did you stay with same cam after putting turbo on ? by the specs seams like a lot of duration and valve overlap with 106 center line just asking for when i have cam made for mine thanks .car sounds fantastic
Yes this is after megasquirt, but before getting it tuned. This was just a base tune. if you notice i had to go rev the engine to get it to stay idling.
The car is being torn down right now to be turbo'd i will post a video when im done.
sorry man, i dont speak spanish. i think you are asking me what exhaust system. if so its MAC long tube headers with a 3" collector, a custom built 3" X pipe and Borla mufflers dumped at the axle.
Sounds Sweet! I bet its better in person.. One question.. You say it was too loud but did you ever set off alarms off idle? and did you have Turn Downs?
Yes it set off alarms, and it is dumped. hell i made a little kid cry one time. after that happened i realized i needed to make it a little more quiet.
They are the 3" in and out 12" body mufflers. i switched to the borla XS mufflers but they dont sound as good as the XR-1's, but they are more quiet like i wanted.
you dont happen to have the xr1s do ya? if so and you want to sell them let me know, I have a 87 coupe with 6 point cage 347 with a isky solid roller and ported performers and i also need some bigger heads but i love the way your car sounds..
Nice thanks for the info buddy
1986montecarloss496 7 months ago
Yes, 3"
slostang89 7 months ago
Is this a 3 inch exhaust ?
1986montecarloss496 7 months ago
I dont remember exactly, but i think they were around 12"
slostang89 7 months ago
what size bodies were these ?
1986montecarloss496 7 months ago
i like that plain engine look
ezcondition 8 months ago
haha thats baddass i dont know about your state where you live but i know its 90 db at 50ft away so that would be legal here in washington haha
LeeMurphyRobertson 8 months ago
No I went with a custom cam from Ed Curtis
slostang89 9 months ago
did you stay with same cam after putting turbo on ? by the specs seams like a lot of duration and valve overlap with 106 center line just asking for when i have cam made for mine thanks .car sounds fantastic
rms7430 9 months ago
I actually already changed it and turbo'd it. I went with an Ed Curtis custom grind
slostang89 10 months ago
im looking for a similar set up are you going to have to change the Cam since your running a turbo now?
The68Machine 10 months ago
This cam was .638 in .667 ex lift .254 in .264 duration @ .050 lift on a 106
slostang89 11 months ago
one of the best sounding mustangs on youtube. what size cam? beasty
tremail12 1 year ago
one of the best sounding mustangs on youtube. what size cam?
tremail12 1 year ago
the car sounds smoother, was this after megasquirt?
twynne2929 1 year ago
@twynne2929
Yes this is after megasquirt, but before getting it tuned. This was just a base tune. if you notice i had to go rev the engine to get it to stay idling.
The car is being torn down right now to be turbo'd i will post a video when im done.
slostang89 1 year ago
que sistema de escapes tiene tu carro ? y arbol de leva tiene ?
Street85Racing 2 years ago
sorry man, i dont speak spanish. i think you are asking me what exhaust system. if so its MAC long tube headers with a 3" collector, a custom built 3" X pipe and Borla mufflers dumped at the axle.
slostang89 2 years ago
Sounds Sweet! I bet its better in person.. One question.. You say it was too loud but did you ever set off alarms off idle? and did you have Turn Downs?
1mesterious 2 years ago
@1mesterious
Yes it set off alarms, and it is dumped. hell i made a little kid cry one time. after that happened i realized i needed to make it a little more quiet.
slostang89 2 years ago
is this the round case or oval case muffler?
mshred 2 years ago
oval case
slostang89 2 years ago
dude this car sounds sick! love it man! is there an x pipe in there, or just straight duals?
mshred 2 years ago
Its a 3" X pipe
slostang89 2 years ago
thanx mate :)
need some burnout vids :D
306pinto 2 years ago
ill try to get some up soon
slostang89 2 years ago
the best idle on hole youtube :D
love your car.
whats the info on the engine. are in the prosess of building a 331 stroker solid roller engine.
306pinto 2 years ago
Its a 347 with a doug herbert solid roller cam.
.638 lift intake .668 lift exhaust
.254 dur intake .264 dur exhaust
The heads are too small, they are 190cc heads that flow 290cfm @ .600 lift
The intake is a Vic Jr converted to EFI and i built the sheet metal elbow that sits on top
Its a C4 Transmission with a Tbrake and 4500 stall.
slostang89 2 years ago
which borlas are these I know xr-1s but which ones? I want some for my car but what are the deminsions?
87coupe1 2 years ago
They are the 3" in and out 12" body mufflers. i switched to the borla XS mufflers but they dont sound as good as the XR-1's, but they are more quiet like i wanted.
slostang89 2 years ago
you dont happen to have the xr1s do ya? if so and you want to sell them let me know, I have a 87 coupe with 6 point cage 347 with a isky solid roller and ported performers and i also need some bigger heads but i love the way your car sounds..
87coupe1 2 years ago