dude that is awesome. i have problems with my truck tires going flat if they get to low and breaking the bead. i dont have any high pressure air to try to get it to seal again so i always have to bring it to a repair shop. its a pain in the ass. i'm doing this next time one breaks the bead. thanks man. and yes i have the right safety equipment too. and i'll use it
100% of youtube videos involving ether for mounting tires are done by men. This type of behavior is why we earn more money Ion average) than women, and die younger.
This guy carries more equipment than those heading into the Number 4 reactor at Chernobyl. The only thing missing was a helmet and a "Day-glow" jacket. If your that afraid to do something without all that gear, DON'T DO IT......
@thekingof7 OOOOOH! touchy!!!!!! Whats your problem, I NEVER commented about YOU, so I think the best thing to tell you is; Go and phone someone who gives a toss, what you think"!!!
@thekingof7 No; I don't give a toss about you at all. I just detest people who come on and make ludicrous and inane comments that make people react. You are typical of such buffoons, who I do wish would just comment on some irrelevant forum and leave people to enjoy what they view on YouTube in peace.
You know this is great! Short, to the point, and informative. No forever small talk, or stupid forever intro. Plus I like the way it was done. Nice job. More tips please. Thanks.
you could have just aired it up, by the time you stuck air to it, it had already lost all its pressure and come back off the rim again. haha :) its the idea of it that counts!
Thanks for the video - can confirm that the general idea worked on a hand truck tire, though we used hair spray and a match (and it took several tries, and half lit it on fire since we sprayed too much in the last time...)
I wish it had popped or something. all that hard work for NOTHING!!! I wouldve thought it would be funny, but without the condom he could seriously get hurt...
I've done this on a trailer tire... but I just used the propane torch to blow propane inside the tire for a few seconds... then tossed a match at it. Worked like a charm.
you could have just got a rope and put a wrench between the rop and wrap it around the tire and turn the wrench to tighten the rope. then blast it with like 60 pounds of air.
we do this all the time with pickup truck tires. Spray the fluid in all around then run a line of it across the tires and down to the ground and out from the tire. Light it and it will go over to the tire on its own. Sometimes ya gotta kick it
Dang, usually people use a long piece of cardboard or something. You have guts! Good job! I have sen where people will spray 1/4 of the can in there and wonder why it didn't work!
Thanks for posting this! I've been trying to figure out how to get my dolly/hand truck tires set for about 3 years and was about to give up! All done in seconds (being very careful of course in a safe area!!)
LMFAO.. the fire extingsher looks outdated to 1940.. LMFAO.... and what happend to your right hand with the glove.. dont make a vidoe and embaress urself.. LMFAO.. what a joke.. i do it with none of that on the trails because i know what the fuck im doing... learn ur tools and hopefully you wil catch on soon.. I was a rookie years n years back... but years of experience pay off.. you will get there some day.. 2 stars for the effort. but 3 minus for the BS of the missing items n false items
This comment has received too many negative votesshow
... the safety crap isn't really gonna help u if it explodes, no if u tire catches on fire completely then the extinguisher will help but the gloves and glasses aren;t gonna do anything
Wont explode, not enough in it (if you do it right) to damage the tire. Just enough to get a quick expansion in the tire. I've done this on military truck tires, 40" mudders off road, all the way down to tubeless 2 wheel dolly tires roughly the size of the tire he did. You do have to watch where the tips of fingers and gloves are though - they can get pinched when it expands - and it hurts like a mutha.
This comment has received too many negative votesshow
i was just stateing that if anything happens that the glasses really aren't gonna help much.. cuz the fize is just gonna go around them if ur not wearing the right kind.. and the kind he had, werent them...
My bet is that they "discovered" it while burning tires, noticing that some of the flat ones with rims expanded to seal themselves when sprayed with flammable liquids;-)
@zwielback it was discovered by russian arctic trofy travellers how else put a tire on a rim without equipment. They put gas in tire and then burnt the air out of it, puting it on a rim.
Can't tell you how menu times I done this with my tractor
XD
Mrcleanravemachine 1 week ago
dude that is awesome. i have problems with my truck tires going flat if they get to low and breaking the bead. i dont have any high pressure air to try to get it to seal again so i always have to bring it to a repair shop. its a pain in the ass. i'm doing this next time one breaks the bead. thanks man. and yes i have the right safety equipment too. and i'll use it
matttaylor817 2 weeks ago
This has been flagged as spam show
I wonder how many people are going to comment about how mythbusters proved this impossible.
MrBtXIII 2 months ago
that fire extinguisher sure looks reliable...... in 1950 maybe.
rocketstutorials 2 months ago
'bead sealed' man you did it terminator style
Synetearis 4 months ago 2
100% of youtube videos involving ether for mounting tires are done by men. This type of behavior is why we earn more money Ion average) than women, and die younger.
kendigjl 6 months ago
you forgot thouse ass gaskets for tiolets,
my3406cat 6 months ago
I can't stop hitting 7
twebb72 6 months ago
This guy carries more equipment than those heading into the Number 4 reactor at Chernobyl. The only thing missing was a helmet and a "Day-glow" jacket. If your that afraid to do something without all that gear, DON'T DO IT......
davetherave7 6 months ago
@davetherave7 you sir, are foolish.
thekingof7 1 month ago
@thekingof7 OOOOOH! touchy!!!!!! Whats your problem, I NEVER commented about YOU, so I think the best thing to tell you is; Go and phone someone who gives a toss, what you think"!!!
davetherave7 1 month ago
@davetherave7 obviously you give "a toss" seeing as you responded to a poorly constructed jab regarding a 5 month old comment. fggt.
thekingof7 1 month ago
@thekingof7 No; I don't give a toss about you at all. I just detest people who come on and make ludicrous and inane comments that make people react. You are typical of such buffoons, who I do wish would just comment on some irrelevant forum and leave people to enjoy what they view on YouTube in peace.
davetherave7 1 month ago
@davetherave7 but in order to detest someone you must first give a toss.
thekingof7 1 month ago
@davetherave7 btch
thekingof7 1 month ago
Gas tank behind the trailer lol!
xamboozi 7 months ago
+1 internets for safety equipment
fable9456 8 months ago
he sounds like a robot
goandskateful 8 months ago
You forgot your gloves!! You could blown your foot off because of that!!!
freespeachrulez 8 months ago
Tightness
buhrrito 9 months ago
doing it the dangerous way. $1.00
wearing gay safety equipment
while doing it. priceless
GTbmxconspiracy 9 months ago
Imagine getting your finger caught lol
intheshitter 9 months ago
your so dumb! eat my food! i love road killlll!
freshroadkilll 9 months ago
hi
I have a wheelbarrow tire thats come off its rim and wonder how I can get it back on
without removing the wheel as the screws are rusted and will not come off.
tailor7793 9 months ago
like a boss
xbmxnutzzx 9 months ago
You know this is great! Short, to the point, and informative. No forever small talk, or stupid forever intro. Plus I like the way it was done. Nice job. More tips please. Thanks.
djderka10 9 months ago
jeez man, watch my video response, thats how ya do it!
14ducksfan 10 months ago
The bead is sealed.
jrain2828 10 months ago
That fire extinguisher looks like it may have been the first one ever made...
elvishskills 10 months ago
Sounds like MICROSOFT SAM 0.o
eikojoosep 10 months ago
Take the valve core out & wear a face shield.
ladefreakndah 11 months ago
I've used that trick since I was 14 until I finally got an air compressor. Always used matches and never had the safety equipment though.
hemoglobinpie 1 year ago
wot, no hard hat, no high-viz?
mrkarlhey 1 year ago
you could have just aired it up, by the time you stuck air to it, it had already lost all its pressure and come back off the rim again. haha :) its the idea of it that counts!
Wallabydam 1 year ago
what a puss puss
chrisismename 1 year ago 2
he forgot the #1 thing neaded for the job a dum ass
tylerd1964 1 year ago
@tylerd1964 can't even spell dumb! Ha!
homenf 10 months ago
This has been flagged as spam show
My sister need cum inside mworld5.info
gfgfgtfggttr 1 year ago
@gfgfgtfggttr is your sister THAT BAD looking?
yamahonkawazuki 9 months ago
Shit! I'm tryin same thing with my Troybuilt tiller.... Dint work. New tires too
Jthetinman 1 year ago
Thanks for the video - can confirm that the general idea worked on a hand truck tire, though we used hair spray and a match (and it took several tries, and half lit it on fire since we sprayed too much in the last time...)
SlavemasterT 1 year ago
I wish it had popped or something. all that hard work for NOTHING!!! I wouldve thought it would be funny, but without the condom he could seriously get hurt...
LilReddneck 1 year ago
dum ass that is how you cause chamber fire
tiagra1125 1 year ago
@tiagra1125 no no no you thats how you seal the bead
smallenginemods 1 year ago
do you need to balance the tire after that?
chillincruisin 1 year ago
I've done this on a trailer tire... but I just used the propane torch to blow propane inside the tire for a few seconds... then tossed a match at it. Worked like a charm.
mx5rush 1 year ago
u queer usin safty glasses and gloves
beastytom 1 year ago
@beastytom Wait, if they don't use saftey equipment they are called retards or dumbasses, but when they do use it, they are queer?
matthew11174 1 year ago 8
there is like atleast 10 videos of ppl doing this on youtube, but not one ive seen has shown what exactly how its done. So thank you
DONTHEMAGICWON 1 year ago
HOLY SHIT!!
THEJEDEYEMASTER 1 year ago
small tires like this one are much easier to do with a strap that pushes the sidewalls against the rim, then i aint wasting my starting fluid!!
boomstickkid 1 year ago
Notice how fast he yanked those fingers away.
faffaflunkie 1 year ago
the fast expansion of liquid to gas (the starter fluid) inside the tire make it to seal
atomic1234567890 1 year ago
That extinguiser is so last century :D
seventytwoLV 1 year ago
haha they got board
xianshelang 1 year ago
you could have just got a rope and put a wrench between the rop and wrap it around the tire and turn the wrench to tighten the rope. then blast it with like 60 pounds of air.
xxbal1inxx 1 year ago
WTF :O
superms15 1 year ago
i got starting fluid its called little bottle of gas to put down carberator also not the safest thing to do!
gunny556fly 1 year ago
saftey goggles, protective gloves, vagina...
nachos1990 1 year ago 4
@nachos1990
he he he
squirt expert ?
michaelovitch 1 year ago
short concise upto the point
great video!
gutrp 1 year ago 3
Well done
MrDanoconnor 1 year ago
we do this all the time with pickup truck tires. Spray the fluid in all around then run a line of it across the tires and down to the ground and out from the tire. Light it and it will go over to the tire on its own. Sometimes ya gotta kick it
hondariderky 1 year ago
more fun to do that with a 22.5 tire
Dazed911 1 year ago 2
what is the extinguisher, gloves, and glasses for???
6Camel6Finger6 2 years ago 36
@6Camel6Finger6
the BBQ is just behind the trailer.
michaelovitch 1 year ago
ahhh, makes sense
6Camel6Finger6 1 year ago
starts on fire
vettet1 1 year ago
@6Camel6Finger6 lol saftey !!!
libra9750 7 months ago
@6Camel6Finger6
For fucking your mom hard and without lube.
JunkCCCP 1 month ago
@JunkCCCP lololololol thats sooo funny.
6Camel6Finger6 1 month ago
safety third...
pvcpipe123 2 years ago 3
LOL I love the sound this makes!
TechnologyGod 2 years ago
I did this on my zero turn mowers tire and it blew a hole in the midle of the tire. All my neighbors came outside. They thought it was a bomb.
mancogokartrider 2 years ago 4
yeah !!
you forgot the new bearings !
michaelovitch 2 years ago
what a fucking idiot, if his hand would have ben a little closer to that bead, his hand would have been in a lot of pain
ashho56 2 years ago
The only fucking idiot is you.
IF his hand had been closer... But it wasnt!
What a stupid thing to write.
samwaut 2 years ago
@samwaut his hand was close enough the way it is, and if if wasnt for the quick vibration of the explosion, his habd woulda been pinched.
ashho56 2 years ago
that was the end of the glove his thumb was far enough away inside the glove.
6030diesel 2 years ago
you only need 2 of those things not a whole fucking shop worth of shit
TipsyTunes 2 years ago 3
ride the tire flat xD!
xXxmidgexXx 2 years ago
lol
you said wear protective gloves... but you didnt.
lol trolling is fun.anyways id be scurrd to do that i want to try it out it really looks like it can come in handy.
SRZsmack 2 years ago
@SRZsmack He had the glove on the hand holding tire when he lit it.
outlawracer2229 2 years ago
perfection...this is a tubeless tire..that is why you need to seal the bead..there would be no "bead" to seal if it had a tube..retards
Zeus540 2 years ago
First 16 seconds: "blah blah blah" Light it already ;)
BikerTrashWolf 2 years ago 2
dude a one inch ratchet strap around the tire would have dont the same thing
rthom86 2 years ago
just not as fun tho
eAStcOASTEr91 2 years ago 2
Comment removed
DieselsAndDiodes 2 years ago
does
deathcrayon 2 years ago
This comment has received too many negative votes show
u sound like a big gay nerd and i hated this video
dav00ss 2 years ago
idk why but this is soo cool so simple
NotEnoughProductions 2 years ago
god that has got to be one of the oldest halon fireextinguishers ive ever seen i doubt it still has a good charge
silentknight2112 2 years ago
Comment removed
TheAwkwardBanana 2 years ago
u dont need 2
sandfordmill 2 years ago
Comment removed
TheAwkwardBanana 2 years ago
no since it has a turbe in it and no bead to seal so theres no reason at all
6030diesel 2 years ago
bike tires have tubes dude....
GODZILLAMANASS 2 years ago 3
Nice tip.
1beinki 2 years ago
you could pump that tyre up with just the compressor.
Brainiac83 2 years ago
Using the flammable liquid puts it on to the bead.
weedarr 2 years ago 2
I know hwta it does, but that specific tyre could be just simply pumped up.
Brainiac83 2 years ago
No because the tire is tubeless the air would escape out the rim walls without inflating the tire.
kpj200 2 years ago 3
not if the bead isnt sealed, you dumb fuck.
killerkowalczyk 2 years ago
mr wizard would do that with out safety glasses, what a douchbag
doggtowncowboy 2 years ago
Bonus for using safety equipment.
mzmadmike 2 years ago 152
Dang, usually people use a long piece of cardboard or something. You have guts! Good job! I have sen where people will spray 1/4 of the can in there and wonder why it didn't work!
opferte 2 years ago
can you get starter fluid in Australia...?
xkabbax 2 years ago
yeah...
you can also use brake cleaner or butane gas.
Transane 2 years ago
u can use anything flamable
Th3B1ackDeath 2 years ago
pro
tainterlakeisgreen 2 years ago
LOL I used to do that on my 18 wheeler, now I bought a sealer. Long story short the fire got out of control
hurraquio 3 years ago 5
Comment removed
juicio70 3 years ago
This comment has received too many negative votes show
OMG.
We are going to be sealing this here bead with starting fluid; but first lets think about safety. ???? um starting fluid + tire <safe thing to do?
jrusso8199 3 years ago
with all the safety shit im surprised he didnt pull out a condom lol
warzone110 3 years ago 184
lol true that
klch1 2 years ago
@warzone110 hahaha
quentinm1995 1 year ago
@warzone110 lmfao nice comment
twinkiesown 1 year ago
What are you? The fukin safety man??
thelawisafterme 3 years ago
nice =D
quart25 3 years ago
good trick, but who needs the safety glasses, fire extinguisher, and gloves?
bonderman2007 3 years ago
You obviously have`nt met my wife!
checkmybigboobs 3 years ago 5
Looks like the bearing need tightened or replaced on that hub. Good work with the bead seating :D
hippytyre 3 years ago
There is no bearing, it's an agricultural trailer with a plain bushing onto a fixed axle.
ColonelVandal 3 years ago
Ah right, it just looked a little wonky to me.
hippytyre 3 years ago
clap clap clap A+
InUsaWeTrust 3 years ago
its easyer to kick it it keeps youre tire from pinchin ur hand
nibbler125 3 years ago
Thanks for posting this! I've been trying to figure out how to get my dolly/hand truck tires set for about 3 years and was about to give up! All done in seconds (being very careful of course in a safe area!!)
Darnealo 3 years ago
and KABOOM! lol
ripetomatoes 3 years ago
good vid dood take no notice of the haters. some people just have nothing better to do
urbtree 3 years ago
Brilliant!
atomicFlyer 3 years ago
This has been flagged as spam show
LMFAO.. the fire extingsher looks outdated to 1940.. LMFAO.... and what happend to your right hand with the glove.. dont make a vidoe and embaress urself.. LMFAO.. what a joke.. i do it with none of that on the trails because i know what the fuck im doing... learn ur tools and hopefully you wil catch on soon.. I was a rookie years n years back... but years of experience pay off.. you will get there some day.. 2 stars for the effort. but 3 minus for the BS of the missing items n false items
mudnjeep44 3 years ago
what a prick you are
mudnjeep44 and morri908 who wants to hear your shit any way.
urbtree 3 years ago 4
This comment has received too many negative votes show
... the safety crap isn't really gonna help u if it explodes, no if u tire catches on fire completely then the extinguisher will help but the gloves and glasses aren;t gonna do anything
morri908 3 years ago
Wont explode, not enough in it (if you do it right) to damage the tire. Just enough to get a quick expansion in the tire. I've done this on military truck tires, 40" mudders off road, all the way down to tubeless 2 wheel dolly tires roughly the size of the tire he did. You do have to watch where the tips of fingers and gloves are though - they can get pinched when it expands - and it hurts like a mutha.
RetiredAFGuy 3 years ago 5
This comment has received too many negative votes show
i was just stateing that if anything happens that the glasses really aren't gonna help much.. cuz the fize is just gonna go around them if ur not wearing the right kind.. and the kind he had, werent them...
morri908 3 years ago
nobody asked for you bullshit.
sideburns2009 3 years ago
nice job and good way of instruction
on safety.. i'm tired of red neck style!!
booom!! tree guy went to heaven and what do we do with the tire now???
gerardo92506 3 years ago
what happened to the gloves?
skylinefan01 3 years ago 3
what next a dildo
ok4u2bstupid 3 years ago 6
ahahahahaha LOL
THENAMEISREMYSON 3 years ago
yea, let's all BLOW up a dildo
SpiritsoftheWolf 3 years ago
nice i'm totally doing that today, got me a new rim after blowing my tire on a pothole the size of kansas.
koglowa 3 years ago
thats crazy
spencer2829 4 years ago
....WoW!....goodjob
chauboii 4 years ago
N to think I waste a laod of silcon on my trailor tyres to set the bead when they were sat for 5 years flat!
ededdynova 4 years ago
Well done, and cheers for using the right equipment.
kingdomboost 4 years ago
GOOD IDEA.
MyLuckyCars 4 years ago
coolest thing i seen all day, and yes, i have no life
Cheddabob135 4 years ago
genius, pure genius great job
meatman3042 4 years ago
I wonder how the hell someone figured that out
debougie 4 years ago
Same question to mee too,
Who the first to
discover this
idea???
MyLuckyCars 4 years ago
My bet is that they "discovered" it while burning tires, noticing that some of the flat ones with rims expanded to seal themselves when sprayed with flammable liquids;-)
zwielback 4 years ago
@zwielback it was discovered by russian arctic trofy travellers how else put a tire on a rim without equipment. They put gas in tire and then burnt the air out of it, puting it on a rim.
Zoz3000 1 year ago
They figured that out in Iceland many years ago. For reinflating the tires on their snow trucks.
blagadain 3 years ago 3
Thanks I just tried it on my riding lawn mower tire and it worked!!
fawnhill 4 years ago
Awesome isn't it!
zwielback 4 years ago
nice
Bapesta916 4 years ago