio" en YouTube, estaria creando nuevas maravillas como es su costumbre (espero pueda presentarlos pronto).....son verdaderas obras de arte y usted el mejor artista de lejos...muy felices fiestas para usted y su familia.

[rojasbazan]

@chugors

Querido amigo, tanto tiempo. Actualmente estoy trabajando en un Zero con muchísimos detalles. Cuando esté listo subiré el video a youtube. Luego me dedicaré durante unos meses a editar el primer DVD comercial con todas mis técnicas. Saludos y deseos también de un muy buen año!

[70judgeman]

Don't know if I commented on any of your videos before, but your work is truely stunning. Just some awesome talent you have.

[rojasbazan]

@70judgeman

Thank you, Andy!

[fbrown172]

Amazing craftsmanship!

[rojasbazan]

@fbrown172

Thank you.

[daxdadog]

You are the master...the Michelangelo of modeling!

I have never seen better work...ever.

You inspire us all!

[rojasbazan]

@daxdadog

Thank you for your message, I appreciate the kind words.

[bonetrainmusic]

astounding. a master builder and artist. jaw dropping.

[rojasbazan]

@bonetrainmusic

Thank you for your kind comment

[1916holton]

I would buy one of your models, i know what it takes to do this kind of detail. Price is no object

[SlyDawg951]

Just awesome

[MurcoGLI]

After building models, even professionally, for 30 years you work humbles me! These are incredible works of art, my friend, and I'd also like to thank you for sharing them with us. One question, do you cast the engine components?

[rojasbazan]

@MurcoGLI

Thank you for your kind comment. No cast, all engines are handmade (watch the video on the OS2U Kingfisher and photos on my website).

[nelsongtj]

outstanding!!! 

[rojasbazan]

@nelsongtj

Thank you!

[angryace13]

wow...

[uzriell1]

I think that's a real plane.. U just got a giant cat!!! ;op

Simply stunning work. Thanx for sharing

[rojasbazan]

@uzriell1

Thank you for viewing!

[syntaxerror9]

Fantastic once again!

Where i can buy these sort of kits?

Or, is it only home made?

[stig99914]

Mate, I have to stop looking at these vids before I quit my life long hobby. I can't even do that to a plastic kit, let alone fabricate each and every piece. Sorry to say this but I wish I'd never looked. And don't say " It's all about having fun......" Bollocks!!! It's all about doing this. And I can't. Honestly, I'm properly angry. Pig Sick....AAAARRRRGGGGHHHH!!!!!! Seriously Awestruck. And Gutted!!! Where the hell was I when the Talent was handed out?

[tonygagey]

You truly are very gifted my friend please keep it up!

[rojasbazan]

@tonygagey

Thank you!

[keanoscarermitano619]

They look so real!

[rojasbazan]

@keanoscarermitano619

Thank you for your comment, Kean!

[kiwibob72]

amazing, no other word for it really!

[kiwibob72]

amazing, no other word for it really!

[rojasbazan]

@kiwibob72 Thank you for your kind comment!!!

[badasskickers]

@rojasbazan I can't belive what im seeing!! I just fainted........Those are just to good to be true. I wan't one..What is your price.. Please i won't be able to sleep at nights if you don't sell me one PLEEEEASE!!

[kiwibob72]

amazing, no other word for it really!

[rojasbazan]

@kiwibob72

Thank you, my friend!

[LiQuIDmEtALic]

I have always wondered in my life. When an artwork becomes a masterpiece? The answer is simple. The masterpiece could be watched over and over again and never boring!! Thanks for sharing your masterpieces!!!

[rojasbazan]

Thank you for your kind words, my friend!

[LiQuIDmEtALic]

I have always wondered in my life. When an artwork becomes a masterpiece? The answer is simple. The masterpiece could be watched over and over again and never boring!! Thanks for sharing your masterpieces!!!

[rojasbazan]

@LiQuIDmEtALic

Thank you my friend!!!

[motleyace]

wow simply amazing, your a craftsman without a doubt, do you build these for people to? if so i would be interested, i fly scale RC planes but these are beautiful birds, well done

[rojasbazan]

Thank you. Answers are on my website.

[realdevlin]

Just astonishing! How much time does it take on average to make such a model? It would be great to have this video with your commentary, I think. Best regards from student pilot!

[rojasbazan]

@realdevlin

Thank you!

An average little model (1/40 scale PT-17) can take two months of construction. An sofisticated, big scale model (like the 1/15 B-17) can take two years.

My future commercial videos will be complete, with all my techniques, tips and my commentary.

[CheckMySix]

Hi rojasbazan

ABSOLUTELY BEAUTIFUL work my friend.

You are with out a doubt the BEST scratch-built model maker I have ever seen.

The attention to detail is INCREDIBLE especially the engines,pure genius.

I have watched ALL of you videos and am amazed at the level of detail in all your aircraft .

You must be in your workshop 24/7 creating these masterpieces.

I salute you sir and keep up the great work.

Respect

CM6 :-)

[rojasbazan]

Dear friend, I am very glad that you enjoyed the videos and I appreciate the kind words. Thank you!

[flyboyfx]

Amazing work man!

[rojasbazan]

Thank you!

[MTFDarkEagle]

You should have told me to duct-tape my jaw to my face before i watched this vid! my god!!!

fabulous!!!!

Just a question, are those real functioning piston engines?

[rojasbazan]

Hello Lukas, the 1/15 scale is not appropiate for a real internal combustion engine, therefore these small hand-made engines are replicas with electric motors inside.

[solitajre222]

I see... The parts are aluminum?

how did you put the parts together, since you did not use any electric tools? Glue maybee?

Have you thought about making an Avenger, or Dauntless?

[rojasbazan]

I will make videos with my techniques. I´ve made the Douglas Dauntless and yo can watch the video here on my channel.

[solitajre222]

oh ok, thx =)

[solitajre222]

WOW! all of them are realy nice, but the best ones (i think) is the P-47 Thunderbolt and the F4U- Corsair...

[artocrat2009]

Fabulous! What gauge of aluminium do you generally work with - looks very thin - 0.2mm?

[rojasbazan]

I mainly use 0.4mm. Anyway I use many different gauges according structural parts.

[Bakkiebraai]

this is truly amazing work........you are a very gifted builder WELL DONE!!

[rojasbazan]

Thank you for your kind words!

[AwShitDude]

Truly amazing artwork. You even made moveable control surfaces! Do they actually operate from the yolk? Stunning attention to detail. One of a kind. Keep up the amazing work.

[rojasbazan]

Thank you for your kind words. Yes, some of my models features movable control surfaces operated from the cockpit by means of a control stick and rudder pedals.

[ggc161169]

En seguidor más en Venezuela... por acá y por Finescale!!! No caería mal un video del proceso de construcción!!! Es increíble su trabajo. Felicitaciones.

Guillermo Gonzalez C.

Maracaibo - Ve

[rojasbazan]

Gracias Guillermo. El proceso de construcción de mis modelos lo mostraré a través de libros y videos cuando me jubile (de algo tendré que vivir).

En 1983-84 le hice varios modelos a la Agregaduría Naval y Aérea de Venezuela en Buenos Aires; un F-16, un Caudron, dos AT-6, dos B-25, un Stearman y un C-123. Es posible que alguno de esos modelos (en escalas entre 1/24 a 1/40) esté en algún museo de tu país. Saludos.

[fokkereta]

son grandiosos, un trabajo maravilloso, gracias por mostrarlos,, se ve que hay muchos modelos salidos de las lineas de produccion en la espalda,, un gran saludo.

Guillermo

[rojasbazan]

Muchas gracias colega y tocayo. Los artesanos que modelamos totalmente en scratch, debemos mostrar el resultado de nuestros esfuerzos para alentar e incentivar a los modelistas que potencialmente están capacitados para crear modelos con sus propias manos.

[dbernareggi]

Felicitaciones al mejor aeromodelista a escala del mundo!. Sus trabajos denotan tecnicas de perfeccionamiento que exaltan su capacidad autodidacta,

[rojasbazan]

Gracias amigo Daniel. Y usted es un maestro contando chistes.

[Fokker1974]

Sus modelos son espectaculares!

Los mejores que he visto.

Es un orgullo saber que su autor es argentino.

Si pude, visite mi canal y verá los modelos navales que construimos.

Un gran saludos!

Hernán - Bs. As. - Argentina

[rojasbazan]

Hola Hernán, gracias por tu comentario. Los felicito por esos barcos RC construidos totalmente en scratch y por la página web. Saludos!

[Fokker1974]

Sus modelos son espectaculares!

Los mejores que he visto. Me da gusto saber que su autor es argentino.

Si pude, visite mi canal, y vera los modelos navales que construimos.

Un gran Saludos

Hernan - Argentina

[rossmum]

Astonishing work. I envy your attention to detail and patience!

[rojasbazan]

Thank you, Alex

[harlock450]

Increible!!! otro admirador por aca!!!!

[southernrockdrummer]

Guillermo this is modeling at it's highest form. Simply stunning.

[rojasbazan]

Thank you, Scott!

[svinehunden]

what's the scale?

[rojasbazan]

1/15 all models except the 1/24 Stearman

[svinehunden]

excellent work... they look really awesome but you already know that... ;) how long does it take you to make one?

[rojasbazan]

1/15 scale models take 1-2 years to complete (according to level of detail and type).

1/24 scale take 3-12 months.

[cristaliee]

Mister Rojas Bazan: Que maravillas......tiene razón su admiradora , es usted un GENIO

José Enrique Garay.

[cristaliee]

Sos un genio .

Tu admiradora Nº1 despues de tu esposa.......

MFRB