How to Install a TXV/ Rochester HVAC : Fern Creek Ky , Middletown Ky , J-Town Ky

[lemn1064]

lets cross our fingers thats the problem.....hahaha

[fritzhvac]

@lemn1064 Hey whats up Man !!!

Thank You very much for commenting !!!

[randymarcell]

Fritz. installed a new coil with a TXV already installed and a new condensor. The ntro holds so no leaks. But it will not pull the vacuum. I get a steady 1950 microns on the low side and 1350 on the high. The gauge works great. When I valve off the system, the pump pulls 325 microns on itself easily. Do I need to heat thesensor bulb? What could be my problem?

[fritzhvac]

@randymarcell Hey whats up Randy !!!

How long and how much Nitro , did you bubble test too ?

How long to pull to 1350 ?

I didn't pull schraders on my last one it took me awile to hit 350 over a hour , once I hit blocked off it will rise , American Standard says long as I don't pass 500 in 1 minute we are good !!!

Are you using 2 Micron Gauges ?

Man sorry your having a time with her Brother !!!

Sounds like you got a pin hole somewhere !!!

[davemustainee2]

how did you troubleshoot and find that the txv was the problem  ?

[fritzhvac]

@davemustainee2 My Testo 550 , watch Testo 550 diagnosing bad TXV !!!

[MiChAeLrIdEsBmX]

Just wondering, When you started loosening the line, it obviously let out the refrigerant. But I am curious, did you drain the system before that, or did u drain the old stuff and that was just a little bit of refrigerant left in the system?

[fritzhvac]

@MiChAeLrIdEsBmX Hey MiChAeL !!! I pumped her back to the unit , and locked her down so I would not loose my charge .

Mike there is always just a taste of refigerant left in the line set !

Man that was a great question !!!

Thanks for watching brother !!!

Take Care ,

Fritz ...

[MiChAeLrIdEsBmX]

@fritzhvac haha hey no problem. I only came across this video because I went to school and got my Gas fitter 2. I want to be a heating and air conditioning tech! I actually start tomorrow at a company and I'm soo excited! I almost got into union gas as a turbine operator but after the second interview they found someone more suitable for the position. oh well! I start tomorrow!

[fritzhvac]

@MiChAeLrIdEsBmX Hey Mike fantastic Brother !!!

Take your time , and listen to the fellas that you know are tryin steer you in the right direction .

Soak up everything you can , dont limit yourself to work , learn everything inside and outside of the box !!!

Good Luck Mike !!!

[FilterChanger]

It's got the delta p function...with temperature adjustment....if you've got a temp probe... you could probably use a pipe clamp for that.

[fritzhvac]

@FilterChanger Hey whats up man , I would love to see that , can you shoot a little footage ?

[FilterChanger]

sweet... it was mechanical.

[fritzhvac]

@FilterChanger Oh YEA !!! LOL ....

[Nutintoitbut2doit]

Nice job buddy. TXV man they can be great when they work but ooo when they go bad forget it. I see you used 3 differant tools to cut your pvc.

Also a big belly is a good place to rest your beer when there's no other place to set it down lol, I know from my own belly lol.

[fritzhvac]

@Nutintoitbut2doit Thank You Sir , I can't believe how the house feels , its a tri-level , and never really got cool up here on 2nd floor , you actually had to use a blanket last nite , I had her down to 65 last nite BURRR !!! ROFL ... She is actually cycling now !!!

I love it , hell I can play cards , and rest cold beer on mine , with room for a snack tray !!! LOL ...

[Nutintoitbut2doit]

@fritzhvac Ha Ha, I know what you mean brother lol.

Hay your house is the best place to try out new things, like tools, systems, t-stats, and so on, when a vendor gives me something new I try it at home before I try to sell.

Good video Mr. Fritz

[fritzhvac]

@Nutintoitbut2doit Hey brother , that is a great idea !!!

I love my TESTOS , and Milwaukee PVC looper (just made the job so much faster and cleaner), I want to get that Makita impact I see the fellas packin on here !!!

Thanks my good friend !!!

[Nutintoitbut2doit]

@fritzhvac Ya Makita is good too, it's made by Milwaukee, I use the Milwaukee impact 12 volt, It's a good little tool and it uses the same battery, also they have a little sawsaw, and I got a car charger with a extra battery. I have Dewalt hamerdrill and impact that works very well for the bigger stuff.

[fritzhvac]

@Nutintoitbut2doit Wow I did not know that was part of Miwaukee brand , yea one of the biggest reasons I wanted to go that way was because of batteries , my craftsmans are about gone !!! I like the car charger drill option !!!

Dewalt is the shit too , had a 18 volt hammer drill years back that got GONE out on a commercial job !!!

[dizziedallas]

This is great news!!That crazy to see the high side are almost identical from both videos the only thing that change was the txv feeding refrigerant . Nice VIdeo!! Your on the next level!!!!

[fritzhvac]

@dizziedallas Hey Brother I would have NEVER have known , without testos 550 !!!

That is a trip !!! Dude , its all about both !!! S.H. & S.C. !!!

Thank You , I can't even say enough !!!

[dizziedallas]

@fritzhvac A lot of people say 10 degree S.C. with high efficiency is all good but what about the S.H.!!! No problem on the help!!

[fritzhvac]

@dizziedallas If you do not find your super heat you don't have a CLUE !!! LOL ...

[dizziedallas]

@fritzhvac Yes you are right!! They say superheat , flowcheck piston.... subcooling TXV.. go to show you check out the whole system!

[fritzhvac]

@dizziedallas Hey this is the QUICKENING !!!

Its the whole ball of wax , not just one side !!!!

[dizziedallas]

@fritzhvac Are you saying it alive LOL!!

[fritzhvac]

@dizziedallas INCREDIBLE simply INCREDIBLE , damn dude its cold , freakin cold , NO HUMIDTY !!! It's gone !!!

[dizziedallas]

@fritzhvac That great!! I am glad it is in warranty!

[fritzhvac]

@dizziedallas Hey Dallas , I will be taking old TXV in monday morning for a quick exchange of cash !!! LOL ... I may hold onto bi-flow dryer !!!

[fritzhvac]

@PutSome5tankOnIt I really didn't think about it till I dropped the last screw !!! LOL ...

But it was always in the back of my head , 3 days worth of gutten closet and floor, to make momma a shower , made me think to take a little peak , shit brother I think I got dust to 2nd floor !!! rofl ...

Man , 5tank , NO HUMIDITY !!!

Dude I told you it was the sH!t !!!

Thanks Brother !!!!

[fritzhvac]

@PutSome5tankOnIt I'M FREEZIN !!!