What an idiot! He uses a WOOD bit, and puts the outer ring on the inside of the fridge, wow! DON'T FOLLOW THIS POST IF YOUR BUILDING YOUR OWN KEGERATOR!
Just because it gets self-posted on the internet, it doesn't mean they know what they are doing. You are absolutely correct, this is the kind of idiot you don't want to learn from. God help us if he ends up being an engineer at Boeing, so many idiots, so little time to find out how dumb they really are in this lifetime.
That has to be the most disgusting display of craftsmanship that I have ever seen. If you are going to buy tools, learn how to use them before you embarass yourself on an internet video.
Cool but 2 things, as someone else said the black flange goes outside and use a big washer on the inside. Also what your calling a "tap" is not a tap its a faucet and shank. The Tap would be the keg coupler which "taps the keg. Cool video though. I'd use a 7/8 or 1" hole saw bit if you can for the shank hole, its a little easier to work with.
Just confirming that the music is by Richard Cheese. He has several albums out, they are all pretty funny. You should check them out if you like it. Also,yes..the drill bit is 7/8.
You did a nice job on the conversion but you put the black plastic flange on the inside of the shank when it should go on the outside. This not only helps it look nicer but reduces stress on the outside where you drilled through the metal. A less attractive looking washer could be put on the inside if additional support was needed. Also a picture of a full keg inside and working would be a nice touch to see how tight the fit is etc.
Hard to watch with that Cloverfield camera work.
dsgh55978 1 year ago
What an idiot! He uses a WOOD bit, and puts the outer ring on the inside of the fridge, wow! DON'T FOLLOW THIS POST IF YOUR BUILDING YOUR OWN KEGERATOR!
lwlampy 1 year ago
That dude could have cut the hell out of his hand when he was cutting the door shelf.
bradhallacy 1 year ago
look up the How "To Beat WMG Copyright!" youtube video and it will show you how to unmute your video
bevoburn 1 year ago
pro
jewsh666 1 year ago
Too loud...just too loud.
jimmyfuckinmusic 1 year ago
I Have made about 20 Kegerators For Friends and Selling and that Black Lip is not a Washer it goes on the front....
TruthBeKnown2 2 years ago 5
@TruthBeKnown2
Just because it gets self-posted on the internet, it doesn't mean they know what they are doing. You are absolutely correct, this is the kind of idiot you don't want to learn from. God help us if he ends up being an engineer at Boeing, so many idiots, so little time to find out how dumb they really are in this lifetime.
bjcpc0337 1 year ago
Talk about a tool moron. Ever heard of a hole saw? Your using a wood bit on metal!!!
dragonwhelper8 2 years ago 7
How about a hardhat and reflective vest to add to the safety factor.
mmhbs 2 years ago
who cares how the inside looks
you shoulda hooked up some beer and showed up the pour.
ruffdeezy 2 years ago
Flange... On the ouside.
SuluSuluSulu 3 years ago
i liked the video up until you hacked the inside with duct tape.
work gloves are gay.
5/10
scubadiver75 3 years ago
That has to be the most disgusting display of craftsmanship that I have ever seen. If you are going to buy tools, learn how to use them before you embarass yourself on an internet video.
trainfever1 3 years ago
Put the flange on the outside where it goes and youre golden- Nice work.
axis714 3 years ago
Really, are the gloves necessary? Careful I might draw on myself with that pencil and get lead poisoning. Gronk!
aceruss1986 3 years ago
God! I had nightmares of the Wedding Singer when I listened to the music.
gruversm 3 years ago
Thats richard cheese. swankalicious!
Ryanalp 3 years ago
This has been flagged as spam show
niceeeeeeee vidddd check mine out on meetyourfling(.Com)
murphy
362012
aatmaa 3 years ago
Cool but 2 things, as someone else said the black flange goes outside and use a big washer on the inside. Also what your calling a "tap" is not a tap its a faucet and shank. The Tap would be the keg coupler which "taps the keg. Cool video though. I'd use a 7/8 or 1" hole saw bit if you can for the shank hole, its a little easier to work with.
joeysixtysix 3 years ago
Hey Everybody,
Just confirming that the music is by Richard Cheese. He has several albums out, they are all pretty funny. You should check them out if you like it. Also,yes..the drill bit is 7/8.
jeremysincolorado 3 years ago
Can you please tell me the names of the tunes and artist used in this video? Sweet tunes and the kegerator is pretty cool too!
crundle99 3 years ago
it's all by richard cheese. I think they're all from the album "i'd like a virgin" you should check him out. he's sweet.
theelsuavio 3 years ago
it's all by richard cheese. I think they're all from the album "i'd like a virgin" you should check him out. he's sweet.
theelsuavio 3 years ago
What size drill bit did u use to drill out the hole for the shank to fit in the door?
insanekamkze86 4 years ago
it says 7/8 on the bit while he is drilling. id guess that.
ericthechamp 4 years ago
You did a nice job on the conversion but you put the black plastic flange on the inside of the shank when it should go on the outside. This not only helps it look nicer but reduces stress on the outside where you drilled through the metal. A less attractive looking washer could be put on the inside if additional support was needed. Also a picture of a full keg inside and working would be a nice touch to see how tight the fit is etc.
blackheartbrewery 4 years ago
Very helpful!
akbiv 4 years ago
Coolest music ever, well done dude
higgrobot 4 years ago
LOL that song rules!!
12GSlug 4 years ago
now i'm thirsty!!!!!
awesome.
BBQkrewe 4 years ago