My Italian 50cc Motorized Bicycle

[Hardcoreredneck9]

Do you sell the kickstart kit and would it be able to fit on another bike engine kit?

[lavernlarsen48]

This is a very "marvelous" video. =p

[signetroup]

This video went viral on Tajikistan

[Rhinoch8]

What kind of clutch do you have?

It really is beyond awesome! I would add some custom aluminium carters though.

CHALLENGE : And if your run it on wood gas you are my god!

[coolio8444]

shift kit on that would be sick



[mrhockey50]

filmed with a blender..

[coycoy75basualdo]

where can i get the engine ?

[Joshash21]

nice wheels also what song is this

[Schirginator]

is that a GT LTS frame?



[marknew91]

Most people who clicked thumbs down probably haven't seen the 40 mph up hill video!

[Back7sword]

Doesnt that exhaust burn your thigh??

Nice ride..

[pyroman675]

dont you roast your nuts on the exhaust

[MultiJofi]

that`s a yamaha dt 50 engine. a japanese engine

[EZRider063]

@MultiJofi Its a Morini, an italian motor.

[MultiJofi]

@EZRider063 oh sorry i thought it looked like a dt 50 engine. again sorry.

[santerre1974]

@MultiJofi thats no good get a good motor .. and change that 500 cc muffer

[JaySyrinx]

how do you keep from burning your nuts on that exhaust pipe? ..wait I think I guessed.

[cobrachoppergirl]

Cut off your pedal arms, and instead of running the drive chain to a sproket on the back wheel, run it straight down to where your pedal axle is, and attach the sprocket there. Then your power is transferred through to the other side, and you can use all your 15 gears to accelerate or keep the motor in its optimal torque range. Make some new fixed footpegs to rest your feet on. You already have a kickstart, you don't need any pedals to start.

[marcosvaldivia678]

have you fallen down while riding it? thats too much power on a bicycle. Then the exhaust that shits huge. i bet youve gotten burned on it. other than that its a sweet ride I especially like the engine. Not like the chinese piece of shit that they make. it looks good to ride.

[ippolix]

ti si cuociono i maroni!!! 

[Ogmosic]

If you had to guess what your bike is worth, what would you say? What type of forks are those?

[songchanger100]

ride it!!!!!!!!!!!!!!

[LikeAVideo]

5.8 hp o.0

[johnbevington]

I didnt mean to remove my comment, my you tub pg. was not working right, if you want copy & past it from your email they sent you.

I ordered some ½ links for my chain in order to hopefully not have to use a chain tensioning device, but well see if its close enough.

[LOlamVaEd]

Question for EZRider...do you have to register and insure your bike, for street use, where you live? Is 50cc legally a "non-motorcycle", where you live? How much HP does it generate? Thanks, in advance, for your reply

[haggis240]

i am going to build one but i was thinking about putting in a gear box

[pyroman675]

you got it all on that bike all hal

[christophersboy]

too much exhaust??

[EZRider063]

Not really because the expansion chamber is made for a 50cc BZM pocketbike.

[Samstorey1234567]

@christophersboy he's probably got it new and is breaking it in with more oil than neccisary, thats what i did with mine

[lolzordje123]

front sprocket 13, rear 53 thats the best, don't put too much tension on the chain as youre doing now, its too tight, it can snap you know

[EZRider063]

The chain on the bike wasn't that tight. I made sure it had an inch of chain travel. Its really hard to snap a 415 chain.

[reap62]

id scrap the gas tank and put like a 3 or 4 liter tank on it and just ride it everywhere

[TexomaLover]

I dig the MUSIC! Who is it??

[EZRider063]

To be honest...I don't know. I got it off of the youtube audioswap playlist.

[DanDavM]

Paint the tank black, and your complete.... sick bike man.

[Manhappy2007]

Pedazo de Motor !!!!!

Y a que velocidad correra??

[Rbbto123]

i have better hydraulic discs on my bike :P

[Lukeschedel]

Dude oh my god, Your bike is amaziing, I have one of those kit engines on my really good norco bike but im having so much trouble with it it seems like these things are designed to break =/

Where di you get that engine? =o

I need something like that Sooo badly please reply dude

[EZRider063]

The engine alone cost me $525 a year ago but its now on my SCSW Full Suspension Bicycle and the motor is stronger than ever. You can't beat the duribility of these motors. I would have gone through 6 chinese motors compared to the Morini Motor. Plus having that extra power is an added bonus!

[PonchoLopez]

3.2 s6e is more comparable to a china engine but still better and faster with a stock china 44t. This 5.6/6.4? will probably get someone hurt if they don't build on a good frame/ wheel bearings. If you want a riot go with the one in the video, and mount it well on a good bike,otherwise save a few bucks for the exhuast and get the s6e $420 ish(maybe less). I did, more than happy.

[EZRider063]

I couldn't agree with you more on the 5.8/6.4 motors. I use to always check my aluminum frame for cracks after riding because of the speeds. I took the motor off this bike and put it on my Santa Cruz Scooter Works Full Suspension Boxer Frame and feel safer. Dean at SCSW made a one piece rear hub that uses larger sealed bearings and a solid axle. My new bike has been super reliable. It's great to ride hard all day and not have to worry about breaking down and pedaling or repairing.

[player11900]

how much money did that cost you

[3xst7]

That's a phat bike some one needs to mass produce this. n Please please the name of the Song :)

[ARXHMalakas]

the echaust design and layout sucks

[feelaman153]

:o wow..... man nice ride!!!!! me personaly think fricton is better =]

[ebalvsehvrot]

exhaust tube`s so looooong and big)))))

[Jrileymoto]

Thats a lifan engine eh?

[EZRider063]

No, Its a 50cc Italian Moto Morini 2 cycle motor. I've done a few mods to it like: Bigger carb, carbon fiber reeds and porting. It revs up to 15k.

[vidsrkewl]

thats soooo sick i wish i was mechanical

[ThomasXp]

wow realy nice job with ... everything

[sjf91]

super badass! and it looks like a weld free job! which is what i need seeing as i can't weld (dont know how and no welder)

it looks like a lean motorcycle lol

[wabashofutah]

How did you mount such a big engine on it? Awesome job please upload another vid, I want to see it in action!

[AmericansSexualPreds]

it snot big is just 500 cc u cna mount 70 cc too

[lilpunky69]

thats a really badass setup!

that thing looks great!

did you do it yourself?

[manny1fun]

muffler in bad place get burnt

[EZRider063]

The pipe only gets warm because I have a heat sheild covering the expansion chamber. During the summer I rode in shorts all the time. Its hard to see it because of the quality of the video but if you go to the link in the info section there are pictures of it. Thanks

[werf4]

Was the bike an old 'gt lts' ?

[TimmyRebel1975]

its badass man...do u know the website for the kit?

[asopusa1029]

its nice...i wish i have them too...

[beardedoneder]

EZRider063: how do you avoid burn from that  tailpipe?

[EZRider063]

The pipe only gets warm because I have a heat sheild covering the expansion chamber. During the summer I rode in shorts all the time. Its hard to see it because of the quality of the video but if you go to the link in the info section there are pictures of it. Thanks

[sanokai]

do you need license to run it?

[EZRider063]

No but I think you need to be at least 16 and wear a helmet.

[TheNoisePolluter]

that's an X-factor red colored large liter tank, cool

[22lambo]

What is the tank for? I can find it.

[TheNoisePolluter]

It's a go-ped brand scooter, they don't make those X-Factor colored tanks anymore, normally the tank are grey or white.

[22lambo]

Ya, I wanted to get one for my goped.

[TheNoisePolluter]

LoL, I gave awhile ago, there was one place that had a few ones, but they're gone now

[22lambo]

:(. They look so good. I wish they still made them.

[GGBULLETz]

that exhaust must get really hot and hurt

[intercept77]

Will that fit on my Cannondale? It has an 18" frame. Very impressed with what I see.

[EZRider063]

It should fit. We put one on a 17" frame and my LTS frame is an 18" Frame

[rapsy123]

dean at pipelyne is the best he makes the greates quality stuff, and everythign is going to work, he is a real nice guy also and he will allways make sure you are satisfied in the end

[Whytsaber]

hey! that's more like it! a real bike! gt LTS! i remember those bikes! howis that rear drive chain? sloppy or no?bike looks good :{'

[EZRider063]

There's only one place to get the kit. Call Dean from Pipelyne @ (408)279-2307